I want to move the data from oracle 8.0.5 to oracle 10g

Dear Gurus i want to move my data exist in oracle 8.0.5 to oracle 10g, what is the simplest way to do that without loss of data and time.
thanx and regard

Since you are on 8.0.5, there is no direct path upgrade for you.
You need to first upgrade to 8.1.7.4.1 at least before you can directly migrate to 10gR2.
You can refer Metalink note 316889.1 for this purpose.
Another option would be to simply export the data from 8.0.5 version and import into 10g database.
Simply stated, there is no method which will not take time for this purpose but there would be no data loss (assuming you are not going to change the character set of the database).

Similar Messages

I bought a new iPad for my wife and want to move the data from my iPad to the new one and clear my old one for her.

How do I back up all data on my iPad 2 & restore it to a new iPad 3?

Have a read at my comments on this link - https://discussions.apple.com/message/18857075#18857075
Not too sure what your post heading is saying!!!

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

How do i move the data from Apple ID to iCloud

Hi,
i know that you can't merge Apple ID's and iCloud ID's but what I would like to do is move the data from one to another and by data I mean my contacts and calendars without loosing them.
What I did so far was to signout from my iCloud ID into my mac to log in into the Apple ID so all could be sync to the Apple ID but it didn't as soon as I logged out the data where lost ! (Calendar, Contacts...)
What processs can I use to save those data so i can move to Apple ID only ? any idea or suggestions ?
Thanks

Before you can move data from one account to another, you need to log into both accounts at the same time. Log into one of the accounts as a secondary account in system preferences > mail, contacts and calendars. Contacts can be moved by dragging from one account to another, calendars will need to be exported and re-imported.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal repor

HI Expert
Want to pull the Data from ECC(Functionmodule/view/BAPI) to Crystal report
Need Step by Step Procedure whatl all we come across while Generating report from SAPBI (ECC(Functionmodule/view/BAPI)
to Crystal report what all integration and setting we need to do
Thanks and Regards
AhmedPasha

Hello,
Ingo Hilgefort has documented this step by step in this SCN article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe?QuickLink=index&overridelayout=true
Starting on page 13, you can use the same steps - he selects data from a table join, you select FN instead for function module.
You can also get to it via this link:
http://www.sdn.sap.com/irj/sdn/business-objects-bi-for-sap?rid=/library/uuid/403ddef9-52ca-2d10-9193-9ffd190219fe
Regards,
Tammy

Move all data from one database to other using oracle expdp and impdp tool

I need to move all of the data from one database to another. For that I am using oracle expdp and impdp tool.
I have the full database export dump file. I moved that dump file to my other database.
Now when I try to use impdp tools it gives lots of error regarding path mismatch,user not exists, role not exists.
As my datafile path of source database does not match with the target database path , also the users are not there in target database. I dont want to create all the tablespaces that in my source database as there are 82 tablespaces.Is there any way by which I can move my all data without using remap option for tablespaces or users and grants.

The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax.
The user must have the privielge of EXP_FULL_DATABASE
expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.logGO through below linkfor more details...
http://www.oracle-base.com/articles/10g/OracleDataPump10g.php
Regards
Umi
Edited by: Umi on Feb 4, 2011 2:27 AM

Extract the data from SQL Server and Import into Oracle

Hi,
I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables).
Could you please guide me that how can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file which is generated by source destination nand i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
If you show me the detail approach, it will be really appreciated.
I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even becuase have to schedule the job for this as it will be a daily job.
Thanks,
poratips

Unless you can find an open source ODBC driver for SQL Server that runs on Solaris (and I wouldn't be overly hopeful there) Heterogeneous Services would require that you license something-- a third party ODBC driver, a new Oracle instance, or an Oracle Transparent Gateway.
As I stated below, you could certainly use SQL Server's ETL tool, DTS. Oracle's ETL tools would require additional licensing since you're just on 9.2. You could also write a small application (Java or otherwise) that connected to both databases and transferred the data. If you're particularly enterprising, you could load the SQL Server Type 4 JDBC driver into Oracle's JVM and write a Java stored procedure that connected to the SQL Server database via JDBC, but that's a pretty convoluted approach.
Justin

We switch from an old email address to a new one. How can we move the data from the calendar?

We move to a new email address. How can we move all the data from the calender (iCloud) to the new calender (because the iCloud is now based on a new email address)

Go to appleid.apple.com and sign in with your current Apple ID
Change the Apple ID to the old one and save changes.
Sign in on the device with the same password for your account.
After logging in and signing out of Facetime, Messages, iCloud and itunes and app store, go back to Apple ID.com and change it back to your normal Apple ID.
Go to your email account and reverify your account by clicking on the Verify now link
Now re-login to those services with your normal Apple ID and password.

