About warning "enter data for payroll past retroactive accounting"

Hi,
When I am entering master data, a message is coming
" enter data for payroll past retroactive accounting"
although i m not enteringh payoll data,
is there some date setting whcih needs to b doine to avoid that message?

Hi
(Assuming that you have not resolved this.)
The message Enter data for payroll past (retroactive accounting) is generated because you are maintaining an infotype that has been flagged as payroll relevant and you are making a change to data that has an effective date before the last payroll run. Note that it is only a warning message so you can go past it.
Table V_T582A holds the settings that indicates whether the Infotype is Payroll relevant. Be very careful changing these settings make sure that the Master Data on the Infotype has no relevance for Payroll.
The Payroll Status (IT0003) Infotype for the employee holds the Last Accounted Date and the Retro Dates.
Hope that helps
Regards
Rob

Similar Messages

How to populate date & time when user enter data for custom table in sm30

Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in Advance

You have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
          INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
    IF l_total-vim_action = aendern OR
       l_total-vim_action = neuer_eintrag.
      MOVE-CORRESPONDING l_total TO s_record.
      s_record-zz_user = sy-uname.
      s_record-zz_date = sy-datum.
      s_record-zz_time = sy-uzeit.
      READ TABLE extract WITH KEY l_total.
      IF sy-subrc EQ 0.
        f_index = sy-tabix.
      ELSE.
        CLEAR f_index.
      ENDIF.
      MOVE-CORRESPONDING s_record TO l_total.
      MODIFY total FROM l_total.
      CHECK f_index GT 0.
      MODIFY extract INDEX f_index FROM l_total.
    ENDIF.
ENDLOOP.
ENDFORM.                    " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated.

Please do not enter data for payment method Cheque papel error in IT0009

Hi Experts,
Whenever i try to maintain bank details infotype for payment type C(Check Papel),the system is throwing error "Please do not enter data for payment method Cheque papel". As per SAP std, I had deleted the entries for bank key, bank account and bank control key and maintained IBAN field in IT0009.While saving i am getting the error""Please do not enter data for payment method Cheque papel" and I couldn't save the record.
Then i deleted the entries for bank key, bank account and bank control key and IBAN field also in IT0009. While saving i am getting the error "Fill in all required entry fields". System behaves as if Iban a required field in IT0009. Our bank details infotype is country specific.We made it country
specific through feature P0009 and setting in table T588M.As per our conf setting IBAN field is optional. Even though IBAN field is optional, this field behaves as that of a mandatory field in IT0009.Iam facing this issues only for a few countries like Spain,Italy etc.For other counties i am able to change of create Bank details record for payment type C.
I have checked in Payment Methods by Country in FBZP (Payment Method Classification is set to Check and BANK DETAILS box is unchecked) but still no solution. Do i need to check in any other setting.
Please shed some light on this issue.Thanks in Advance.

Hi Jobish,
It's weird but I tried the below method and it works
Here's what you can try in case you do not want to enter the bank details for payment method 'C'..
Tcode FBZP - > payment methods by country - > select payment method as 'C' and make below changes (make a note of these changes as you will have to undo them after saving the table):
a. Payment method by classification - select bank transfer
b. Reqd master record specifications - check the bank details options and select the options which you want to be entered (a/c no required, IBAN rqd, SWIFT code rqd)
Save the table.
PA30- > Edit any record once again and save it.
Again go to FBZP and undo the above changes, i.e, revert to the original entries and again save the table.
Try editing the record now in PA30 and it allows to save. This is the second weird workaround that I have come across and still not sure why
After above workaround, I didn't get any error while maintaining the record, for this or any pernr.
See if it works.
Regards
Neha

Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result HR_BIW_PP"
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Generate Posting Date for Payroll Periods"

Hi all,
What is the relevance of "Generate Posting Date for Payroll Periods" ?
table T549S
Rx

Posting Date is required after payroll run and exited then we have to post payroll results to accounts.After payroll run which date we have to post to accounts. Source is 01 payday...target 04 posting date....for ex If payday is 30th every month.....then posting date is after X days .....like you have to generate postinfg dates.
Mohan

What does enter password for what does cardDAV account "yahoo" mean on ipad 2

what does enter password for cardDAV account "yahoo" mean on ipad 2

I'm having exactly the same problem. I saw no further responses and am wondering if you resolved this. Just bought the newest iPad. I'm a comfortable user as I'm on my 3rd iPad. Never seen this asked of me. Incidentally I am also trying to resolve why I "can't connect to apple store". For that I have reset "network settings" & forgotten my wireless network. I'm starting to wonder if the CArdDAV and "can't connect to the apple store are related. I can reach the Internet via Mail & Safari. I have a weak g3 connection. Not able to download anything via that as it's slow right now. I am trying to restore my apps after a theft of my old one. I have quite a few apps I need to download and I can make none of them happen. And every time I reboot the "cardDAV password" request comes up, repeatedly.

