I want to display data from 1st form to 2nd form...

Hi
I'm having 2 Forms.In the 1st form i'm having Master & Detail Blocks.
By clicking button i'm trying to call another form.
In that form i what to see the Master Block Data should be displayed on the form.
So wht is the type of Canvas can i use or is there any other alternative way for this issue.
Try to help me in this
Regards
Siva

Go through this
1 form data display 2 form

Similar Messages

Want to display data in receipt form in Smartforms

Hi friends,
    I want to display data in receipt form in smartforms....Format is given below:
    Name : [fieldname1]
number : [fieldname2]        country code : [fieldname3]
n so on....It should display 1 record on one page and so on.......how can i go about it....
Regards,
Vijaya

Hi Vijaya,
First, you need to design the lay-out for your pages.
Say for example in your case you take a window XYZ (variable type) to print:-
Name : fieldname1
number : fieldname2 country code : fieldname3
Now you have some amount of data for this detail.
Say you print this data in a table.
After the last node for printing data, insert a command line under the last node (in main area of the table control).
And on the next page use the same MAIN window (or use next page of PAGE1 as PAGE1).
In other way, if you are printing a single record on a page.
Then this can be done by simply taking a loop statement in the main window of the page followed by text-fields (from internal_table into work_area).
Under the loop statement, in these text-fields you can simply print your data (using the work area) :-
Detail 1 : &wa-field_name&
and so on....
After the last detail (node), insert a command line and write 'NEW-PAGE'.
This will break your control on to next page and eventually one records will be printed on a single page.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

Problems Displaying data from RFC on Adobe Forms

Hi,
I have some Problems with creating an Adobe Form and hope, someone can help me or give me some hinds to some tutorials, which can help me.
I'm developing an webdynpro-application which get data from a R/3 via RFC-Call.
Context-Binding and so on is done and works. I created also an interactive form and can display some datas on it.
Here my questions:
I have an field 'unit' which shoulb be displayed on several positions onto the form. My problem is, i can display it only once. If i copy the field, there is no output in it. What can i do, to solve the problem?
From the RFC i get a table with several rows of data, i want to display on the form.
With drag&drop i can place the fields onto the form but they are displayed only once. I want one line for every row from the table.
What do i have to do? Are there tutorials which show the steps?
When I am not using a form, i can display the data from RFC in a table with no problems (i create a table ui and choose create binding from context menue). Are the nescessary steps for displaying the data on an interactive form the same.
I read something about creating a dynamic form design. Do i have to create it? What are the steps i have to do.
Many questions, but i hope that someone can give me some helpful hints.
Many thanks
Mathias Lange

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

Display data in tabular form

Hi,
i want to display data from data base in a tabular form, that is dynamic (the rows in UI is based on no.of records in data base) and one of data item is hyper link like
sno sname class
here sname is hyper link.
Thanx for ur help

Hi..
Actually I dont get you clearly..
I can give you some answer based on my understanding of your question..
When you get the data from the database you can convert the each row of data into DTO's.. Finally you can get list of DTO's.
Then in the JSF page you can use <h:dataTable> tag to render the table format of the DTO info..
If I didnt clear your doubt, please explain your question clearly..
Regards,
Joe

Display data from BLOB column.

Hi All,
I want to display data from blob datatype field, which contains HTML and GIF both files.
If I set it's property from file format IMAGE then i get data only gif.
if anybody have answer plz revert back...
awaiting...
Juned

Hi Juned
What I suggest is that you may have overlapping fields. One to show HTML and other to show GIF. You need to add one more column to your table in order identify if the BLOB is GIF or HTML.
In the Format Trigger of each of these two fields, inspect the value of flag column and hide one field if the datatype is not its type.
For instance, if flag field is 0 then hide Image field and show HTML field. If flag field is 1 then show Image field and hide HTML field.
Regards
Sripathy

Display data from multiple document Libraries in List View Webpart

Hi All,
I want to display data from multiple document libraries into one list view webpart(custom i have created)
I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
but it tells to display only from one document library.
My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
With Regards,
Jaskaran Singh

Hi,
As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
in different libraries.
The links below will provide more details:
Create Visual Web Parts in SharePoint
2010
A demo about displaying list items in visual web part:
http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
About the Check In and Check Out:
How to Check In a document programmatically
SPFile.CheckIn method
and SPFile.CheckOut method
Best regards
Patrick Liang
TechNet Community Support

Inserting data from jsp form to multiple tables !

