I want to put a number in a cell and tell it to times by 2 and get the result as a total further along. Sorry couldn't find the answer in any tutorial.
I want to put a number in a cell and tell it to times by 2 to give the result i another cell? Sorry couldn't find the answer in any tutorial.
Hi Caakie,
Sounds like tou need some basic information.
The best advice I can give someone new to Numbers (and to spreadsheets in general) is to download and read at least the first four chapters of the Numbers '09 User Guide. You'll find a download link in the Help menu in Numbers '09.
When you want to start using more complicated formulas, you'll also need the iWork Formulas and Functions User Guide, available from the same menu.
Regarding your question: "Can you just give me the string for B which is just add and C which is *2."
What is to be added in "B"? What is to be multiplied by 2 in "C"?
=2+3 will return the result 5.
=A+B will return the sum of the numbers in column A and column B in the same row as the cell containing the formula. If either A or B contains a non-numerical value, the formula will return an error message.
=3*2 will return the result 6.
=A*B will return the product of the numbers in column A and column B in the same row as the cell containing the formula. If either A or B contains a non-numerical value, the formula will return an error message.
Regards,
Barry
Similar Messages
-
I WANT TO PUT SEVERAL BULLETS IN ONE CELL USING NUMBERS. ANYONE KNOW HOW?
I WANT TO PUT SEVERAL BULLETS IN ONE CELL USING NUMBERS. ANYONE KNOW HOW?
if you want to put some variable number of bullets you can use the function :
=REPT("•", A1) -
I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD. How do I do this? I have a PC with Windows.
You say the music is not on the external HD, the music list (iTunes?) is empty, and it is not on the iPOd. Then where is the music you want to move to the external HD?
You can redownlaod iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.
Are you sure it's a 3GS? What is the model number?
-
After I receive my serial number, I couldn't find the Acrobat 11 disc I purchased. Is there still a way to download the software online somewhere?
Hey,
You might try downloading Acrobat XI from the link mentioned below:
Other downloads
Regards,
Anubha -
My Itunes quit functioning so I removed it and when I tried to reload i keep getting a runtime error. Program: C:\ProgramFiles(x86)\itunes\itunes.exe. R6034. Any suggestions?
You will have to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to correct.
-
I had my iPod set up and everything then when I hooked or up to my computer iTunes told me that my iPod could not be read and that I needed to restore it, so I did that and after when i plugged it into iTunes and selected the songs that I wanted to put on my iPod and clicked sync it started to sync but right when it gets to the end it goes blank and says choose your songs/playlists once again and I have to start all over. What am I doing wrong?? Help me , I neded my music!!
Try here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, ...
It contains a link for Vista/7 -
I have an iphone 4s ios 7.0.2. Before updating to the latest ios i had songs in my iphone. after updating also it was there, but when i wanted to put more songs through itunes in my iphone , i synced with itunes first with my iphone. Then i pressed sync all songs and then itunes said that all songs had been synced. But in my iphone it showed me that there is no songs at all and i have to download it from itunes store. The songs which i had also went from my iphone. I dont know what happened. I updated my itunes to the latest one 11.1.1. But still no change . Can anyone tell me what is the problem. What to do?
Hello babichanjacob
Change how it syncs by enabling Manually manage music and videos, then you can drag and drop the music that you want on your iPhone. Revert it back to test to see if that resolves the issue.
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have my new HD in a USB enclosure connected to my MacBook Pro and I want to put a fresh copy of Mountain Lion on it. I'm told that I need to boot from the Installation Disk to start. But I do not have an install DVD as I got ML as a download from the App Store. Can I download ML from the App Store again, but this time directly to my new HD?
Create a data recovery/undelete external boot drive
You can also use Carbon Copy Cloner to clone your present setup to it and boot from it.
