I want to send the data on internet using my laptop as a hotspot of wifi ?

Dear Team,
I have created an I/O server & sucessfully made communication with Modbus RTU device.
Now I want to send this data on an internet.
I have a laptop, which i have made hotspot using connectify.
so i wish to transmit the data via wifi hot spot.
How to transmit the data via wifi from laptop ?
Can any one help me out on this...

This is the easy part. Once you connect via the hotspot you can communicate using your standard internet protocols. Is the application accessing you laptop also running code you have written in
LV?
If so there are examples that show how to transfer data via a TCP/IP connection.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

  • I want to send the data in the same format that hypertermi​nal does it

    if i connect the other end of the cable to another computer and i use hyperterminal and then run my VI i receive the message as it was inputed in my labview vi.
    If i send this sami string to another device that it is not my computer i does not respond to it. What could the problem be ?

    Hey Nobuto,
    Your issue is probably a result of termination. When using VISA enabling termination causes the termination character to be stripped off of your read commands. Or, the termination is not being displays. To display the termination right click on the indicator from your read function and select '\' Codes Display.
    However, enabling terminatio does not append it back to your write commands. Try appending \n to the end of what ever you are writing. In addition, when you are using hyperterminal do you ever it Enter. If you do then you are sending a \n.
    I hope this helps.
    JoshuaP

  • How to send the data from jsp page to excel ???

    hi all,
    i want to send the data from my jsp form to excel sheet. any one can help me ??

    Hope this sample code might help :
    StringBuffer data = new StringBuffer();
    OutputStream ostream = response.getOutputStream();
    response.setContentType("application/vnd.ms-excel");
    response.setHeader( "Content-Disposition",
    "attachment; filename=sample.xls" );
    ostream.write(data.toString().getBytes());
    ostream.flush();
    Try it out.
    Swathi

  • Export the data of Essbase using ODI11

    Hi,
    I want to export the data of essbase using odi 11.g ,and store in the oracle database;
    But i got a issue that i haven't got the whole information,which just have the value of data column,and null instead of the Dimension Members ;
    The DataSet as the below:
    Account,Period,Year,Entity,Project,Data;
    Null,Null,Null,Null,Null,5231.212
    Null,Null,Null,Null,Null,6231.231
    Null,Null,Null,Null,Null,NULL
    I have check the below ways:
    *1.Essbase Report*
    http://ServerName:27130/easconsole/console.html
    Execute the report script:
    //ESS_LOCALE SimplifiedChinese_China.MS936@Binary
    <Sym {SUPALL}{TABDELIMIT} {NAMESON}{ROWREPEAT}{NOINDENTGEN}{SUPMISSINGROWS}{MISSINGTEXT "0"}
    <COLUMN(Scenario)
    {DECIMAL 8}
    "BUDGET"
    <ROW(Account,Period,Year,Entity,Project)
    <DimBottom "Account"
    <DimBottom "Period"
    <DimBottom "Year"
    <DimBottom "Entity"
    <DimBottom "Project"
    Result:
    Account,Period,Year,Entity,Project,Data;
    ACC1,1,FY13,ORG1,PRJ1,5231.212
    ACC2,2,FY13,ORG2,PRJ1,6231.231
    ACC3,3,FY13,ORG3,PRJ1,#Missing
    *2.odi Interface*
    LKM Hyperion Essbase DATA to SQL
    EXTRACTION_QUERY_TYPE:ReportScript
    EXTRACTION_QUERY_FILE:C:\odifile\budgetdata.txt
    EXT_COL_DELIMITER:\t
    *3.oracle table*
    The data type oracle 's table ,the data is NUMBER,other is NVARCHAR2(80);
    Anyone can help me ,thanks
    Kevin
    Edited by: kevin123 on 2013-4-17 下午11:03

    Who has experience in this field,thanks

  • Can I just send the data to NIC's buffer in LV? (how to access data link layer?)

    Now, I need to send something over network, yet those are not packed in TCP/IP or IPX packet, them are just some data a device can understand.
    So the problem I met is seems I cann't send the data into NIC's buffer(I can do that in C, yet I want to use LabVIEW to do that)
    And I don't want to do that by using a CIN, every time the program call or exit the CIN,there will be a delay, it's would bring me a bad impace to my application.
    So is there anyone can help me with that? I really need some master can give me a comfirm!