Hi,
I want to insert data from jsp form to two tables
tables are
(1) Form
formId (PK)
deptName
(2) Data
formId (FK)
sNo
description
itemCode
and the problem is that i want to save information form a jsp form to above two tables and i have only one form.
so how do i insert data from a jsp form to multiple tables.

You already know what your form in the jsp will be and what fields they are. You also already know what your database looks like. Using one form, you should be able to break the data down, and give it certain ids and/or names, so that when the form is submitted, you retrieve the correct values corresponding to a specific field and insert it.
Unless there is something else I am not catching, this seems pretty straight forward.

Split data of 1st shift and 2nd shift

Hi,
I have an SSRS report that displayed the production data. It consist of data from 1st-Shift and 2nd-Shift . My SSRS has a parameter with FromDate and Todate, Time. the default date is today's date. My requirements is to
obtain the data of 1st shift and 2nd shift on the same day and displayed into one report with separate column for 1st shift and 2ns shift. The 1st shift is always start at 6:00AM and end at 2:00PM while the 2nd shift start at 2:00PM and end at 10:00PM
Btw, This report is run every hour. THe objective is to gather how the production perform.
Any help is very much appreciated. Thanks
Sample DDL
Create table #sample
(ID nvarchar(5), DateandTime datetime, qty int)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 00:33:18.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 05:20:57.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-29 23:09:33.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 03:45:08.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 04:53:55.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:00:06.000',1)
Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:15:41.000',1)
Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 06:07:08.000',1)
Declare @timezoneOffset int, @D1 datetime, @D2 datetime, @Stime nvarchar(8), @ETime nvarchar(8),@FromDatetime datetime, @ToDatetime datetime
Set @timezoneOffset=8
Set @D1='2014-05-30'
Set @D2='2014-05-30'
set @Stime='06:00 AM'
set @Etime='02:00 PM'
Set @FromDatetime= @D1 +''+@Stime
Set @ToDatetime= @D2 +''+@Etime
SELECT *
FROM #sample
WHERE DATEADD(HOUR,convert(int,@timezoneOffset), dateandtime) BETWEEN (@Fromdatetime) AND (@ToDatetime)

May I ask you assistance to fix this error.
i wanted this code to have a timezoneoffset.
Also , i would like to ask if this is acceptable in between 6:00 and 16:00, if more than 16:00 (this is 4:00PM) this would be now under shift 2.
case when DATEPART(hour,DateandTime)
between 6 and
16 then 1
else 2 end
as shiftID,
I tried trid this but got an error:
CASE WHEN DATEADD(HOUR,convert(int,@timezoneOffset), DateandTime)
between 6 and
16 then 1
else 2 end
as shiftID2

We want to read data from weigh bridge and display in oracle forms & store

Sir/Madam,
in our organisation we had one requirement. i.e is reading data from weigh bridge using serial port, displying that data in oracle forms and when ever user click save button we store that into my oracle database. we are using oracle 8i and forms 6i and windows OS environment. we don't know reading data from serial port and placing that into form items. please help me as early as possible if there is any property available in d2k regarding this requirement .
thank you,
vishnu

There's no property in Forms that makes you read serial ports, but as far as I know you need to know the API of the machine which you want to read data from (it should come with machine's manual) and then it will be easy to store it in forms item.
Tony

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

This is my first mac product and i want to restore my backed up data from my forma PC to my new mac. how do i do it?

this is my first mac product and i want to restore my backed up data from my forma PC to my new mac. how do i do it?

Migrate your Windows files or system to your Mac

How do you print data from a form?

