I want to create super-precise crop boxes. Can I create crop boxes from guides?

I am looking to make extremely precise crop boxes. I would like to position four guides in the shape of a rectangle and then create a crop box of that rectangle. Does Acrobat Pro include this functionality? Is there some other way I could achieve the same result?
I know that I can fine tune the margins in the Set Page Boxes window until the crop lines are perfectly aligned with the guides but that is very time-consuming and I was looking for a faster solution.

Thanks for the reply, Bill. I have already tried the snap to grid option. The problem with it is that the grid lines most likely will not be where my guide lines will be. Now if Acrobat Pro had a snap to guides option then that would help, but it doesn't, as far as I'm aware.

Similar Messages

When I want to create a pdf from a webpage I get:"cannot connect to server" why?

when I want to create a pdf from a webpage I get:"cannot connect to server" why?

Did you set you Preference im the right way? See
http://help.adobe.com/en_US/acrobat/X/pro/using/WS533B928E-576F-4dc3-AA14-73D08EEE8F20.w.h tml
the newer link leeds to https://helpx.adobe.com/acrobat/topics.html .
You could use the German link too:
http://help.adobe.com/de_DE/acrobat/using/WSa65464b4e07c3e0a781ee72f1298fed479c-7ffe.html
Hans-Günter

HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

You are most welcome

Want to create XML tag from the query

Here i want to create a xml output from the below code for the given P_repair_number can anyone help me for the code i have written
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
facing the above error when run from concurrent program
Procedure dfdfdf(p_repair_number number,
                          errbuf        OUT VARCHAR2,
                          retcode       OUT NUMBER) as
v_error_code NUMBER; -- error code
v_error_message VARCHAR2(255); -- error message
v_text_msg VARCHAR2(100);
cursor Rodetails(p_repair_number IN NUMBER) is
SELECT
dra.repair_number,
dra.repair_line_id,
items.concatenated_segments item_name,
items.description item_desc,
dra.inventory_item_id,
sr.incident_number sr_incident_number,
decode(dra.customer_product_id, '',dra.serial_number,cp.serial_number) serial_number,
ltrim(oeh.order_number) rma_number,
rstl.resource_name ro_owner_name,
fndl.meaning flow_status_name,
dra.status ro_status_code,
drtt.name repair_type_name,
dra.problem_description,
dra.promise_date,
rgtl.group_name repair_org_name,
decode(dra.customer_product_id, '',dra.item_revision,cp.inventory_revision) revision,
cp.lot_number,
dra.unit_of_measure uom_code,
uom.unit_of_measure_tl uom_name,
dra.quantity,
cp.instance_number ib_instance_number,
plkup.meaning ro_priority_meaning
FROM
csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
oe_order_headers_all oeh,
cs_estimate_details edt,
csd_product_transactions txns,
fnd_lookups plkup
WHERE dra.repair_type_id = drtt.repair_type_id
AND drtt.language = userenv('LANG')
AND dra.repair_mode = 'WIP'
AND dra.incident_id = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID = cp.INSTANCE_ID(+)
AND dra.flow_status_id = fsb.flow_status_id
AND fsb.flow_status_code = fndl.lookup_code
AND fndl.lookup_type = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id = items.inventory_item_id
AND dra.unit_of_measure = uom.uom_code
AND uom.language = userenv('LANG')
AND dra.resource_id = rstl.resource_id (+)
AND rstl.category (+) = 'EMPLOYEE'
AND rstl.language (+) = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+) = userenv('LANG')
AND dra.repair_line_id = txns.repair_line_id
AND txns.estimate_detail_id = edt.estimate_detail_id
AND edt.order_header_id = oeh.header_id
AND edt.line_category_code = 'RETURN'
AND dra.currency_code = oeh.transactional_curr_code
AND dra.ro_priority_code = plkup.lookup_code(+)
AND plkup.lookup_type(+) = 'CSD_RO_PRIORITY'
AND items.organization_id = cs_std.get_item_valdn_orgzn_id
AND dra.repair_number=p_repair_number
AND rownum <50;
begin
errbuf := NULL;
retcode := 0;
SAVEPOINT Create_external_orders;
--retcode             := FND_API.G_RET_STS_SUCCESS;
IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
    fnd_log.STRING (fnd_log.level_procedure, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER.BEGIN', 'Enter - PrintTraveller');
END IF;
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
--FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FOR v_rodetails IN Rodetails(p_repair_number)
