I want to print the front panel without all the header stuff while the vi is running
I want to print the vi front panel without all the header information that Labview puts at the top. I want to do all this while the vi is running by pushing a button.
One option is to use the the 'Print VI to Printer' method. Beware that invoking this method repeatedly with complex front panels has caused me graphics problems in my VI's display that persist until the development environment or the built .exe app is exited and re-entered.
See: http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=5065000000080000005F5A0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=spaz+print&USEARCHCONTEXT_QUESTION_S=0
NI has confirmed this to be a bug in 6.0x and 6.1 and has indicated that it will be fixed in the next version.
I was forced to fall back on the Append Front Panel Image to Report.vi in the report toolkit. Which does not produce printed graphs of as high as quality as the Print VI to
printer method.
Similar Messages
-
RE: Print a front panel in a file
Use a pdf printer driver and use this along with the print on completion
setting for the VI that you want to print to file.
This is great for reports.
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Cesar
> Sent: 03 December 2001 12:03
> To: [email protected]
> Subject: Print a front panel in a file
>
>
> I would like to know if there is any function or other way to print a
> front panel in a file (a picture file or a print file) in execution
> mode.
>
> thanks
>I'm not aware of a single vi that can do this. The way I've done this is to use combination of vi's described under Help in "report generation vis and function" located under "vi and function reference."
-
I would like to know if there is any function or other way to print a front panel in a file (a picture file or a print file) in execution mode.
thanksYou can use the Get Panel Image method. Place an Invoke node in your diagram, select VI as Vi Server Class and choose Get Panel Image as the method invoked.
You can also choose if you want to copy the visible area only or the entire panel.
Hope this helps.
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
How do i print out a menu list; I want to print the titles in my iTunes folder
I want to print the titles in my iTunes folder, can you say how to do it?
Grab only takes a screen grab.
Copy and paste won't keep the albums together.
iTunes album list is too many pages.
ThanksI have found an answer in the finder and dock section which has allowed me to copy and paste into Word or Excel. It has not copied the format of the window, but with some work will let me print the lists:-
Print a list of files and folders
184 Views 2 Replies Latest reply: May 28, 2012 10:54 AM by BDAqua
Level 1 (0 points) jdrescher
jdrescher May 28, 2012 9:18 AM
Dose anyone know an easy way of listing files and folders from a disk? I need an inventory of the names on some ZIP disks.
Level 10 (171,925 points) Niel
Re: Print a list of files and folders May 28, 2012 10:15 AM (in response to jdrescher)
Find and open the Script Editor or AppleScript Editor in the Applications folder and run the following:
do shell script "ls -R " & quoted form of POSIX path of (choose folder)
Copy and paste the resulting text. (66765)
BDAqua
Re: Print a list of files and folders May 28, 2012 10:54 AM (in response to jdrescher)
You can also get TextWrangler...
Drag any Folder, even a Whole drive to a new text window & get a list like this... -
I want to print the LOGO on the report output
Hi ,
i want to print the LOGO on the report output. How can tyhis possible ?using "SMWO" to upload LOGO image.
add a customer "customer control" named P1 using "SE51"
the following program for your reference:
=============================================
REPORT ytest17.
DATA ok_code TYPE sy-ucomm,
save_code TYPE sy-ucomm.
DATA container TYPE REF TO cl_gui_custom_container.
DATA picture TYPE REF TO cl_gui_picture.
DATA init.
CALL SCREEN 100.
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
save_code = ok_code.
CLEAR ok_code.
CASE save_code.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "user_command_0100 INPUT
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
IF init IS INITIAL.
DATA url(255).
CLEAR url.
CREATE OBJECT container
EXPORTING container_name = 'P1'.
CREATE OBJECT picture
EXPORTING parent = container
EXCEPTIONS error = 1.
IF sy-subrc NE 0.
ENDIF.
PERFORM load_pic_db CHANGING url.
CALL METHOD picture->load_picture_from_url
EXPORTING
url = url.
