Print VI front panel to file does not work after building executable.

I am using a property and invoke node to print the front panel of my VI to an HTML file.  It works fine in the development mode. After Building the application, this subvi will no longer
print the front panel.  Is there some special files that included in the build??

You can use the Report Generation VIs to generate the HTML report.  Specifically, you could use Append Front Panel Image to Report.vi and Save Report to File.vi to save the image of the panel to an HTML report.
Check out the examples in examples\reports to get a better idea how to use these VIs if you've never used them before.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

  • Program does not work after build

    Hi,
    I have built a program today that builds fine (no errors or warnings) but it fails when running the exe.  I am using drivers for a spectrum analyzer (Rohde & Schwarz FSG) and when one of these drivers is called, it returns an error.  Other drivers are run before this particular vi.  Anyone have any idea how to troubleshoot this?  I'm going to try and build the vi on its own and see if it works.  In the mean time, if anyone has any suggestions, please let me know.
    UPDATE: I built the file on its own and it still does not work.  Again, when I run it in developer mode, it works fine.
    VISA Write in rsspecan_core_write.vi->rsspecan_core_attribute_wr​ite_int.vi:3->subrsspecan_core_attribute_express.v​i:2->rsspecan Configure Averaging Type.vi:Instance:Instance           1 41Saved   rsspecan Configure Averaging Type .vi:1->rsspecan Configure Averaging Type.vi
    Thanks.

    I've decided to post the vi since it is free to download.  If anyone has an FSG and wants to build this file and see if they can run it, please do so.
    Attachments:
    rsspecan Configure Averaging Type.vi ‏31 KB

  • MS office report function does not work after building the appication

    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    I use office 2000  and Windows XP

    jmq wrote:
    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    What error message if any did you get? It could be a couple things:
    1. Did you include the Report Toolkit's dynamic vis in the app's build process?
    Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
    2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
    Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • Access DB (& .ldb file) does not close after crystal reports

    Post Author: mgold
    CA Forum: Crystal Reports
    Access DB (& .ldb file) does not close after crystal reports
    Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
    When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
    Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
    The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
    A few key pieces of information:
    - The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
    - It worked on this client's network until sometime in the last few weeks.
    - One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
    - It works fine running the application from a Windows Vista PC with a user who is a domain admin.
    - The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
    Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
    - The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
    - I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
    Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
    Thanks!
    - Mark

    Crystal doesn't support tables in HTML interpretation. 
    You can probably work your way around this by doing Replace() calls on the relevant tags.
    See:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
    The supported HTML tags are:
    " html
    " body
    " div (causes a paragraph break)
    " tr (causes only a paragraph break; does not
    preserve column structure of a table)
    " span
    " font
    " p (causes a paragraph break)
    " br (causes a paragraph break)
    " h1 (causes a paragraph break, makes the font bold
    & twice default size)
    " h2 (causes a paragraph break, makes the font bold
    & 1.5 times default size)
    " h3 (causes a paragraph break, makes the font bold
    & 9/8 default size)
    " h4 (causes a paragraph break, makes the font bold)
    " h5 (causes a paragraph break, makes the font bold
    & 5/6 default size)
    " h6 (causes a paragraph break, makes the font bold
    & 5/8 default size)
    " center
    " big (increases font size by 2 points)
    " small (decreases font size by 2 points if it's 8
    points or larger)
    " b
    " i
    " s
    " strike
    " u
    The supported HTML attributes are:
    " align
    " face
    " size
    " color
    " style
    " font-family
    " font-size
    " font-style
    " font-weight

  • Printing only odd/even numbered pages does not work

    I've got following problem: Printing only odd/even numbered pages does not work. Not in Preview, nor Adobe Reader. I Don't know why. i'm using a hp Color LaserJet 2550L. I just worked fine, but I cannot remember the time this failing first occured. I really hope the problem will be solved quick and easy.
    Thanks so far
    Bastian.

    Mine does not work either. I have trashed prefs, rewrote permissions, ran Disk Utility from a separate HD, etc. and I cannot get this feature to work.
    I got 45 odd pages to print last night and now it won't print odd or even pages. I am reduced to printing every backside page one at a time. If I would have known about this problem before I could have saved myself an hour and just printed them all on single sided sheets. I tried to save paper and now I'm screwed (timewise)......
    Any other suggestions would be greatly appreciated.
    Thank You,
    Dave Buckley

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • Save Panel Image / Screen Image does not work as an Executable

    The Save Panel Image / Screen Image does not work as an Executable.  It looks like there is a conflict with the Path, since the Screen_Image.exe is launched as Screen_Image.vi.  I've tried this function both ways with the path name change Screen_Image.exe AND Screen_Image.vi.

    Any chance you might be able to post some code illustrating what you are talking about?
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • The download of icloud control  panel v2.0 does not work. I have no box to check for calendar and contaks. Whats wrong?

    The download of icloud control panel v2.0 does not work. I habe no box to check for calendar and contacts. Whats wrong?
    Thanks Chris

    Hi, I came across the same problem and was not able to open any iCloud folders on Outlook, and iCloud was continusly asking to repair the iCloud Control Panel. Got the issue fixed by following the steps on the link http://somanytips.com/fix-icloud-error-repair-the-icloud-control-panel-to-use-ic loud-with-outlook/

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Open Hub does not work after upgrade

    We just upgraded our BW production system from 3.0b into 3.5 and we are running support package level 09. Now we are facing serious problems with Open Hub.
    After upgrade Open Hub delivering data from infocube into
    csv-files does not work. When running the InfoSpoke it
    will deliver 0 data records even though it should bring considerable amount of data.
    There is no error message or short dump, it just do not deliver any data. InfoCube has data in place and it is available for reportoing. Extraction is made in FULL-mode and there is no transformations. Funny thing is that extraction from ODS or InfoObject works perfectly fine.
    Has anyone idea how to solve this?
    Thanks in advance,
    JL

    We ran into the same issue as Jari Laine today.
    We just upgraded our BW sandbox environment from 3.0b into 3.5. We are running support package level 13, though. Now we are facing serious problems with Open Hub.
    After the upgrade, our Open Hub which delivers data from an info cube into CSV-files does not work any more.
    When running the Info Spoke it will deliver 0 data records even though it should bring a considerable amount of data.
    There is no error message or short dump, it just does not deliver any data. The Info Cube has data in place and it is available for reporting.
    The Extraction is made in FULL-mode and there are no transformations.
    Has anyone an idea how to solve this?
    Thanks in advance,
    Marc

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Satellite A110-228 LAN does not work after hibernate

    Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
    It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
    After a reboot, the network functions as usual (gets a IP address from the DHCP server)
    Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
    The wireless network will be restored after a hibernate.
    It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
    Any suggestions?
    Wilm Boerhout

    Hi guys
    In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
    I think the options are disabled by default.
    Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
    Please check this how to enable WOL (first time use):
    1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
    2. Enable Wake-up on LAN
    3. Click [Apply]. System will request to reboot.
    4. After the reboot go to [Start] -> [Control Panel] -> select [System]
    5. On system properties dialog box select [Hardware] tab -> click [Device manager]
    6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
    7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
    8. Press [OK] to close the dialog box.

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

Maybe you are looking for