LOOP
/*For each record create a group tag <G_RODETAILS> at the start*/
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<?xml version="1.0"?>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORDER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_NUMBER>' || v_rodetails.repair_number ||
                                   '</REPAIR_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_LINE_ID>' || v_rodetails.repair_line_id
                                || '</REPAIR_LINE_ID>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_NAME>' || v_rodetails.ITEM_NAME
                                 ||'</ITEM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<ITEM_DESC>' || v_rodetails.ITEM_DESC
                                || '</ITEM_DESC>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SR_INCIDENT_NUMBER>' || v_rodetails.SR_INCIDENT_NUMBER ||
                                   '</SR_INCIDENT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<SERIAL_NUMBER>' ||v_rodetails.SERIAL_NUMBER
                                 ||'</SERIAL_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RMA_NUMBER>' || v_rodetails.RMA_NUMBER
                                || '</RMA_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' ||v_rodetails.RO_OWNER_NAME ||
                                   '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<FLOW_STATUS_NAME>' || v_rodetails.FLOW_STATUS_NAME
                                 ||'</FLOW_STATUS_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
                                || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_TYPE_NAME>' || v_rodetails.REPAIR_TYPE_NAME ||
                                   '</REPAIR_TYPE_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROBLEM_DESCRIPTION>' || v_rodetails.PROBLEM_DESCRIPTION
                                 ||'</PROBLEM_DESCRIPTION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<PROMISE_DATE>' || v_rodetails.PROMISE_DATE
                                || '</PROMISE_DATE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_OWNER_NAME>' || v_rodetails.RO_OWNER_NAME ||
                                   '</RO_OWNER_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REPAIR_ORG_NAME>' || v_rodetails.REPAIR_ORG_NAME
                                 ||'</REPAIR_ORG_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_STATUS_CODE>' || v_rodetails.RO_STATUS_CODE
                                || '</RO_STATUS_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<REVISION>' || v_rodetails.REVISION ||
                                   '</REVISION>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<LOT_NUMBER>' || v_rodetails.LOT_NUMBER
                                 ||'</LOT_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_CODE>' || v_rodetails.UOM_CODE
                                || '</UOM_CODE>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<UOM_NAME>' ||v_rodetails.UOM_NAME ||
                                   '</UOM_NAME>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<QUANTITY>' || v_rodetails.QUANTITY
                                 ||'</QUANTITY>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<IB_INSTANCE_NUMBER>' || v_rodetails.IB_INSTANCE_NUMBER
                                || '</IB_INSTANCE_NUMBER>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'<RO_PRIORITY_MEANING>' || v_rodetails.RO_PRIORITY_MEANING ||
                                   '</RO_PRIORITY_MEANING>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</G_RODETAILS>');
FND_FILE.PUT_LINE(FND_FILE.OUTPUT,'</REPAIR_ORDER>');
END LOOP;
IF(retcode != FND_API.G_RET_STS_SUCCESS) THEN
                RAISE FND_API.G_EXC_ERROR;
              END IF;
              IF (fnd_log.level_procedure >= fnd_log.g_current_runtime_level) THEN
                fnd_log.STRING (fnd_log.level_statement, 'CSD.PLSQL.XXTNT_CSD_CREATEORDER.SUBMIT_CREATE_ORDER', ' In PrintTraveller');
              END IF;
fnd_file.put_line(fnd_file.log, 'Successfully completed PrintTraveller');
EXCEPTION
|| Catch all error.
WHEN OTHERS THEN
ROLLBACK;
v_error_code := SQLCODE;
v_text_msg := 'Fatal Error, Oracle Error is: '
|| TO_CHAR (v_error_code, '99999');
fnd_file.put_line (fnd_file.log, v_text_msg);
v_error_message := SQLERRM;
fnd_file.put_line (fnd_file.log, v_error_message);
end dfdfdf;Edited by: user12053530 on Apr 19, 2010 5:54 AM