IF sy-subrc NE 0.
ENDIF .
init = 'X'.
ENDIF.
ENDMODULE. "status_0100 OUTPUT
*& Form
text
FORM load_pic_db changing p_url.
data query_table like w3query occurs 1 with header line.
data html_table like w3html occurs 1.
data return_code like w3param-ret_code.
data connect_type like w3param-cont_type.
data connect_length like w3param-cont_len.
data pic_data like w3mime occurs 0.
data pic_size type i.
refresh query_table.
query_table-name = '_object_id'.
query_table-value = 'TESTPIC'.
append query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
changing
return_code = return_code
content_type = connect_type
content_length = connect_length
EXCEPTIONS
OBJECT_NOT_FOUND = 1
PARAMETER_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
pic_size = connect_length.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
SIZE = pic_size
DATE =
TIME =
DESCRIPTION =
LIFETIME = cndp_lifetime_transaction
CACHEABLE =
SEND_DATA_AS_STRING =
FIELDS_FROM_APP =
tables
data = pic_Data
FIELDS =
PROPERTIES =
COLUMNS_TO_STRETCH =
changing
url = url
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_PUT_TABLE = 2
DP_ERROR_GENERAL = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*& Module CANCEL INPUT
text
module CANCEL input.
LEAVE PROGRAM.
endmodule. " CANCEL INPUT
============================================= -
I don't want to print the last page of a smartform when there is no content
I don't want to print the last page of a smartform when there is no content. Kindly help
If the last page is printed, there are two possibilities
-1- The MAIN WINDOW is only in this page
-2- The page is explicitly printed from another page (new-page)
-3- There is date but its only space or skip line.
So in your form
-1- Redefine the logic of your form
-2- Check that, there are some data to be printed before calling the NEW-PAGE
-3- Do skip or write space lines before printing an actual line and not after
Regards -
Every time I receive an email in my apple mail app that has an iCal invite attached I cannot print the email out. I'm not trying to open the iCal, or print it. Simply wanting to print the conversation. Please help!
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
I don't want to buy a calender I want to print the one I made on iPhoto with my own picture pages. There is also a problem with the cover page. Ihe title will not present the same in the source column as is on the larger picture, and It won't let me change it.
VirginiaDo NOT buy the book
Preview the calendar exactly the same way you preview the book
Preview the calendar the same as a book -
or with really minor edits
Preview the calendar using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF and print it
LN -
Print front panel without header
Hi all... i'm using labVIEW 7.1
i tried to print a page of front panel but when the page out i found there got my file path, date time, and even my VI icon...
I had tried using "Easy Print VI Panel or Documentation " and "Print Panel To Printer Method" but the result still same...
So, got any method to avoid this problem?
with regard
JaxxGo to "File...VI properties...Print Option" and uncheck the first option. See if this helps.
LabVIEW Champion . Do more with less code and in less time . -
Is there possibility to use the front panel without installing Labview?
Hallo,
i have two small questions:
1- Is it possible to use the front panel of a labview software without needing to install Labview itself? i mean something similar to the "power point viewer" which can view the Power Point files without installing the microsoft office.
2- In an intensity Graph, how can one change the color?
thanks.
Solved!
Go to Solution.Hi,
Regarding your questions
1)You need to have Labview and Application builder installed on your machine. If you have that you can make an stand alone application (EXE) and then you can deploy it on systems that does not have LabView and can view it, However you will not be able to see the block diagram.
Here is a link that explains how to do so
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/exe_ex/
2) You can either do it by using propery node or marker method. The following link explains it
http://digital.ni.com/public.nsf/allkb/1ADFF221E27F5B5886256E6F007C7B58?OpenDocument
Hope it helps.