Most commonly used backup methods
However, SOME external enclosures are not bootable, you will soon find out. -
How are you supposed to get help from Apple if you don't know what your serial number is? They say to input the serial number of the "product" that you are asking about. Since my problem is how to deauthorize/authorize computers, and they are saying I have more than 5 (which I have never owned more than 5 computers in my life), I can't imagine what serial number they mean. Does it mean your desktop computer? If so, which one? Do they mean your device? LIke your iPhone, iPod or whatever? Do they mean the software ON one of your computers and/or devices? If so, which program, and on which computer/device?
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. I only know of 2 computers that have iTunes on them, so how can there be 5? We also have 2 iPhones and 2 iPods in this family, but one of the iPhones has his own apple id. He may have been using mine, since his computer died. I read that those don't count as "computers" to the 5. Do they, then?
Help! I can't contact apple because I have no idea what they mean about serial number. I doubt they would help me anyway. In order to get the serial number off my desktop computer (that has iTunes on it already), I will have to move furniture, so I don't want to if that's not it. Is there some way to find the serial number in the software, either on my desktop or my iPhone?sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
I received a 'bogus' email saying I had a virus and to click to scan my entire OS. I did not click - I trashed the email.
I wanted to empty my cache but couldn't find it (OS 8.10.8.5) -- In the main menu, under Safari, the only thing I found was to select preferences, then privacy -- where a window showed an option of removing some or all cookies and other website data.
Is that what I should do or is there a cache somewhere on the laptop?
ThanksYou were scammed. There's nothing wrong with your computer. You don't need to empty the cache.
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic. If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one. -
How can i send my picture from PC to iphone 5?
FaceTime is not available on devices sold in Dubai, their country doesn't allow it. Even though you may now be in a different country you won't be able to install it, including via iOS updates - it's blocked by the serial number.
To sync photos, connect and select your phone on the left-hand sidebar of your computer's iTunes (if the sidebar isn't showing then control-S should get it to show), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the phone. There is a bit more info on this page. You will need to sync all the photos that you want on the phone together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the phone, instead they are deleted by not including them in the next photo sync. -
Is it possible to put the results from a query in a variable to use in the bean class?
Hello, I'm using JDeveloper 12.1.2.0.0
I would like to keep the result of my queries (the method i created in the AppModule) in a RichTable or other type of variable so i can have the results stored and i don't have to do unnecessary queries after. I don't think the query is the problem but keeping the results.
I've tried to do that by using this:
public String testVFactSales(String conditions) {
PreparedStatement query = getDBTransaction().createPreparedStatement("" + "select * from v_fact_sales " + conditions, 0);
//ResultSet rs;
ResultSet result;
//RichTable result;
//String result = null;
try {
//query.setString(1, conditions);
// query.execute();
query.execute();
result = query.getGeneratedKeys();
query.close();
System.out.println("Result: " + result.toString());
return result.toString();
} catch (SQLException e) {
e.printStackTrace();
return "";
As you can see, i've already tried some solutions but so far i only get errors (cannot convert or null exception, when i try to put the result in a richtable in my bean class)
Any ideas?
This is very important for me, since it would improve the performance of my project a lot.
Regards,
Frederico.Hey Arunkumar,
I came to this conclusion since i'm using binding variables with my where clauses.
I've measured the time and i get really bad time responses.