However using SYS.ODCIVARCHAR2LIST makes sense if your query is a part of bigger processing (PL/SQL procedure or function) and you will do some processing depending on File_Type, like in this example (not compiled, could contain syntax errors):
DECLARE
l_stid           VARCHAR2(10);
l_address        VARCHAR2(30);
l_File_Type_tab SYS.ODCIVARCHAR2LIST;
cur_cursor IS SELECT STID,
                ADDRESS,
                CAST(COLLECT(DISTINCT File_Type) AS SYS.ODCIVARCHAR2LIST) AS File_Type
                FROM (
                      SELECT STID,
                             ADDRESS,
                             File_Type
                        FROM DUMMY
                GROUP BY STID, ADDRESS;
BEGIN
OPEN cur_cursor;
<<main_loop>>
WHILE (1=1) LOOP
     FETCH cur_cursor INTO l_stid, l_address, l_File_Type_tab;
     EXIT WHEN cur_cursor%NOTFOUND;
     -- Now do processing for each File_Type in l_File_Type_tab;
     <<each_file_type>>
     FOR i IN l_File_Type_tab.FIRST .. l_File_Type_tab.LAST LOOP
       -- for example:
       -- IF l_File_Type_tab(i) = 'SALES'
       -- THEN
       --   do_something(l_stid, l_address);
       -- ELSIF l_File_Type_tab(i) = 'TRANSFER'
       -- THEN
       --   do_something_else(l_stid, l_address);
       -- ELSE
       --   do_something_default(l_stid, l_address);
       -- END IF;
     END LOOP each_file_type;
END LOOP main_loop;
CLOSE cur_cursor;
END;

Using two T lists i want to create a UI, from which user can make selection

I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between.
I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly. Giving a lot of forms errors.
The same thing can be done in JDeveloper using a shuttle bean.
An example of the UI that i want to construct :
The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table, from this list selections can be done using the four buttons in the same way that i intend my form to do. This is the kind of UI i want to develop.
I'm very new to development in forms. I'm sure you people at OTN will help me.
Thanks,
Abhishek.

Hi Abhishek
What is happening by these
Copy(v_value, p_tlist_into); and
...This commans set list item value (list selection).
The most simple way to move all elements between lists is to populate the target list from record group, and the to clear the source list. The lack of the given method - order of elements will be same, as in group.
PROCEDURE Move_All_Elements (p_tlist_from VARCHAR2, p_tlist_into VARCHAR2) is
v_value VARCHAR2(100);
v_label VARCHAR2(100);
v_index_from NUMBER;
v_index_into NUMBER;
v_count_from NUMBER; -- Count elements of tlist_out
BEGIN
--v_index_from := Get_List_element_count(p_tlist_from);
-- Get_List_element_count never return zero!
v_index_from := Get_List_Current_Index(p_tlist_from);
if v_index_from = 0 then -- The source list is enpty
--fnd_message.debug('elements=0, so return');pause;
RETURN;
end if;
--v_index_into := Get_List_element_count(p_tlist_into);
v_index_into := Get_List_Current_Index(p_tlist_into);
if v_index_into = 0 then -- The target list contant only DEFAULT value
--fnd_message.debug('no elements, so clearing the list');pause;
clear_list(p_tlist_into);
end if;
v_count_from := Get_List_element_count(p_tlist_from);
FOR i IN 1..v_count_from
LOOP
v_label := Get_List_Element_Label(p_tlist_from, i);
v_value := Get_List_Element_Value(p_tlist_from, i);
--Add_List_Element(p_tlist_into, v_index_into, v_label, v_value);
Add_List_Element(p_tlist_into, v_index_into+i, v_label, v_value);
-- The commands are lower in a loop are not necessary.
-- The commands after the loop make too most.
--Copy(v_value, p_tlist_into);
--Delete_List_Element(p_tlist_from, i);
--v_index_from := Least(v_index_from, Get_List_Element_Count(p_tlist_From));
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from);
--v_value := Get_List_Element_Value(p_tlist_from, v_index_from + v_index_into);
--Copy (v_value, p_tlist_from);
--fnd_message.debug('done for one element');pause;
--exit when v_label is null;
END LOOP;
clear_list(p_tlist_from);
v_value := Get_List_Element_Value(p_tlist_into, v_count_from + v_index_into);
Copy (v_value, p_tlist_into);
EXCEPTION
when others then null;
END;

Using two T lists i want to create a UI, from which selections can be made

I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between. I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly.
I'm very new to development in forms.
If anybody has developed such an UI in forms, please help me.
Thanks,
Abhishek.