Dates for payroll and time ( Ponts are sure for every answers )

Hi Peers,
I have a scenario where i have to capture the time related activates from 27 Feb to 27 March and the Payroll dates from 01.03.2007 to 31.03.2007 .
Now my problem is when the employee took leaves on 27 and 28 then according to the above config it should deduct the 2 days salary and paid accordingly.
Pls help how can i configure it .
It is very urgent pls help.
Nancy.

Hi Anu / Peers
Please read all the related queries.
If it is still unclear I will explain again.
I am configuring the Payroll for the dates 01.04.2007 to 31.04.2007
We are using the Negative Time Management.
Now the company wants is to configure the time realted activites from 26.03.2007 to 26.04.2007.
Now if the employee is absent from 27.03.2007 to 28.03.2007 so his time data should capture accordingly in the time proccessing of payroll .
Now what is a problem is it is assuming the values from 27.03.2007 to 28.03.2007 to as it was from last month and deducting in arrears.
Now if i know how and where to configure the time 27.03.2007 to 28.03.2007 then there will be no Problem.
So pls help me regarding this .
It is really urgent .
Hope all understand and pls give inputs.
Nancy.

I want to create RFC FM to enter data for employee in table pa0001

hi everyone,
i want to create either a RFC FM or a BAPI to enter employee data in table pa0001.
is there any other way to enter the employee data?
so plz help me by sending regarding RFC/BAPI creation.
thanx in advance.
from
jigar bhatt

Hi jigar,
1. HR_INFOTYPE_OPERATION
2. This is the FM to put data
in infotype 0001 (pa0001 table)
as well as other infotypes also.
3. But this is a simple FM
   (not rfc enabled)
4. For your requirement,
   u can create a Z FM,
which is rfc enabled,
and inside this Z fm,
call the HR_INFOTYPE_OPEARATION
5. Also consider the parameters of this FM,
   while defining your z FM.
regards,
amit m.

Is the personal budget template monthly or yearly? I am entering data for Jan. How do keep track of Feb? Do I have to make a whole new budget? If not, the formula adds expenses in a category together which would mean Jan. and Feb. would be added togeth

I think the personal budget template is a monthly budget and I have Jan. set up. When it is Feb., do I have to download a new budget?
Also, there is a pie chart and all the pie chart has 6 colors. If you have more than 6 categories, the colors repeat. Is there a way to, for instance, assign 10 different colors when you have 10 categories so you will have an accurate pie chart?
I am using an iPad and Numbers app.

You dont have to download anything, just duplicate the current tab and reset your numbers. (tap the tab once and you get a choice of duplicate or delete.) You could then summarize across tabs if you liked.
It is just set up as a way of tracking a period, your choice of duration.
I get paid on the 1st and 15th, with distinct budgeting concerns for both periods (times are tight.). So we would do one for each two weeks to see how we did. Maybe double the budget numbers to get monthly numbers on another tab to track that month. Maybe then copy paste that data into a YTD tab at the end of the month.
Whole bunch of ways to handle it. You dont have to stick with month by month tabs or files. Using some creative thinking, You can make it so on the YTD tab you type in a month or quarter and it shows that information through equations.
Jason

Enter data for document in document library

When I create a new document in a document library, I only see the upload dialog and I need to edit the document property after the doucment saved. Is there a way I can enter the information for the tile field while I upload file? Many thanks.

Thank you for your solution.
(1) There is no option for me to make the "Title" field to be required.
(2) So I created another columln and make it required. Now, I can enter the information with the new item. There is just litter bit confused that the "Title" field also show up. If I can change the "Title" to be required, that will be Prefect.

I entered data for an address book I called: Wine Stompers and cannot seem to access it.

I have seen the name "Wine Stompers" fly by on the screen, but am unable to find the book. Can you Help, Please

Hi fco43051,
Where did you enter the data? Was is a download? Or was it an addon? With more information we can better assist you, thank you!

FFresFF crashing and restore session has been crashing without warning or notice for the past two weeks every other day, losing my restore session open windows

several times in the past 2 weeks, i come back to my computer to find FF has closed. there are no alerts or notices of a crash. when i use restore session, only 3 windows are listed as "recently closed", when I have 20 or so open. i believe there have been 2 updates in that period. i have to manually go through 'all history" to find my missing windows!

every time I have a problem with FF recently, someone suggests this. I try it and learn nothing.

MBP apparently won't enter data for eBay auction!

MBP apparently won't transfer a jpg off the Finder to eBay. I tried both the MBP and a G4 PB using the same System Preferences settings. Only the G4 will complete the auction preparation.
Perhaps someone will let me know if I am doing something wrong, is it the MBP, or is it eBay? You might try it yourselves and let me know.

This may be nothing to do woth your problem, but I had problems with uploading via webpages & it was because Safari caching was disabled.
a 100% repeatable issue on my mac.

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

GL Account Master Data for all the inventory Accounts

Hi,
What is common & unique feature in the GL Master data of all the Inventory related accounts? Is it "POST AUTOMATICALLY" or some thing else
Thanks,
Lavanya

In addition to the 'post automatically' option, please also ensure the field status group selected is relating to 'material accounts'.

About warning "enter data for payroll past retroactive accounting"

Similar Messages

Maybe you are looking for