I want to make a web page using labview.

I want to make a web page using labview. I have the internet tool kit. Where do I start. Till now all I have used labview is for industrial I/O and mmi. I have used various TCP UDP comms for network purposes, but I haven't ever done anything with Web page design.

The internet toolkit has some functions for generating and manipulating HTML, but it isn't really intended as a Web page authoring tool. I personally wouldn't use it for such a purpose, and I've done a good bit of Web programming in various different environments, including LabVIEW.
The true power of the internet toolkit lies in its ability to create LabVIEW VIs to handle CGI requests, the way that perl or PHP might be used in more traditional Web development. In the old days, this was really the only way to provide Web interactivity with LabVIEW on the back end. Here is a document that outlines how to start up the toolkit's Web server and check out the CGI examples that ship with LabVIEW. This is the best jumping-off point for creating your own pages, if you are planning to use the CGI functionality in the internet toolkit. Just examine how the HTML pages and the CGI VIs in the examples work together and begin to try out your own VIs.
Since LabVIEW 6i, LabVIEW has shipped with Remote Panel functionality that allows you to publish any LabVIEW VI in a Web browser without the burden of creating special CGI functionality. Furthermore, users can fully interact with the VI--buttons, graphs, string controls, etc. That's really a better solution if you want to make VIs available via the Web and aren't so much interested in CGI/transactional behavior. Check this out by choosing Tools >> Web Publishing Tool from LabVIEW.
I hope this info gives you some ideas about starting points for Web functionality in LabVIEW. Please follow up if you have more specific questions.
Best Regards,
John

Similar Messages

How to make a Web Page with Labview?

I have a Project: CONTROL A CAMERA OVER INTERNET (with Labview)
i try to make a Web Page but it s very difficult for me.I have Labview 8.6 and Internet Toolkit.
Why can i make a simple Web page?
Why can i control the camera over Internet?
Thanks...

This thread is quite old but there is a new answer that might better suite your needs... So, for those who are looking for the answer, have a look at WebPager plugin for LabVIEW here: https://labicom.net/labdeveloper/WebPager/ . It will make much better job (in most cases) than Remote Panels and Web Services suggested above. The only difficulty I see in your request is a 'camera' word. With WebPager you'll be able to control it from the browser (without any plugins or similar things), but the video image itself will pose problems... Still, it can be tackled.
=========================
Igor Titov, CLA
WebPager - put LabVIEW front panels into the web page
Labicom.net

IPhoto still won't make web pages using the comments field

I am someone who makes use of the comments field in iPhoto. I don't edit the title, because I thought it edited the photo file name (perhaps only in earlier iPhoto versions). Unfortunately, the Apple's tools for making a web page from iPhoto '08 seem to still use the title field only and not the comment field. That means that I have to edit all titles (to blank or a proper title) if I just want to show an annotation on just a few photos in a web page. At least the comments field defaults to blank, so I normally use it, along with the Better HTML plugin to make web pages, http://www.geeksrus.com/software/betterhtmlexport/
Now, the web pages produced by Apple are now as good as and even better than the BHTML templates, and I'd like to use them. But this problem with the comments means I can't quickly convert my old photo albums to something that makes nice web pages using my annotations with the iPhoto tools.
Does anybody know of any solutions to this problem? E.g. a script to copy the comments field to the title field?

I know what you mean. I can't believe that after so many versions of iPhoto that have supported publishing of some sort that such a basic and obvious feature still hasn't been implemented. It can't take that much effort to add. I'd rather have that than the new (and IMHO completely useless) "Events" feature. Speaking of which, does anyone know if there is a way to turn it off? It's annoying the heck outta me. I hate it.

How to make a Web page

I am trying to make a Web page with iWeb 09, but it is really confusing. I presently have a Go Daddy account that forwards my chosen domain name to the obsolete HomePage name I have. When I created the HomePage account, as I recall, it told me the name of the page very clearly, very simple. iWeb does no such thing! I select "Publish" and I get this crazy page that says "Go to your registrar's website (sic). Define web.me.com as the 'www' CNAME (alias) for your domain." That sentence makes no sense! What happened to the simplicity of HomePage. Anyway, I go to Go Daddy and, of course, there is not such thing anywhere obvious. This should be easy. I have a so called Mobile-me account, but it does nothing. What is up with this? Do I even need Go Daddy any more? Any help is very much appreciated.