The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table. This is the kind of UI i want to develop. I hope the people at OTN would not dissappoint me.
Abhishek

I want to create an ISO from the 8.1 DVD on my old iMac

My current iMac is a 2011 i5 3.1, 1tb, 6970 GPU, 27 inch variety. I want to use this machine to create an install USB for my new iMac which of course has no DVD. I have a copy of 64 bit 8.1 WIndows on DVD. My current machine has Windows 7 installed, do I need to remove this before Bootcamp will give me the options of creating the bootable USB? Do I need to source the ISO somewhere else or can I create it from the DVD? I heard I can make a MSDN account, free at that, and download a trial 8.1 ISO image but I am concerned it might not work even if I give it a valid key.
Thank you.

an iso file is a cabon copy of an optical disc there are many a free program which can transform one to the other
http://hints.macworld.com/article.php?story=20060619181010389
more from the google search
osx make dvd into iso

Want to create a Report from scratch!!!

Hi,
I tried to create a report using the document provided by oracle but in vain. Could anyone give a guideline on how to carry on with this task. Or a link to where I can find an interesting user guide.
Thanks in Advance.

There is also a doc on our pages to get you started building templates ... very simple to get started:
http://www.oracle.com/technology/products/xml-publisher/xmlpclient.html
Look for the XML Publisher Templates by Example
then once you have had some practice ... take it to Apps
http://www.oracle.com/technology/products/xml-publisher/xmlpapps.html
regards
Tim

I've just finished building a new website with iWeb, I want to build a new site, how can I save the details from the first site?

Hi There.
I've been building a new website with iWeb. Its now complete, but I will need to keep all the detasils involved as I make amendments from time to time. Now I want to start a new site on a completely different subject. But every time I go to start the new site, it just seems to be 'papering' over the details of the old one. How can I begin a completely new site without overwriting the details of the previous site, and where do I save the original site details to for easy access.
Thanks,
Gerbles

To create a new site in the same domain file use the File ➙ New File menu option.
to give you this:
OT

I want to upload pictures to Shutterfly. Can I do this directly from Lightroom 5?

I want to upload pictures to a website that enables those who view the pictures to download them to their own computers. I have been using Shutterfly, but am open to using another if it's easier. It doesn't appear I can do this directly from Lightroom 5 but would have to upload from the files on my hard drive.
I also want to know if any Metadata I add to photos in Lightroom, such as descriptive text, would upload with the file so that it can been seen on Shutterfly. I want to add descriptions in Lightroom but don't want to have to enter them all again on a sharing website.

Apparently this plug-in will give you the ability to do this: https://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1797027
It will work with Lightroom 5.x apparently.
Tony Jay

Want to Create View as per Condition Fires After Parameter Form.

Hi ..
I want to create a report from a view,and that view would create after parameter form of that
report.
Example..
I want to select max(sal) of each Dept.where employee hired between 1-jan-2007 and 31-jul-2007'
I want when i Passes dates in Parameter FOrm
a view i.e select empno,deptno,sal, from emp created.
that means that view contains only data about that certain period
SO in Report Query i can write
select deptno,max(sal) from vw_employee
group by deptno.
This is just an example....my real problem is very hard and only can be done by doing create a view as per given dates in Report Parameter Form.
Waiting for Reply
Regards
Danish Hayder

Wrong ideea.
You should have the parameters in the report's query:
select empno,deptno,sal, from emp where hired between :p_start_date and :p_end_date
Why do you want to create a view in the report, seeing that it's best to use parameters.
Moreover, think that the oracle user running the report would have to have the priviledges to create views, which may not be good security policy.
Still, if you insist on creating the view when running the report, then you'd better create the view from a stored procedure, that would receive as parameter the SQL select for creating the view.
So, you'd have the stored procedure:
proc_view(p_select in varchar2, p_view_name in varchar2) is
begin
execute immediate 'create or replace view '||p)view_name||' as '||p_select;
end;
You then would compose the select in the afterpform trigger and call the proc_view procedure.
Note that I did not allow proc_view to execute immediate any SQL one would pass, for that would be really dangerous. What if one would pass to the procedure executing dynamic SQL the following: 'drop table my_table cascade constraints'?

