I want to transmit and receive the transmitted audio signal using labview with usrp ...can i get some help to do soo...thanks in advance

plz help me

this example receives frames on the same port. By CAN design you cannot receive the frame you are transmitting. If you want to receive what you transmit in addition there are 2 options:
- use the second port of your CAN device for Receiving the frames you transmit
- use the Self Receiption mode (refer to the manual for further details ho w to use this mode)

Similar Messages

I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

I did all the following step to enable the dictation on my ipad3 but the icon is not showing on my keyboard. can I get some help

Dictation is not available on the iPad 2 (your profile says iPad 2)

How can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not availa

how can i get some help to cancel my single app month to month and/or upgrade to full creative cloud membership? please don't tell me to follow the guidelines because i've tried several times but the options to 'switch plan' or cancel plan' are not available on my screen

Keensy I have requested a member of our support team contact you directly via telephone. Once I was able to review the correct account it appears our support team has tried multiple times to contact you. I would recommend checking your SPAM filtering in case you need to receive additional messages from our support team.
I did request that you be contacted via telephone. I am sorry for all of the difficulties which you have faced.
For future viewers of this discussion when contacting our support team at Contact Customer Care it is imperative that you be logged in under the account tied to your membership/subscription. While there is cancelation options available you will have an increased chance of being offered an opportunity to contact our support team if your account entitlement can be verified. For this to be done you will need to be signed into the same account as your membership/subscription/registered software title.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

Acrobat X Pro is gone and only the trial for XI Pro is installed. Can I get X back?

I have CS6 Design Standard. On the seldom-booted (2x/month) Windows partition of my MacBook Pro Acrobat X Pro is gone and only the trial for XI Pro is installed. Can I get X back?
I don't know how/when/why the trial was installed because Windows is running for only a few hours a couple times a month. The most reasonable possibility is the App Manager. If it says there's an upgrade available I just click the button and pay no attention to details. I suspect amateurs like me aren't going to notice one additional character in the name, if that's what happened. If that is what happened I'll never use the app manager again for fear of replacing fully functional apps with trial versions with short lives. Of course I am open to the idea that I did else something stupid.
Thanks.
-Alan

The application manager should not have installed a trial version and XI is not an update for X. The manager should only install updates for the existing version.
To get AA X back you will have to reinstall it from your original media.

I dropped and cracked the screen on my ipod Nano 6G where can I get it fixed

I dropped and cracked the screen on my ipod Nano 6G - where can I get it fixed?

At any Apple Store or AASP

HT1414 when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

when I do this steps thy give me a massege says " the iphone could not be restored . An unknown error accorred (3149) " . Can I get some help ?

Try using DFU/Recovery mode to restore
1. Plug iPhone 4 to computer
2. open iTunes
3. Turn off iPhone
4. Press home and power button for 10 seconds
5. Stop pressing the power. Button but keep pressing down the home button
iTunes should say the following; "iTunes won't be able to use your iPhone until you restore your device"
Then you'll have the option to restore and it should work, it has worked for me in the past

What is the best Computer for HD video editing where can I get it under $3000-5000? Thank you!

What is the best Computer for HD video editing where can I get it under $3000- $5000.00?

The wording of your question suggests you may be new to video editing, in which case the types of projects you will be doing may not be the most complex.
Please accept my apology if that assumption is incorrect.
The cheapest computer available will edit 1080p video perfectly well but if you must have the "best" you will be looking at nothing less than a MacPro.
Too many people get hung up about the equipment they use and blame it for any inadequacies . . . when the most important component is the operator.

Help please! So my laptop died when i spilt coffee all over it. I had never synched my itunes (i know i know) and now i cannot access my tunes library. How can i get my library back ?! Thanks

Help please!
So my laptop died when I spilt coffee all over it. I had never synched my itunes (i know i know) and now i cannot access my tunes library. How can i get my library back ?! Thanks

See Recover your iTunes library from your iPod or iOS device. Even if you don't have such a device there are links in the article that will show how to recover your purchases.
In addition, the laptop may have drowned but the hard drive is probably fine. You should be able to find someone who can extract the drive from the laptop and recover your personal data from it.
tt2

Want to Transmit and Receive image file. Help??

