I want to track progress on my building projects with a tick sheet

Hi All
I want to use a ticksheet to track progress on my building projects.
I have between 10 and 15 projects running simultaniously, I would like to prepopulate the ticksheet and give the tick a value.
So when waking onto a site i would like to just tick work completed then get a % complete and be able to save/output/print etc. with a date stamp.
example:
                              Item value     Total value
setting out                   =1%          1%
digging trenches           =2%          3%
Footing                        =5%          8%
So I will get a grand total% if all ticks are ticked will be 100% if not all ticked the unticked value will be deducted from 100%.
Hope this makes sense.
Thank you

You may wish to repost in iOS apps section for Numbers. Most of
what you want seems doable; I am not sure about date stamp but
it may be doable using presence/absence of tick to make date entry
in a cell.
There are some very capable people answering questions in that
forum who should be able to provide a solution. It will probably
take some setup on your part; but after the initial work, you should be
able to touch a few cells to get the results you desire.

Similar Messages

Compiling Flash Builder Projects with ant - error

I'm fairly new to FlashBuilder as well as using ant to build projects.
I'm working on a project in FlashBuilder 4.5. I'm using a 3rd party SWC that contains an alchemy-compiled C application in the SWC. Building my entire project within FlashBuilder is working fine. However, due to other parts of the project (not imported into FlashBuilder) I need to build with ant on occasion.
The Class specific to the C app within the SWC is throwing errors when building with ant - it says it can not find the source. I had one recommendation to look into adding/editing something within the build.xml file, but I don't know what that addition/edit would be.
Any help appreciated.

Apparently related to switching workspaces... the error log identifies a path to an old workspace I changed out of weeks ago. I created a new workspace and moved the project (just the source, etc, not the settings) into it. been running fine for a while now... though funny how this problem didn't show up until yesterday.

.jar not working when building project with netbeans plugin and log4j

hey..
subject tells everything..if i build my project referencing log4j, i get a .jar file with 280 kb which is executable
if i add log4j and do some logging, code still works in netbeans, but buildung produces a .jar with 80 kb and an
attached lib-folder with the log4j.jar in it..if i uncheck copy requested libraries, i just get the 80 kb .jar file which
is not working
any hints?

Are you building the jar file using the fxdeploy ant task to build the Jar? That is required to have an executable jar file.
Also there was a change to the netbeans project structure, which may be a contributing factor.
Things to try: Upgrade to the latest netbeans 7.1 beta build, set up a new Java platform in nb that includes JavaFX, create a new JavaFX project and build it. This should produce an executable jar.

Build project with Netbeans using older version of Java

Hi,
I have Java 1.6 and Netbeans 5-5.
I need to build a project using Java 1.4.2.
Please let me know how can I do it.
Thanks,
Andrei

click right the "project folder", then "Properties" and under the "Libraries" tab change the Java platform.

Error while building sln with CMake

I am working on kinect for developing application. I am using CMake and visual studio 2010 for development. According to some website I recently installed Service Pack 1 and it's update also. Since then there are loads of error in visual studio cpp programs.
I'm not able to build projects with CMake. It says c and CXX compiler identification is unknown.
I am not able to run simple cpp programs too. Log says
>InitializeBuildStatus:
1> Creating "Win32\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild" because "AlwaysCreate" was specified.
1>FinalizeBuildStatus:
1> Deleting file "Win32\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild".
1> Touching "Win32\Debug\ZERO_CHECK\ZERO_CHECK.lastbuildstate".
1>
1>Build succeeded.
1>
1>Time Elapsed 00:00:01.25
2>------ Build started: Project: openni_grabber, Configuration: Debug Win32 ------
2>Build started 11-03-2015 19:04:35.
2>InitializeBuildStatus:
2> Touching "openni_grabber.dir\Debug\openni_grabber.unsuccessfulbuild".
2>CustomBuild:
2> All outputs are up-to-date.
2>ClCompile:
2> openni_grabber.cpp
2>C:\Program Files\Microsoft Visual Studio 10.0\VC\include\xlocale(323): warning C4530: C++ exception handler used, but unwind semantics are not enabled. Specify /EHsc
2>C:/Program Files/PCL 1.6.0/3rdParty/Boost/include\boost/exception/detail/clone_current_exception.hpp(10): fatal error C1189: #error : This header requires exception handling to be enabled.
2>
2>Build FAILED.
Please help me through this!

