I want to email a spreadsheet in landscape

I have creates a spreadsheet in my iphone 4 and when I email it as a PDF it is sent as two pages with the right end column on the second page. I can not see any control to have it sent in landscape form which would solve the issue. Any ideas?

Hi
3GPP is a format that if small can be played on a mobile-phone.
In FinalCut Studio - Compressor - this can be done (astronomical cost and lot's to learn)
Most e-mail accounts that I can use has a 10Mb limit - and making so small movies
I find hard (or even not managed)
I do make a QT.mov file as small as possibly eg 90Mb then I use a service "YouSentIt".
about 320? x 270? and 10fps - are rater small
Here there are free accounts up to 100Mb or may be 200Mb where I download my movie.
In return i get a mail address and log-in that I include in a mail to that one
I want to see the movie.
This is a Great service. Works like a charm.
Yours Bengt W

Similar Messages

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Email a Spreadsheet

    I want to email a spreadsheet directly from Numbers. I could do this on Excel using a PC by just clicking on an icon but can't do the same on my new MAC. I have to save the file, then add it as an attachment to an eMail I have created in Mail but this is long-winded and sometimes I just want to send one 'Tab' of the spreadsheet and not the whole thing.
    Can anyone help?
    Thank you.

    Peter 007 wrote:
    I want to email a spreadsheet directly from Numbers. I could do this on Excel using a PC by just clicking on an icon but can't do the same on my new MAC. I have to save the file, then add it as an attachment to an eMail I have created in Mail but this is long-winded and sometimes I just want to send one 'Tab' of the spreadsheet and not the whole thing.
    As you are no longer on a PC, there is absolutely no reason that this or that task requires the same protocol.
    We must use the protocol which you described and we can't send a single part of a document (if it grabs datas from others areas).
    If you just want to be read by your correspondant, the easiest tip is perhaps:
    select the cells to display
    copy to clipboard
    create a new document containing a single table.
    Paste values only
    Print as PDF
    attach the PDF file.
    Yes, it's different than what you where accustomed to but it's not surprising:
    *Apple thinks different !*
    Yvan KOENIG (from FRANCE jeudi 10 juillet 2008 21:03:52)
    I carefully wrote "different", not better or worse, just different !

  • How do I print a spreadsheet in landscape

    How do you print a spreadsheet in landscape orientation?

    Alternat method:
    Click the page icon at the lower left of the document window:
    That will turn on Print view, and open two new icons,one for Portrait orientation, the other for Landscape orientation, plus the Content scale slider:
    Click the icon for the orientation you want. Use the Content Scale slider to adjust the page coverage of the content if necessary.
    Regards,
    Barry

  • Emailing PAGES spreadsheet one page only - Mountain lion?

    Is this a change in Mountain Lion?  Before, if i wanted to email ONE PAGE of my Pages spreadsheet, I'd just click on the "share" button and it would email only that page.  Now that i try that in Mountain Lion, it'll only email the FIRST page.  How can I email only ONE page of the entire spreadsheet, especially if it is a middle tab, not the first page?
    Thank

    You probably want to post in the Pages forum for Pages help.

  • I created a form, I want the email notices to go to several people. Why is this so difficult? It seems like they have to be a co-author/reader or something? I don't get it

    I created a form, I want the email notices to go to several people. Why is this so difficult? It seems like they have to be a co-author/reader or something? I don't get it

    This is crazy! I paid for this service to make it easier to create forms for a company that has had several acquisitions all over the globe. This was supposed to make it easy to create forms hosted on adobe so no matter what happens on all their servers, we would be safe using this forms service until we can integrate all acquisitions and build a permanent web site on a single server. Now I find out that even this is a major issue sending emails to team members, many I have never met so making them a collaborator or even setting up forwarded emails is not something I wanted to do. This service was advertised as simple and easily send notifications to many people. I am now frustrated and thinking this was a waste of money! Why is it like that?

  • I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
    If that doesn't help, you may have better luck if you ask in the Pages forum:
    Pages
    When you repost, be sure to include full details about your versions so that people know what it is you're working with.
    Regards.

  • How can I change my email address I no longer want that email address?

    how can I change my email address I no longer want that email address?

    I want to change the name of my @me.com email

  • I have Nuance PDF Converter 7.2 and after I scan a document and want to email it, I get an error message that says the scan cannot be attached to an email.

    I want to be clear: I can scan the document with Nuance PDF Converter 7.2, but after the scan, I want to email the scan to someone.
    When I click on the word "email" on the left side of the Nuance screen, I get a failure message. For a couple of years this process worked without a problem. I was told by Nuance Support that the problem was in the email software. Is there something on a drop
    down menu that I can click on the resolve the problem? Thanks.