Regards,
Fawad
Fawad Nisar
Applications Engineer
National Instruments UK & Ireland -
Manually controlling the front panel without a keyboard
Hi all,
In my application I constantly switch the keyboard and the mouse between two computers (using a KVM switch), but would like to continuously be able to control a numeric control on the front panel of one of the computers (running LabView 6.1). Even if I wasn't switching, the use of the keyboard is awkward, since the control needs to be fairly effortless, quick and smooth. After searching a bit for a knob/wheel/dial type of controller, I was only able to find the new PowerMate (Griffin Technology) as a reasonable candidate, and have yet to purchase and try to integrate it. I'm also not sure how it will work with LabView.
Am I overlooking a simple solution?
Anyone have some experience with the Pow
erMate?
many thanks, ShyAnother option: Create a simple TCP/IP application in VB or LabVIEW to
control the control.
That is,
Monitor for incoming TCP/IP data in the VI with the control.
If on your other computer you wish to make a change, just use your
little application to do it, and send the value to the main app.
Very cheap to do =)
Another option 2:
Grab the available Parallel Port digital interface design specifics for
labview. Create yourself a simple binary switch interface. Assign 4
bits for up and 4 bits for down.
That is,
sw1 = -10
sw2 = -1
sw3 = +1
sw4 = +10
Read in the digital input from the parallel port and increment your
control accordingly. You can obviously assign any values you want to
the digital inputs.
Hope this helps guide you a little bit!
Sincerel
y,
Jason G Richmond
Project Engineer II and LVAAD Instructor
VI Engineering
[email protected] (domain should be vieng.com (no A's))
sshoham wrote:
> Hi all,
>
> In my application I constantly switch the keyboard and the mouse
> between two computers (using a KVM switch), but would like to
> continuously be able to control a numeric control on the front panel
> of one of the computers (running LabView 6.1). Even if I wasn't
> switching, the use of the keyboard is awkward, since the control needs
> to be fairly effortless, quick and smooth. After searching a bit for a
> knob/wheel/dial type of controller, I was only able to find the new
> PowerMate (Griffin Technology) as a reasonable candidate, and have yet
> to purchase and try to integrate it. I'm also not sure how it will
> work with LabView.
> Am I overlooking a simple solution?
> Anyone have some experience with the PowerMate?
>
> many thanks, Shy -
Photosmart Premium C309a. I want to print on CD/DVD without using the templates provided
In the templates included in the drivers/software, there are only a few variations to use. I want to design the print-layout myself, (a blank CD/DVD), but have so far not found any way to do that. Does anyone know how to do it
Hi excolprof,
We only support disc printing with the supplied Easy Photo Print and My Image Garden software. You are welcome to try using third party programs, but as they are not supported, the only steps I can recommend would be to make sure that hte paper size is set to CD Disc within the software.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Want to print the whole month with or without overtime for each employee
Hi,
I have Oracle forms/reports10g R2, Below query returns employee overtime correctly but I want to add the whole month with it in simple words if one employee have overtime for five days in a month I want the query to return the whole month including five overtime days for each employee and let say if we have ten employees query return whole month for each employee either he have or overtime or not how can I implement this in report it becomes agony for me, anyone please suggest a solution.
Thanks and regards, Khawar.
---Query---
select o.ot_date , o.start_dt_time as start_time, o.end_dt_time as end_time, o.ot_details, et.holiday, et.staff_id, e.staff_name, e.desig
from overtime o, emp_ot et, employee e
where o.complain_no = et.complain_no
and o.inc_type_code = et.inc_type_code
and et.staff_id = e.staff_id
order by 1, 2, 3, e.staff_idHi Michael,
Thanks for reply, I think I didn't explain as I should, I want to print Overtime report for each employee let say employee A123 did overtime for five days in DEC than what I want is to print report for employee A123 for the whole month means when I print report blank cell should come where A123 don't have data (I mean other 25/26 days).