Hi Sayalee8333,
Thank you for posting in MSDN forum.
Since this CMake is involved to the Extensions tool
CMake - Cross Platform Make , this extension tool is
out of support range of this forum.
In order to resolve your issue better, I suggest you post this issue here,
click “Q AND A”, you will get better support there.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Applicant track progress of application php mysql

i have been asked if it is possible to make a track progress bar for customers who have made an application to become a member of a website
basically the user fills in an application form, they then have access to there user page
i need either a graphic or text progress status
showing
application submitted
deposit recieved
room reserved
reference with underwriters
confirmation of tenancy
they can then proceed to their userpage
ideally the customer wants this to be automated but i dont even think this is possible. if this has to be done with radio or check boxes thats not a problem
is there anything out there that i can do for this

Hi,
could you or someone tell me if ADDT supports protection against these methods you mention:
Protection from dictionary attacks, rainbow table attacks, brute force attacks, SQL injection attacks and much more??
And can this system work alongside ADDT?
thanks again

Want to Track WIP Assembly as Deliverable Actions in Project Management ?

Hello Guys,
Can any One Help me on this question,
I want to Track the Assembly of Work-Orders by Milestones,I want to define Deliverables Actions in Project Management and track Assembly of WIP ?
Is it possible to do with standard setups are I need to do some customizations ?
IS WIP Integrated with Project Management ?
Regards,
Satish

Hi
Standard functionality has not been designed to track in Projects the progress of the assemblies managed by work orders in WIP.
You will need to customize the solution by links between the work order completion action in WIP to a deliverable completion in PJT.
Dina

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album. How do I get them back together again other than a playlist. I do not want the tracks showing up as albums on the Touch?

Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
iTunes: Grouping Tracks Into Albums

My iphone.4 has been stolen,i want to track it with another iphone or my pc ... is that possible ?

my iphone.4 has been stolen,i want to track it with another iphone or my pc ... is that possible ?

IF you installed and activated find my iphone on the iphone iself BEFORE it was stolen, AND it is on, AND it has not been restored, then you may be able to track it.
Since you are asking the question, I am guessing that you did not install find my iphone.
If this is the case, then, no, you cannot track it.
Sorry.

Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out

Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out

Unfortunately if you did not set up 'Find My iPhone', there is no way to remotely track or wipe the device.

How to made Flash Builder Project in Flash 4.0

I am using Flash Builder 4 and facing issues for make its flex project in Flex 4.0 and i have made it successfully in Flex 3.0 with help of BlazeBS-bin 2.6. If i tried to made project in Flex 4.0 then it is giving an error " Only LiveCycle Data Services 2.6 and higher are supported." and i also download BlazeDS-bin-3.2 and use it to create a project but it is still giving me this error, please help me .........
Thankx in Advance

Hi Codex
Welcome to the forum.
I suppose the only question is does your superdrive support dual layer discs?
Looking at your specs I'd assume it does. That being the case the only other thing to do is decide how the layer change will occur. I'm pretty sure the default is to create the layer break automatically but to check this highlight the disc icon at the very top of the Outline window. In the Disc Inspector select the Disc/Volume tab. Set the Disc Media to the 8.54gig option and the greyed out features below become available.
The simplest route is to just leave them all as default, but this will mean that DVDSP will choose a point at which the layer change will occur and that may be right in the middle of something where you don't want a slight pause while it jumps to the next layer. You can place a marker in your track which is a layer-break-point marker (tick the box in the marker inspector) forcing the layer change. From memory the DVD spec prefers Layer 1 to be larger than Layer 2 (someone please correct me if I'm wrong) - all of this is covered in the manual so you might want to check up on the details there.
Then insert your disc and hit Build&Format.
Happy Burning
Cheers
B

How can I use all tracks from multi-channel source audio with Multicam clips?

I cannot figure this out. Working in Premiere I'm prepping for a 2 camera show, with typically 4 to 6 track dual-system audio recorded by the sound guy. I can sync, and make multicam clips any number of ways–whether sync by timecode, sync by audio, or eyeballing–but whenever I edit using the MC clip, Premiere mixes down all the audio channels into a stereo single track, and I cannot pick and choose which audio track from the original to use. With 2-5 people mic'd on lavs, I need to be able to choose which audio is either cut in or heard at any given shot.
Is there any way to have control in multicam clips over which track of audio gets edited into the timeline, or even: that all tracks of audio get cut in? It's very important for the editors to be able to see waveform (which also disappears for some reason in the mixdown) and pick and choose which audio is heard?
I'm sure this might be a simple fix, but I cannot get my head around it for workflow purposes for my assistant editors. We need to use multicam, but this audio thing is driving all of us crazy. None of us can figure out how to have a multicam clip and use it with control over what audio is cut in.

True, but what I need to be able to do is have my multicam sequence in the source monitor, and cut into my working sequence with either just the audio I need from the sound guy's multi-channel WAV, OR cut in all the sound and from then I can just enable or disable what I need or don't need. But also be able to match back to the Multicam source from my working sequence.
I don't want to have to open the synced sequence, and razor blade the things I need and have to copy and paste into my working sequence in order to have the full spectrum of my multi-channel mono lav WAV files...with their waveforms visible.
Essentially, I want my Multicam clips to load in the source monitor, and the ability to cut them into the working sequence without it mixing down the audio into a single track with no visible waveform–which is what it is doing currently. Can I choose to edit in either ALL of the tracks of the WAV file along with the camera shot I want, or control which audio gets cut in?