Any iWeb url is going to be http://web.me.com/username/sitename - so no difference at all.
So when you open iWeb and click on the name of your site you will get the publishing options, so select publish to MobileMe and your site should publish there. Rather than visiting the link, close iWeb and empty your browser cache and then type in your url - http://web.me.com/username/sitename and your site should then come up.
If you want to use your domain name with iWeb you can. Close iWeb and log into your MobileMe account under System Preferences and then go to the Personal Domain name section and enter your domain name in here. Once this is done, close MobileMe and log into your account at GoDaddy.
You do not need to know exactly what CNAME means, but GoDaddy uses CNAME forwarding, so log into your GoDaddy account and go to the DNS setting section. Then set-up a new CNAME, which means forwarding 'www' which is your sub-domain to web.me.com and this should then be set up to forward to your MobileMe published website. Note that when setting this up your alias is your domain name and your host is web.me.com and you are forwarding your domain name (alias) to your host (web.me.com) as this is where your website is published.
If you want to check that your website has actually been published, then you can open System Preferences and click on iDisk and you can then log into your iDisk and go to Web/Sites and check whether there is a folder there with the name of your website on it. If so, then your site has been published.
I am also assuming that as you have posted this in iWeb 09 that you are in fact using iWeb 09?

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

When I want to mail a web-page or link firefox keeps opening new windows and cannot be stopped.

My laptop is a Samsung R730 (quite happy with it). I use Eudora for e-mailing. If I want to mail a web-page or link and click under 'file'to send it, Firefox starts opening new tabs without stopping up to over a hundred. I have to brutally switch off my lap-top, start agaiu. Restart Firefox which wants to open all the old tabs, click it off quickly. After that I can reopen to normal.

You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

How can I add a podcast episode to an existing web page using iWeb?

How can I add an episode to an existing web page using iWeb?
I could probably figure this out but I am afraid if I make changes to the site and re-upload it to the podcast area I will have just doubled it. I see them repeated from time to time.
What is the proper protocal? Thanks
Mac G4 Mac OS X (10.4.3)

Hi apple-owner,
Method 1.
To create this scatter-plot, I selected the whole of Columns A and B. (Shift click on the Column reference tabs).
The plot ignores blank rows, but they are "ready" for new data:
Method 2
If you did not select whole columns, you can extend the "active" rows. Rows 1-5 selected:
Add more data rows and drag the fill handle (small white circle, bottom right) down
Regards,
Ian.

Resizing pixs for web page use

I have resized the photos to use on MS Frontpage but when the thumbnails are clicked on to be enlarged in the web page they are still too large. How do I make photos usable for web page use?

What version of Elements are you using? How are you now going about creating the thumbnails and larger images? What size are you making the large ones? I suspect all you need to do is change the width and height parameters to something smaller.

How to show modal window without popup in a web page using javascript

Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....

Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page...

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.