I m implementing OFDM transceiver using NI 5640 cards and data to process is an image file. Both transmitter and receiver are separete. Problem is that at receiver side i m not getting the image while transmitter is working properly according to my approach. Please help me......

Hi Zaib,
to convert arrays is pretty basic, maybe you should also attend here!
1d to 2d: use a "build array" node (or use auto-indexing on the output of a FOR loop)
2d to 1d: this depends on your goal. you may use "index array" to get a row or column from the 2d array. you can use "reshape array" to do reshaping. you may use auto-indexing on the input of a FOR loop. As said above, this depends on your goals...
For your vis:
Sorry, I can't access them from home as I only have LV7.1 available at the moment...
Message Edited by GerdW on 05-18-2009 07:10 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My iPhone 5 is working perfect except for calls. The person receiving the call is not hearing me at all please I need some help

I need help with my iPhone 5 I'm hearing perfectly but the person receiving the call is not hearing me at all. Can anyone help. Thanks

You can call your carrier for troubleshooting but ultimatly this is common with the Iphone 5 and you will end up needing a warranty replacement.

I restored an iphone on a mac that it hadn't been previously synced with, and then accidentally clicked the sync button and now the music library on my mac is gone - can I get it back? If so, how do I get it back?

This is a crazy circumstance of events. We have an iphone that we use as our office line. My husband accidentally got his iphone wet so while we were submitting it to be replaced through AT&T insurance plan, I had taken the sim card out of the office iphone and put his sim card into it and he was using it for a couple weeks. Somewhere on this forum I had found the instructions for doing this and it worked. He set a passcode on it while he was using it. Then he got his new replacement iphone and we switched simcards back and was good to go with his newly replaced iphone. In the meantime the other office iphone had been forwarded to me and we at that time didn't have another person working in the office so the iphone sat off for about 6 weeks maybe. Of course, during those 6 weeks the passcode, that was set on it, was forgotten - tried a few different things he thought that he'd set it to with no luck. So I looked up what needed to be done and how to restore the iphone. This particular iphone had not been plugged into a computer since having the original sim card put back into it after my husband had used it with his sim card so it wasn't able to get past the not having the correct passcode by just plugging into a computer that it had been synced with. I restored it. And this maybe is where I messed up or where maybe the new Iphone/Itunes OS messed up. I did accidentally check the sync button once the iphone was restored. I looked at Itunes and realized the music in the library on the computer was gone as well as the playlists. This is such a bummer because this is the business macbook pro and we run boat charters so all of that music is what is on the boat's ipod and played during the charters. There are playlists for sunsets, for cloudy days, multiple reggae playlists, etc. totaling 80 different playlists and tons of music - so much hardwork went into making those. Is there any way to get it all back???? Please help if you can - I'd be ever so grateful. Thanks.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

HT204408 My applications folder has a black question mark on it at the bottom of my screen. I do not know what error I made, but my fan effect of the previous applications has gone away. Can I get some help with this?

One day ago I inadvertantly removed my applications folder. In it's place is a folder with a black question mark which appeared after I attempted to open up the applications file. Also, previously when I clicked on the file applications would open in a fan display. Could I please get some assistance with this?

...removed my applications folder.
From where? And to where?
If you trashed it and emptied the trash, what backup, if any, do you have? If it's still in the Trash, move it back.
If no backup, reinstall Snow, which will give you the version as of the DVD you use, then update back to 10.6.8, and run all other needed updates, including any security updates. This should save all your third party programs, as well as settings.
The white puff of smoke is nothing, it only means you moved it out of the Dock. If you still have it, or had it, as soon as you open it it would reappear in the Dock. The item in the Dock is only a kind of alias.

I hav4 been watching tv programs in almost HD....All of a sudden I no longer have the clarity....I don't know what I did to cause this.....can I get some help????

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/848500]]</blockquote>
What do I do to get a really good video from TV sites like HULU or XFINITY? I was doing very well and somehow I must have changed something..Don't know what????

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have been watching tv programs in almost HD....All of a sudden I no longer have the clarity....I don't know what I did to cause this.....can I get some help????

I don't know what I did to loose the clarity.....I dont know what Firefox uses to allow these TV programs to play........Xfinity and HULU were really good until something happened....

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I want to transmit and receive the transmitted audio signal using labview with usrp ...can i get some help to do soo...thanks in advance

Similar Messages

Maybe you are looking for