Error: The folder does not contain a valid Flex Builder Project.

HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text

"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

Trying to build Mplayer with enable-aa

My son wants to watch video in ascii mode, but the arch version of mplayer is compiled without support for aalib. I've tried to make my own version
using the current pkgbuild and changing "--disable-aa" to "--enable-aa", but after a while of compiling, the build aborts with the following:
libvo/libvo.a(vo_aa.o): In function `uninit':
vo_aa.c:(.text+0x17d): undefined reference to `aa_close'
libvo/libvo.a(vo_aa.o): In function `draw_slice':
vo_aa.c:(.text+0x325): undefined reference to `aa_fastrender'
vo_aa.c:(.text+0x35b): undefined reference to `aa_render'
libvo/libvo.a(vo_aa.o): In function `draw_frame':
vo_aa.c:(.text+0x44a): undefined reference to `aa_fastrender'
vo_aa.c:(.text+0x4ae): undefined reference to `aa_render'
libvo/libvo.a(vo_aa.o): In function `preinit':
vo_aa.c:(.text+0xa8a): undefined reference to `aa_displayrecommended'
vo_aa.c:(.text+0xa8f): undefined reference to `aa_getfirst'
vo_aa.c:(.text+0xaa2): undefined reference to `aa_displayrecommended'
vo_aa.c:(.text+0xaa7): undefined reference to `aa_recommendhi'
vo_aa.c:(.text+0xaae): undefined reference to `aa_defparams'
vo_aa.c:(.text+0xab3): undefined reference to `aa_autoinit'
vo_aa.c:(.text+0xace): undefined reference to `aa_autoinitkbd'
vo_aa.c:(.text+0xaec): undefined reference to `aa_resizehandler'
vo_aa.c:(.text+0xaf9): undefined reference to `aa_hidecursor'
vo_aa.c:(.text+0xafe): undefined reference to `aa_getrenderparams'
vo_aa.c:(.text+0xbdb): undefined reference to `aa_defrenderparams'
vo_aa.c:(.text+0xbe6): undefined reference to `aa_defparams'
vo_aa.c:(.text+0xbeb): undefined reference to `aa_parseoptions'
vo_aa.c:(.text+0xc0b): undefined reference to `aa_defrenderparams'
vo_aa.c:(.text+0xc26): undefined reference to `aa_defparams'
vo_aa.c:(.text+0xc2b): undefined reference to `aa_parseoptions'
vo_aa.c:(.text+0xc82): undefined reference to `aa_help'
vo_aa.c:(.text+0xdea): undefined reference to `aa_close'
vo_aa.c:(.text+0xe28): undefined reference to `aa_displayrecommended'
vo_aa.c:(.text+0xe2d): undefined reference to `aa_recommendlow'
vo_aa.c:(.text+0xe38): undefined reference to `aa_displayrecommended'
vo_aa.c:(.text+0xe3d): undefined reference to `aa_recommendhi'
vo_aa.c:(.text+0xe48): undefined reference to `aa_displayrecommended'
vo_aa.c:(.text+0xe4d): undefined reference to `aa_recommendhi'
libvo/libvo.a(vo_aa.o): In function `printosdtext':
vo_aa.c:(.text+0xf0b): undefined reference to `aa_printf'
vo_aa.c:(.text+0xf67): undefined reference to `aa_printf'
libvo/libvo.a(vo_aa.o): In function `flip_page':
vo_aa.c:(.text+0x105e): undefined reference to `aa_flush'
vo_aa.c:(.text+0x11bd): undefined reference to `aa_puts'
vo_aa.c:(.text+0x11f9): undefined reference to `aa_puts'
libvo/libvo.a(vo_aa.o): In function `check_events':
vo_aa.c:(.text+0x137f): undefined reference to `aa_getevent'
libvo/libvo.a(vo_aa.o): In function `resize':
vo_aa.c:(.text+0x1817): undefined reference to `aa_resize'
collect2: ld returned 1 exit status
make: *** [mplayer] Error 1
==> ERROR: Build Failed. Aborting...
Can someone help me out here? I imagine the answer is simple, but I can't get past this stage.

diff -ur MPlayer-1.0pre8.orig/configure MPlayer-1.0pre8/configure
--- MPlayer-1.0pre8.orig/configure 2006-06-11 20:35:47.000000000 +0200
+++ MPlayer-1.0pre8/configure 2006-06-13 12:43:01.000000000 +0200
@@ -4137,6 +4137,8 @@
_def_aa='#define HAVE_AA 1'
if cygwin ; then
_ld_aa=`aalib-config --libs | cut -d " " -f 2,5,6`
+ else
+ _ld_aa="-laa"
fi
_vosrc="$_vosrc vo_aa.c"
_vomodules="aa $_vomodules"
This patch will help.

I want to track progress on my building projects with a tick sheet

Similar Messages

Maybe you are looking for