The structure of tables are as
SQL> desc overtime
Name Null? Type
COMPLAIN_NO NOT NULL NUMBER(5)
OT_DATE NOT NULL DATE
START_DT_TIME NOT NULL DATE
INC_REF_NO NUMBER(5)
END_DT_TIME NOT NULL DATE
INC_TYPE_CODE NOT NULL VARCHAR2(10)
DISTRICT_CODE VARCHAR2(6)
BUSBAR_VOL VARCHAR2(5)
OT_DETAILS VARCHAR2(2000)
SQL> desc EMP_OT
Name Null? Type
STAFF_ID NOT NULL VARCHAR2(8)
COMPLAIN_NO NOT NULL NUMBER(5)
INC_TYPE_CODE NOT NULL VARCHAR2(10)
HOLIDAY NUMBER
Each employee associated with primary key i.e COMPLAIN_NO and INC_TYPE_CODE
in each OVERTIME table record we may have more than one employee in EMP_OT table.
above detail may clear my query.
Thanks and Regards,
Khawar. -
Print VI front panel to file does not work after building executable.
I am using a property and invoke node to print the front panel of my VI to an HTML file. It works fine in the development mode. After Building the application, this subvi will no longer
print the front panel. Is there some special files that included in the build??You can use the Report Generation VIs to generate the HTML report. Specifically, you could use Append Front Panel Image to Report.vi and Save Report to File.vi to save the image of the panel to an HTML report.
Check out the examples in examples\reports to get a better idea how to use these VIs if you've never used them before.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
I'm using the code shown in the sample VI discussed here: http://digital.ni.com/public.nsf/allkb/353A696A3F393D9B86256E8B007A2912
to close all open VIs except my top level VI. My top level VI is actually a separate executable and the sub-VIs are their own executables. All reside under the same project. It works very well if I'm running in LabView but will not work when I build them. I added all the sub-VIs to the Always Include box in my top level VIs properties which did nothing. I also tried adding them to the Startup VIs box. This allowed me to close them all programmatically from the top level VI but it also open all the VIs at once (which was expected and not desired). I think the problem is the executables are not able to see outside their own memory space so the top-level VI never finds any other open front panels to close. Is this correct? Is there another way to go about doing this?
Thanks!Where do I begin…..
I’m using a “server” to control 4 “client” PCs. My server opens references to 4 VIs on each client then executes them sequentially. So on a normal day, the server will run everything itself and I will have no contact with the clients. But on a several occasions, I’ve needed the ability to walk up to one of the clients and run just one of the 4 VIs.
We are updating from LabView 6.1 to 8.5 and we want to run executables rather than VIs for various reasons. I have a new VI running on the client PCs who’s only function is to initialize the shared variables and open/close the VIs. I initially thought of making the remaining 4 VIs sub-VIs but I will loose the ability to run them individually. I think I would also have to rewrite the VI running on the server since the 4 references it originally opened do not exist. I don’t think you can open a reference to a sub-VI on another PC. Can you???
As you can see, this is a huge mess. I’m still pretty new with LabView so any help you can provide would be great.
Maybe you are looking for
-
Black only error message when all inks are full
My printer ran out of a color some time ago and popped up the black only message box. I have since replaced all of the colored inks and it still gives me the black only message when I go to print and says I need to replace magenta. I just replaced it
-
Text Functions Not Appearing in PDF (Financial Reports)
In the header of Financial Reports we are using common text functions to create the report titles with POVAlias and related functions. These headers correctly appear when printing or web viewing the reports. However, when viewing or printing to PDF -
-
My iphone 4s doesn't recognize my SIM card
I went to trade 4S for 5C and couldn't get credit for it because I couldn't wipe phone. Can I get a functioning SIM card to trade in otherwise good phone? It looks brand new and is a year old.
-
Document currency is blank in 2nd ODS after loaded from 1st ODS!
1st ODS contains the document currency field and each record does have the value for it. In the update rule from 1st ODS to 2nd ODS, there is only two fields populated, one is the document currency (the update type is Overwrite for this unit and the
-
I am running Photoshop elements 5.0 on Windows Vista. After downloading some pics that froze the download in the middle, I now get an error message when I try to open the organizer. Message is as follows: Microsoft Visual C++ Runtime Library The appl