My iPhone 5 is working perfect except for calls. The person receiving the call is not hearing me at all please I need some help

I need help with my iPhone 5 I'm hearing perfectly but the person receiving the call is not hearing me at all. Can anyone help. Thanks

You can call your carrier for troubleshooting but ultimatly this is common with the Iphone 5 and you will end up needing a warranty replacement.

Similar Messages

I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?

I have an IPhone 4S and am using the Phonak Icom with my hearing aids. All works well except for when I get an incoming call I can't hear the ringing/ringtone in my aids. Any solution?

Did you get any answers?

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

The person receiving my call cannot hear me, why?

The person receiving my call cannot hear me. Why? What do I need to do?

Howdy zxcvasdfqwer1234,
The following article provies tips that can help restore functionality to your microphone.
iPhone: Microphone issues
http://support.apple.com/kb/TS5183
Cheers,
Allen

This website make problem for me, he open by it self everytime i try to open another websites Please i need some help

this website make problem for me, he open by it self everytime i try to open another websites
Please i need some help
http://yandex.ru/yandsearch?text=ццц&lr=1004

Dude, I don't think there's a user on this forum that would click on that link.

My ITunes works perfectly except for the ITunes Store which gives me the following message "I Tunes could not connect to the I Tunes Store. An unknown error ocurred (-3221)

Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
Make sure your network connection is active and try again.
But my network connection is active.
Help!

Hi davwatto thanks for taking the time to reply.
ok, so tried to open my safari which was version 5.1.7 and i received the error message:
safari can't connect to the server
safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
Safari can’t open the page.
Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
Not sure how to check the logs for itunes though
If you have any idea how to fix this issue that would be great as im at a total loss.
Thanks

Please, I need some help! my contact form stopped working

My client called to tell me the form on her site (or at least the "submit" stopped working. I'm too new at this to figure it out.
here's the link:
http://www.hickersonbrothers.com/Contact_Us/contact_hickerson_brothers_electric.php
Does anyone know what I need to do? Thank you in advance.
jeff

Thank you for taking the time to re-write the code so it'll work. That's over and above all expectations for help.
But before I replace the old code with your new code, I just wanted to know if it's an exact replacement for the excerpt I pasted above or does it somehow fit within the whole page of code?
Here's the whole page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>hickerson_brothers_contact_us</title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<META NAME="keywords" CONTENT="Electrical Service, Northern Virginia, VA, Residential Service, Affordable, Fully Trained Professionals, Electric, Service, Electrical, Commercial Service, Residential, Commercial">
<META NAME="description" CONTENT="Hickerson Brothers Electric Service is a family owned and operated business whose members have serviced the Northern Virginia area for over 30 years.We believe in making our customer’s comfort our number one priority. 100% satisfaction guarenteed.">
<style type="text/css">