I want to create using a tool from ESRI software download, any comments or suggestions

I want to create some maps from a downloaded software. Any suggestions.

Hello,
Thanks for looking into my poblem. But my question were
1. How to store the website security certificates into a pesonalized fiefox profile ?
To elaborate: How do I create a personalized firefox profile so that whenever I launch firefox using that particular profile , and open my particular website, I donot get any security certificate error. Basically I donot want to download security certificates everytime I open my website.
2. Every time I click on any file in my website, it asks me whether I want to save it or open it. I also want to store this decision (i.e. save the file ) inside my personalized firefox profile.
Thanks and Regards
Dhruba

How to create a table from an existing table with new column

Hi !
Please help me.
I want to create a table from an existing table with data and add two new column to the new table.
What will be the syntax?

craete table new_table as select a.*, 'somevalue' new_col1, 'somevalue'
new_col2 from old_table a;Also there is a pitfall - newly created table will accept column type and precision from the select statement, so further you can be needed to modify columns
if you want to have VARCHAR2 instead of CHAR for example:
SQL> create table new_dept as select dept.*, 'New data' new_col from dept;
Table created.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            CHAR(8)
SQL> alter table new_dept modify (new_col varchar2(8));
Table altered.
SQL> desc new_dept
Name                                      Null?    Type
DEPTNO                                             NUMBER(2)
DNAME                                              VARCHAR2(14)
LOC                                                VARCHAR2(13)
NEW_COL                                            VARCHAR2(8)Rgds.
Didn't see michael's post - it reflects the fix for this problem using CAST.
Message was edited by:
dnikiforov

Creating sales order from contract ISA R/3 Edition

Hi Forum,
Our scenario are
1 - customer select product from catalog and place order from internet
2 - sometimes, customer already have a contract with us (created earlier manually on SAP) and want to create sales order from internet referencing a SAP-contract.
For scenario No.1 - we can use standard SAP
For scenario No.2 - is there any standard way to do so? or we have to do customization?
Any suggestion are welcome.
Thanks a million.!!

Hello
"Contract Processing" is not supported out-of-the-box in ISA R/3 edition.
However, you have a good news. The OSS Note [788245 |https://service.sap.com/sap/support/notes/788245]- "ISA R/3 4.0: contract processing", explains how to implement this feature on a project basis.
We have implemented this feature successfully at few customers.
Hope this helps.
Easwar
http://www.parxlns.com

Is there a way to create still jpegs from video clips in iMovie?

I shot some video on Christmas day and imported them to iMovie 9.
I want to creat some jpegs from the video clips and print them as photos.
Is there a way to create a jpeg from a video clip and save the file?
Thanks for the info!
Len

Here is a method for extracting a still from iMovie 09.
Are you working in iMovie and realize that certain frames in the movie would be perfect as photographs? Here is how to extract them...
*To get a still frame from an Event*, right-click on the frame and select "Add Still Frame to Project". The still will be added to the end of the current project. Right click on the still frame in the project and select "Reveal in Finder". You will see a jpeg file that is highlighted. Drag this jpeg file in the finder to the iPhoto icon on your dock.
*If you want a still from a project*, rather than an event, the process is similar, except you right-click on the frame and select "Add Freeze Frame", and it adds the freeze frame at the end of the clip rather than at the end of the project. Right-click/reveal in Finder, drag JPEG to iPhoto icon in dock.
*If you are not using iPhoto*, and just want to save to your desktop, click Reveal in Finder as above, then COPY, then PASTE to desktop.
Hint: If you do not want to clutter up your iMovie Project with stills at the end that you would have to go back and delete, then create a separate iMovie Project just for your stills, and follow the instructions for capturing stills from an Event.
Note: If you do not have a right mouse button, then control-click will work instead of right-click.

I want to create super-precise crop boxes. Can I create crop boxes from guides?

Similar Messages

Maybe you are looking for