How to migrate the data from DEC RDB 5.1 to Oracle 11g

Hi,
As part of my project, we need to migrate the data from DEC RDB 5.1 present on Alpha server with VMS 6.1 OS into Oracle 11g. The size of the data in DEC RDB is around 40 GB.
Could you please suggest various ways of getting this done in easy and simpler way?
Thanks in advance.

Hello,
when Oracle bought Rdb from Digital Equipment Corporation (DEC) in 1994, the name of the product changed from DEC Rdb to Oracle Rdb. Meanwhile the actual version of Rdb is 7.2, so you are on a VERY old version. And that excludes the suggestions from the mentioned note to use a database link from Oracle RDBMS to Rdb, that is simply not possible with that old version of Rdb.
But Rdb 5.1 knew already the Rdb Management Utility (RMU) - I just checked that with Rdb 4.1 which is even older.
There are two commands that are helpful for your task.
RMU/EXTRACT - that writes the metadata into a file. That output helps you to build a script to create all the objects in your target database.
RMU/UNLOAD - that writes the data of each table into a formatted file (one file per table). That output can be used by the SQL*Loader to load your data into the target database.
You can read all details about these commands in the online help on your Alpha. At first, issue the HELP command and look in the output list whether it lists a command RMU or RMU51. Then run that command:
$ help rmu /extract
and
$ help rmu /unload
Replace rmu by rmu51 if the help command shows you that rmu51 exists but not rmu.
There is one caveat. Do you use blobs in your Rdb database? If you don't know that, create an the output with RMU/EXTRACT and search the output file for the string LIST OF BYTE VARYING. If there are none then you have no blobs. If you have some you need to take more care of them, they can't be unloaded into a formatted file, that must happen programmatical. If you have such fields then let me know, then I'll tell you how to get them out of your Rdb database.
Best regards
Wolfgang
P.S.: For Rdb related questions it is better to ask in our Communities at https://communities.oracle.com/portal/server.pt/community/rdb_product_family_on_openvms . That forum is watched by Rdb Support and Development.

How to read the data from XML file and insert into oracle DB

Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.

Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well.

I need to move the data from several cells in an excel spreadsheet to another computer's excel spreadsheet.

I have a data aquisition program on computer #1(not labview) that writes to an excel spread sheet and I would like to have a row of data transfered to another excel spreadsheet running labview(computer #2)on the same network. I would like to make this transfer of data either over the network or some other method to link these two computers (they are two feet apart). I'm not sure that datasocket would help , as it seems that the data to be moved must be written for datasocket in labview. My other alternative is to write drivers for the device that provides the data for computer #1. This is a new one for me as the user doesn't want to give up the non-labview program on #1.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel.vi ‏83 KB

I would write a LabVIEW VI to read the Excel file(s) on computer n°1 and publish the data in a shared variable over the network.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

The CFINPUT TYPE=DATEFIELD does not want to accept the date from the database

I got a weird problem which I guess can be just a way to
explain to the server how to interpret the value. I am using
ColdFusion 8 with SQL 2005 Express. In my table, the field is a
DATETIME field and shows the date with time (eg. 2007-07-23
00:00:00).
In my form, when I am adding using the DATEFIELD as the type
for CFINPUT, it records the date correctly. But when I use the
EDIT.cfm form and try to put the value from the database into the
DATEFIELD CFINPUT, the server generate an error. Here is the error:
2007-07-23 00:00:00/0 is an invalid date or time string.
Of course, I tried many things but mostly I tried to force
the format of the date with DATEFORMAT(qGetNewsInfos.dtIssued,
'mm/dd/yyyy') and many more format but without success.
Is anybody know the trick how to use a date into a
<CFINPUT TYPE=DATEFIELD>?

I tried the method like this and still got the same problem:
<cfinput type="datefield" value="#DateFormat(now(),
'mm/dd/yyyy')#">
The system return this error:
08/13/2007 is an invalid date or time string.
I can use this method to record the date of parution of the
News but cannot use it to put a vlue in the CFINPUT? This is not
making any senses!

I just installed firefox and want to sync the data from my existing browser of my cellphone i.e maxthon browser please guide me to do so?

want to sync data i.e email ,bookmarks,passwords etc from existing browser of cellphone to firefox.

[[Import Bookmarks and personal data from another browser]] might be of help.

I want to move the data from oracle 8.0.5 to oracle 10g

Similar Messages

Maybe you are looking for