If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ

Need help to access a web page using midlet to retrieve some informations

Hi everyone i'm trying to access a web page using midlet to retrieve some informations in text format, the web page is [http://daviddurand.info/D228/?villes|http://daviddurand.info/D228/?villes] for my project.
the problem is that i always get error 10049 in socket::open meaning no adresse could be found i tried IP adresse and still the same.
i managed to recreate the same web page to test it on local and the surprise that it works fine but when accessing it online i have this error.
i tried also to get the page i created on a webserver i own to try it saying that there might be security issues but the same error appears again. so help plz
here is my code :
package mobileapplication5;
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class GetMidlet extends MIDlet {
private Display display;
String url = "http://dayaati.com/villes/index.php?villes";
public GetMidlet() {
display = Display.getDisplay(this);
public void startApp() {
try {
getBirthdayFromNameUsingGet(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
public void pauseApp() {   }
public void destroyApp(boolean unconditional) { }
public void getBirthdayFromNameUsingGet(String url) throws IOException {
          HttpConnection httpConn = null;
          InputStream is = null;
          OutputStream os = null;
          try {
httpConn = (HttpConnection)Connector.open(url);
httpConn.setRequestProperty("User-Agent", "Profile/MIDP-2.1 Configuration/CLDC-1.1");
httpConn.setRequestProperty("Content-Language", "en-US" );
httpConn.setRequestProperty("Content-Type", "text/html; charset=iso-8859-1");
httpConn.setRequestProperty( "Connection", "keep-alive" );
httpConn.setRequestProperty("Content-Length","51200");
          getConnectionInformation(httpConn);
          int respCode = httpConn.getResponseCode();
          if (respCode == httpConn.HTTP_OK) {
               StringBuffer sb = new StringBuffer();
               os = httpConn.openOutputStream();
               is = httpConn.openDataInputStream();
               int chr;
               while ((chr = is.read()) != -1)
               sb.append((char) chr);
               // Web Server just returns the birthday in mm/dd/yy format.
               System.out.println(sb.toString());
          else {
               System.out.println("Error in opening HTTP Connection. Error#" + respCode);
          } finally {
               if(is!= null)
               is.close();
               if(os != null)
                    os.close();
          if(httpConn != null)
                    httpConn.close();
void getConnectionInformation(HttpConnection hc) {
System.out.println("Request Method for this connection is " + hc.getRequestMethod());
System.out.println("URL in this connection is " + hc.getURL());
System.out.println("Protocol for this connection is " + hc.getProtocol());
System.out.println("This object is connected to " + hc.getHost() + " host");
System.out.println("HTTP Port in use is " + hc.getPort());
System.out.println("Query parameter in this request are " + hc.getQuery());
**Heeeeeeelp Please**

[http://java.sun.com/javase/6/webnotes/trouble/TSG-VM/html/crashes.html]
SIGSEGV (0xb)Most common cause of that is JNI code used directly or indirectly through a 3rd party library.
64-Bit Server VM (11.2-b01 mixed mode linux-amd64)Conversely that VM gets less traffic than others so you might have hit a bug in it.

A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER. It is a private "incognito" Skype number that I don't want ANYONE to see.

A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER. It is a private "incognito" Skype number that I don't want ANYONE to see.

Yeah, I'm 95% sure that I did that after I closed that Skype, so I was a bit shocked when I saw that screen pop up later :/

How to embed 3D models in web page using JAVA?

Hello
I'm doing a project at University to create a virtual tour of a village. I am creating the buildings in MAYA using polygon planes and cubes and then exporting to VRML.
I plan to embed each individual model into a separate web page. Then when the user clicks on a location in a 2D map they will be taken to the web page containing that building.
However, I can't work out how to embed these 3D models into web pages using JAVA. Can anyone help me with this, please?
Also, I've been told to use JAVA 3D to interact with the project but am unclear as to how JAVA 3D would be used in this project - aqny ideas/suggestions welcome!
M.

If you use Java-plugin, you can embed Java3D in a web page.
Here is the URL(http://www.geovista.psu.edu/products/demos/LorenzAttractor3D/index.html) which used Java3D.
I hope this helps.
Masa

How do I make safari web page go direct to "Open pdf in preview" without having choose it manually

how do I make safari web page go direct to "Open pdf in preview" without having choose it manually

Well crap! Internet explorer goes direct to actual pdf, would'nt you know it, safari wont! I will have to change my pdf order form to include instructions on how to find that toggle thing at the bottom so it wont wig out safari users.
Kind of *****, if people dont know they have to click the open in preview choice, my form wont work.
Thought maybe it was an HTML issue that could be overidden.
Thanks for your answer.
LeeCM

Generating Web Pages using PL/Sql

Friends,
Would eb gr8 if you can provide me with some help files to learn about developing Web pages using Oracle 8i Procedures.
Would really appreaciate your help
null

Ex:
CREATE or REPLACE PROCEDURE hello
IS
BEGIN
htp.p('<html>');
htp.p('<head>');
htp.p('<title>Hello World Test</title>');
htp.p('</head>');
htp.p('<body>');
htp.p('<h1>Hello World Biju</h1>');
htp.p('<p>The time is '
| |to_char(sysdate, 'hh24:mi:ss yyyy-mm-dd')
| |'</p>'
htp.p('</body>');
htp.p('</html>');
end hello;
You can call the above stored procedure by using the following URL: http://machinename:portno/pls/sid/hello
Jack
null

I want to make a web page using labview.

Similar Messages

Maybe you are looking for