From the interactive report, there's a built in function to print to variious formats (e.g., PDF, CSV, etc).
As long as the columns do not exceed the width of a page, it's okay.
But what I want to do is when a user clicks on 'edit' from the interactive report and displays the data entry screen, I want to be able to have a 'Print' button to print the data from a form.
Don't want to manually modify the URL to change a parameter to print.
Really appreciate any help I can get on this matter!!!

I want to be able to have a 'Print' button to print the data from a form.Create a Print button in the form page with an <tt>onclick</tt> attribute that calls the method<tt>print()</tt> method:
onclick="window.print();"
Don't want to manually modify the URL to change a parameter to print. Sounds like you want to be able to control which page elements are printed and how they are formatted?
This is quite straightforward using a print media style sheet.
You'll need to identify CSS selectors (usually IDs and classes) from the page HTML for the components and regions that are not to be printed: a web inspector such as that found in Safari, or the Firefox+Firebug combo is useful for this. It's also a good idea to give all of your regions a unique static region ID to assist with this identification. Using this information, you can construct the style sheet to exclude all of the unwanted content using <tt>display: none</tt> rules.
In a simplified example, say you identify that there are 4 regions on the page, and you only want to print region 3. You would add the following style sheet to the page HTML Header:
<style type="text/css" media="print">
#region-1, #region-2, #region-4 {
display: none;
</style>+{message:id=2475831}+ is a solution to a similar problem, and see this article for more enhancements that can be included in your print style sheet.
Really appreciate any help I can get on this matter!!!You'll get effective help more quickly if you include the following information upfront when posting a question. This enables others to understand, replicate and determine the most appropriate fix without wasting time asking all kinds of supplementary questions:
- APEX version
- DB version and edition
- Web server architecture (EPG, OHS or APEX listener)
- Browser(s)/version(s) used
- Theme used
- Templates used
- Region/Report/Process type
And please update your forum profile with a better handle than "846623".

Use an applet in a Jsp to display data from Oracle DB

Hi everyone, I'm very new to java my question is:
Is there a way to display an applet like a table within a Jsp to display data from a Oracle DB? The thing is that I would be able to show this applet only at the click of the submit button in my html form.
Please help me any sample code are welcome
Thank you in advance
Fabry

Hi,
Why can't you use a Java Bean which takes the data from the database. Then call this bean from the JSP page using <jsp:useBean> tag.
Ok,if you dont want a Java Bean and if you want to use an applet in a JSP file, you will have to use <jsp:plugin>tag. Here is an example
<html><head><title> Demo Applet</title></head>
<body bgcolor="rd">
<% if (request.getParameter("SUBMIT") != null) {%>
<jsp:plugin type="applet" code="DemoApplet.java" codebase="." name="Demo" height="400 with="300>
<jsp:fallback> Plug in not supported by your browser</jsp:fallback>
</jsp:plugin>
</body></html>
Hope this will help you.
Rgds,
Ravi Shankar

How do I export the pdf data from multiple forms to an excel spreadsheet?

I have several forms that one of my employees collects data in. I need that data from those forms to go to a spreadsheet for analyzation purposes. I am using Acrobat XI.

No, you can't change the way this built-in command works. You can either process it later on in Excel, or you would need to use a custom-made script and an Action to collect the data in the format you want in Acrobat and then export it.

How do I display data from Multiple Queries in a spreadsheet?

I am running Oracle forms 10g as a kicker to export a report (rdf 10.1.2.0.2) to PDF or Excel Spreadsheet - User's choice.
Doesn't matter if I have desformat = SPREADSHEET, DELIMITEDDATA, or DELIMITED; I still get only the first query displayed when I run in spreadsheet format.
How do I display data from Multiple Queries in a spreadsheet? Is this possible?
Thanks in advance!

Hi adam,
did you search the forum? You will find a lot of threads handling the problem of Excel file access.
In short: you need to use ActiveX (the RGT also uses ActiveX under the hood)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I want to display data from 1st form to 2nd form...

Similar Messages

Maybe you are looking for