    I'm not an expert on network communication, so maybe you can explain how data can travel on an IP based network without being wrapped in some packets from a protocol like TCP or UDP? Maybe it's possible for LabVIEW to do what you want, or maybe compiling your C code into a DLL (no need for a CIN) and calling that will be fast enough for what you want.
    In any case, I think I can answer one question:
    So, how long would we have to expect LV add/improve these functions? Could it be in next minor update?
    Not likely, nor is it likely to be in any other version soon. LabVIEW is not built to handle this sort of thing any more than PHP or perl are and I don't think NI will change it to be able to do so. For that you have C, which you can call through a DLL. Some DLLs are supported on RT targets as well, but I'm not sure what the criteria are. They are probably listed somewhere on this site.
    I assume that calling a DLL in an RT target will hurt your determinism, but communication code should not be time-critical code, unless your application is an application which requires high speed data transfers and synchronization between different nodes.
    Try to take over the world!

  • How to send the data manually

    Hi Experts,
      I need small information.when messages are gone into queue state due to one message 
    When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
    if i cancel the first message then remaining all the messages are processing successfully.
    So from that cancel message i want sent the data manually as business needs that data.
    Can all please tell  me how to send the data manually with steps.
    Thanks in Advance.
    Bhaskar

    Hi,
    I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
    In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
    Regards,
    Sarvesh

  • ABAP Proxies to send the data to PI

    I have a scenario to send some data from ECC to Legacy system in flatfile format. I would like to use ABAP client proxies on the ECC side and File receiver adapter to tranmit the data to Legacy system.
    I tried various sample scenarios and know how to send simple data using ABAP report program(which triggers the client proxy from ECC).
    But the question is if I have to read SAP data files and send the data conditionally based on certain criteria to the other Legacy system. How do we write the ABAP code with in the ABAP Proxie program?  Can any body share the real time coding procedure to achieve this. I am not good at ABAP.
    I absolutely have good idea how we can configure on the receiver side.
    Thanks in advance.

    Hi
    If I want to transfer only specific data from various SAP database files from ECC and then triggering the ABAP client proxy in the ABAP report program
    There are various ways to do this. Create a class that can call reports(forms) for various legacy system say L1, L2 and L3. now create 3 reports each for the systems .
    In XI create a generic structure which can satisfy L1, L2 & L3 and generate the proxy for this structure.
    now in reports for L1 pass the data from ERP tables specific to L1 and use the client proxy report to pass the data to XI and deliver the flat file. Similarly for others you can do
    now at XI you do conditional receiver determination. Identify the condition from the payload that can distinguish L1, L2 & L3. based on this you can pass the data to defined receiver.
    Hope this helps.
    Thanks
    Gaurav

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • Unable to send the data entered in sap portal

    Hi
    All
    i am trying to configure and test  Leave Request  from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
    Please share your valuable thoughts or solutions.Thanks in advance.
    Tanks
    Rafi Shaik

    Hi Rafi,
    We are also facing similar kind of issue.
    When i select type of leave as annual it is giving an error message as
    " Parameter  missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
    But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
    Please let us know how you have solved your issue?
    Thanks.
    -Suresh

  • HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    What backed up files?
    Available backups for an iOS device can be found in Edit > Preferences > Devices.

  • How do I verify my iCloud account when the email address apple wants to send the instructions to no longer exists?

    How do I verify my iCloud account when the email address Apple wants to send the instructions to doesn't exist?  I know I need to change the email account associated with iCloud but there doesn't seem to be a way to do so.  Any help would be greatly appreciated!! 

    Did you create an entirely new ID or did you just change the Gmail address to a new email address on your existing ID?

  • Error while sending the data using input schedule

    Dear Friends,
    I am unable to send the data using input schedule due to following error is occur while sending the data.
    The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
    Can anyone please help me to resolve the above error.
    Thanks and regards,
    MD.

    Hi,
    You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
    "H1" is a parent in the entity dimension so you should try sending to a child.
    Tom.

  • I have an old Mac G5 with OSX 10.5.8  After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

    I have an old Mac G5 with OSX 10.5.8
    After a crash of my HD, I reinstalled the CS3.
    At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
    Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
    Should I upgrade ACR? which is the latest version supported on my Mac?
    thank you

    Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

  • How to send the data from mac pc to External drive

    how to send the data from mac pc to External HDD
    or Pen Drive but with out deleting the preview as data

    You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
    Hope this helps

  • When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    You can't reformat it and not wipe everything on it.
    Have you tried a different USB port?
    Only other option, back it up on a different computer.

Maybe you are looking for