    The problem could be that your computer doesn't have Thunderbird identified as the default e-mail program, so the first step is:
    Thunderbird: Menu bar: Tools: Options: Advanced Tab: System Integration:
    Press the "Check Now..." button.
    In the resulting "System Integration" window, make sure that "E-Mail" is check-marked, and "Always perform this check when starting Thunderbird" is checked. Then click the "Set as Default" button.
    If you have Windows 8 or 8.1, then there is also another step:<br>
    Windows Control Panel: Programs: Default Programs: Set your default programs.<br>
    Find "Thunderbird" on the left side, and click to select it.<br>
    On the right side, click "Set this program as default".<br>
    Then reboot the computer.<br>
    If the problem still exists, then do a clean install of Thunderbird:
    Certain Thunderbird problems can be solved by performing a ''Clean reinstall''. This means you remove Thunderbird's program files and then reinstall Thunderbird. Please follow these steps:
    #Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
    #After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
    #Delete the Thunderbird installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #** C:\Program Files\Mozilla Thunderbird\
    #** C:\Program Files (x86)\Mozilla Thunderbird\
    #*'''Mac:''' Delete Thunderbird from the Applications folder.
    #*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
    #Now, go ahead and reinstall Thunderbird:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
    <b>WARNING:</b> Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions, emails, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!

  • Apple ID.  My newly updated iPad 2 wants an email for the apple ID.  My apple ID is not an email address.  How can I get past the set-up screen?

    My newly updated iPad 2 wants an email for the apple ID.  My apple ID is not an email address.  How can I get past the set-up screen?
    I can't change my Apple ID.  It would mess all my stuff up.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for pass)

    I want to email a photo through iPhoto but it says I need a password... I entered my password but it says it doesn't match - what password do they want and how do I fix? (Facebook and other social media iPhoto posts work - just email asking for password)

    Your email password.
    iPhoto '11: Email your photos
    Open Mac Mail. From the Mac Mail menu bar click Mail > Preferences then select the General tab.
    Make a selection from the:  Default email reader   pop up menu.

  • My wife wrote her resume. Wants to email it as an attachment only. But whenever it is received it comes as an attachment and as an open document in the body of the email. How do we stop the resume from opening in the body of the email?

    My wife wrote her resume. Wants to email it as an attachment only. But whenever it is received it comes as an attachment and as an open document in the body of the email. How do we stop the resume from opening in the body of the email?

    wyman41 wrote:
    She wrote her resume in Word.
    I don't have any problem attaching just a MS Word file in Mail. My process is pretty simple....with a message open I click the attach icon (paperclip) at the top of the message, then navigate to where the file is located and select it. I make sure I have the cursor at the bottom of the new message below my signature line. FWIW I use MS Word 2011.

  • I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

    I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

    Currently, Adobe Reader for Android does not provide an option to disable auto-save.
    In the Reader home screen (where your files are displayed), you can make a copy of the original PDF document, open the copy (instead of opening the original document), make changes to the copy.  Once you email the copy, you can delete it.
    For more information, please see Help > How To... > Copy, edit, delete, manage.
    Although it is not the most convenient way to accomplish the task, that's the only feasible workaround that is available in Adobe Reader for Android right now.

  • I want to email photos on a different email system, gmail. How can I get the email icon of iphoto to put my photo on a gmail email?

    I want to email photos on a different email system, gmail. How can I get the email icon of iphoto to put my photo on a gmail email?

    If you have Mail setup a a client for your Gmail account set iPhoto to use Mail.  Then select one of Mail's stationary templates for photos and use it. May not be as good as the iPhoto templates but will be fancier than a plain email window.
    Click to view full size
    OT

  • I want to email a short iMovie

    I want to email a 42 sec. iMovie. I published in "tiny" format. When do I see the .mov extension? Do I need to use Quicktime? Quicktime won't open this .rcproject. Should I try to make it a .wmv file? Because more people could open it that way?
    Thank you.

    Hi
    3GPP is a format that if small can be played on a mobile-phone.
    In FinalCut Studio - Compressor - this can be done (astronomical cost and lot's to learn)
    Most e-mail accounts that I can use has a 10Mb limit - and making so small movies
    I find hard (or even not managed)
    I do make a QT.mov file as small as possibly eg 90Mb then I use a service "YouSentIt".
    about 320? x 270? and 10fps - are rater small
    Here there are free accounts up to 100Mb or may be 200Mb where I download my movie.
    In return i get a mail address and log-in that I include in a mail to that one
    I want to see the movie.
    This is a Great service. Works like a charm.
    Yours Bengt W

Maybe you are looking for

  • Safari, MobileMe and Sound

    Well here goes people... First of all, lets talk to the good of the new child on the block - when its working, its nice to have.  No put downs here.  I like it alot! Common Fixes that I have found - 1. Netflix.com can be fixed of its DRM woes by unin

  • Where is the Phonegap template in Dreamweaver CS6

    Hi just wondering if someone can clear this up for me. I have just downloaded the trial of Dreamweaver CS6 and am wondering where the jQuery mobile (phonegap) template has gone? Is there a way i can get it back? Im just curious as the jQuery mobile t

  • Employee Photo Upload through binary data

    Hi all, I know the Provision for Photo upload through OAAD Tcode, I know FM to upload the photos by giving path as input data. my requirement is I have picture in the form of binary data . i want to upload that into PA30. I have return the following

  • DateChooser with external xml

    Im a beginner with Flex. How do I connect an external xml to a DateChooser so every time a date is picked a value/or text (different for different dates) from the xml is passed into a textArea. In this case I want a value of "50" to be passed to the

  • Where to find sample schemas?

    Hi all, I need to install the hr sample database. The SQL book that I am reading uses the hr db for the examples. The book claims that the schemas should be in $OH/demo/schema/human_resources I just did a full install of 10g and can only find hr_code