This is my main table query, where all the others selections will be filter the search in this table:
SELECT VFactSalesNew.N_SALES,
VFactSalesNew.QUANTITY,
VFactSalesNew.PRICE, ,
VFactSalesNew.FK_STORE,
VFactSalesNew.ID_ANO,
VFactSalesNew.QUARTER
FROM V_FACT_SALES_NEW VFactSalesNew
WHERE
((nvl(:var_dimCoin,'0') ='0' OR FK_COIN IN (select * from THE(select cast( in_list(:var_dimCoin) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimProduct,'0') ='0' OR FK_PRODUCT IN (select * from THE(select cast( in_list(:var_dimProduct) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimCustomer,'0') ='0' OR FK_CUSTOMER IN (select * from THE(select cast( in_list(:var_dimCustomer) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimStore,'0') ='0' OR FK_STORE IN (select * from THE(select cast( in_list(:var_dimStore) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimSeller,'0') ='0' OR FK_SELLER IN (select * from THE(select cast( in_list(:var_dimSeller) as mytableType ) from dual ) a) )
AND
(nvl(:var_dimProject,'0') ='0' OR FK_PROJECT IN (select * from THE(select cast( in_list(:var_dimProject) as mytableType ) from dual ) a) )
AND
(nvl(:var_ano, '0') ='0' OR ID_ANO IN (select * from THE(select cast( in_list(:var_ano) as mytableType ) from dual ) a) )
AND
(nvl(:var_treemap,'0') ='0' OR PK_REGION IN (select * from THE(select cast( in_list(:var_treemap) as mytableType ) from dual ) a) ) -
Couldn't find the answer to this in any other forum about the MacProtector Malware. Please HELP!!!
I clicked on a link while reading a story about vegetarian athletes today and the MacProtector malware downloaded to my computer. I DID NOT install the application when the installer opened. I immediately started searching for support on what to do. I exited the installer and rebooted in safe mode. I found the program in the downloads menu and put it in the trash. I emptied my trash. I have looked through all of the possible places the program could be hiding and I did not see anything. Am I safe? Should I still change my password? Also, will the virus be able to find my credit card information linked to iTunes or any other shopping websites? Should I start using Foxfire permanently instead of safari?
I would appreciate any help- even though I know this has been discussed quite a bit!Hi, here is how to remove it by yourself...
http://goo.gl/J7R6A
Script that I create which, will help you remove it ..... (Let me know using the contact at that site.)
http://goo.gl/rGV62
What is does.
Depending on the version it just creates a bunch of random fake notification and claims your infected. If you keep getting it then most likely you have Allow popups and "Open Safe files" in safari on. The only damage is if you give the criminals that created it your Credit Card.
It is changing so it depend on the version but these two links should help. -
All the songs in my iTunes have the exclamation point. I do not know how to find location of the music...any suggestions?
Ok, your music could be in one of a coupel formats, MP3 or, more likely, Apples AAC format, which has a m4a prefix. Open Finder. Hold Command and press F, this will open a search window in the top of Finder. Type mp3 here, let it search. If it finds your music files, double tap on one and "open Enclosing Folder" That should show you where they are at. If nothing is found, try searching m4a instead. One of the two should show you where your music is.
Maybe you are looking for
-
Need to pass values to Internal table in Web dynpro ABAP
Hi all, I need to pass table values for the below FM in web dynpro. CALL FUNCTION 'ZFMHR_RWF' TABLES PB0006 = How do we declare and use Internal tables in WEBDYnpro. Regards, Vijayakumar S.
-
Network settings keep resetting MTU to 1500
I have recently upgraded to ML on a 2010 MBP I had the usual N-wifi connection problem* - even after 2 full-up installs, but finally solved it by setting the MTU to 1453 on both my router (Linksys) and in the network settings in MacOS But now, for so
-
BAPI Generated Segment is missing 2 fields in WE31...Old Version
The BAPI BAPICHARACTDETAIL generates an idoc segment, it is in 46C, called E2BPCHARACTDETAIL000 for segment type E1BPCHARACTDETAIL. Is there a way to regenerate the BAPI to re-create the segment in WE31? Because the BAPI has two more fields than does
-
Missing Template Handler is missing in action.
After a bit of struggle I found out how to input a missing template handler into our aged 4.5 Unix ColdFusion server. I was able to have it server up the custom 404error.htm file developed by our web department. And this worked, sort of. The problem
-
Hi Group, IN ISU systems ABAP Proxy's are not working: I did the following set up : IN ISU: Created RFC Dest: SAPISU_XI Pointing towards XI Cleint in PI : Created RFC Dest: LCRSAPRFC SAPSLDAPI PI_INTEGRATIONSERVE