</style>
<script type="text/javascript">

</script>
</head>
<body onload="MM_preloadImages('../Assets/Navigation/contactus_up.gif','../Assets/Navigation/pl uggedin_up.gif','../Assets/Navigation/aboutus_down.gif','../Assets/Navigation/aboutus_over .gif','../Assets/Navigation/aboutus_overdown.gif','../Assets/Navigation/residentialservice _down.gif','../Assets/Navigation/commercialservice_down.gif','../Assets/Navigation/commerc ialservice_over.gif','../Assets/Navigation/testimonials_overdown.gif','../Assets/Navigatio n/pluggedin_down.gif','../Assets/Navigation/pluggedin_over.gif','../Assets/Navigation/plug gedin_overdown.gif','../Assets/Navigation/contactus_over.gif','../Assets/Navigation/contac tus_overdown.gif','../Assets/Navigation/commercialservice_overdown.gif','../Assets/Navigat ion/testimonials_down.gif','../Assets/Navigation/testimonials_over.gif','../Assets/Navigat ion/residentialservice_over.gif','../Assets/Navigation/residentialservice_overdown.gif')">
<table width="892" height="571" cellpadding="0" cellspacing="0">
</table>
<table width="892" height="669" cellpadding="0" cellspacing="0">
<caption align="left">
</caption>
<tr>
    <th width="890" height="667" scope="row"><div id="apDiv13"><img src="../Assets/Photography/E_phone.jpg" alt="Call Eileen Hickerson Now" title="Call Eileen Hickerson Now" width="255" height="193" /></div>
      <div id="apDiv3"><br />
        <a href="/About_us/about_us.html" target="_top" onclick="MM_nbGroup('down','group1','Aboutus','../Assets/Navigation/aboutus_down.gif',1)" onmouseover="MM_nbGroup('over','Aboutus','../Assets/Navigation/aboutus_over.gif','../Asse ts/Navigation/aboutus_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/aboutus_up.gif" alt="About Hickerson Brothers Electric" title="About Hickerson Brothers Electric" name="Aboutus" width="250" height="30" border="1" id="Aboutus" onload="" /></a><br />
          <a href="../Residential_service/residential_service.html" target="_top" onclick="MM_nbGroup('down','group1','Residential','../Assets/Navigation/residentialservic e_down.gif',1)" onmouseover="MM_nbGroup('over','Residential','../Assets/Navigation/residentialservice_ove r.gif','../Assets/Navigation/residentialservice_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/residentialservice_up.gif" alt="Hickerson Brothers Electric Residental" title="Hickerson Brothers Electric Residental" name="Residential" width="250" height="30" border="1" id="Residential" onload="" /></a><br />
          <a href="../Commercial_service/commercial_service.html" target="_top" onclick="MM_nbGroup('down','group1','Commercial','../Assets/Navigation/commercialservice_ down.gif',1)" onmouseover="MM_nbGroup('over','Commercial','../Assets/Navigation/commercialservice_over. gif','../Assets/Navigation/commercialservice_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/commercialservice_up.gif" alt="Hickerson Brothers Electric Commercial" title="Hickerson Brothers Electric Commercial" name="Commercial" width="250" height="30" border="1" id="Commercial" onload="" /></a><br />
          <a href="../Testimonials/testimonials.html" target="_top" onclick="MM_nbGroup('down','group1','Testimonials','../Assets/Navigation/testimonials_dow n.gif',1)" onmouseover="MM_nbGroup('over','Testimonials','../Assets/Navigation/testimonials_over.gif ','../Assets/Navigation/testimonials_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/testimonials_up.gif" alt="Hickerson Brothers Electric Reputation" title="Hickerson Brothers Electric Reputation" name="Testimonials" border="1" id="Testimonials" onload="" /></a><br />
          <a href="../Plugged_in/plugged_in.html" target="_top" onclick="MM_nbGroup('down','group1','Pluggedin','../Assets/Navigation/pluggedin_down.gif' ,1)" onmouseover="MM_nbGroup('over','Pluggedin','../Assets/Navigation/pluggedin_over.gif','../ Assets/Navigation/pluggedin_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/pluggedin_up.gif" alt="Green electricity Plus" title="Green Electricity Plus" name="Pluggedin" width="250" height="30" border="1" id="Pluggedin" onload="" /></a><br />
<a href="/Contact_Us/contact_hickerson_brothers_electric.php" target="_top" onclick="MM_nbGroup('down','group1','Contactus','../Assets/Navigation/contactus_down.gif' ,1)" onmouseover="MM_nbGroup('over','Contactus','../Assets/Navigation/contactus_over.gif','../ Assets/Navigation/contactus_overdown.gif',1)" onmouseout="MM_nbGroup('out')"><img src="../Assets/Navigation/contactus_down.gif" alt="Contact Hickerson Brothers Electric" title="Contact Hickerson Brothers Electric" name="Contactus" border="1" id="Contactus" onload="MM_nbGroup('init','group1','Contactus','../Assets/Navigation/contactus_up.gif',1) " /></a><br />
          <br />
          <br />
          <br />
          <br />
      </div>
      <br /></th>
</tr>
</table>
<div id="apDiv18">
<div align="center">24 Hour Emergency Service</div>
</div>
<div id="apDiv11"><img src="../Assets/Photography/lady_on_phone.jpg" alt="Hickerson Brothers trusted service for over 30 years" title="Hickerson Brothers trusted service for over 30 years" width="254" height="193" /></div>
<div id="apDiv9"></div>
<div id="apDiv6">
<?php
$to = "[email protected]";
$subject = "Online Request for Electrical Problem";
// This is displayed when the email has been sent
$thankyou_message = "<br>
<b>THANK YOU $CustomerName!</b><br><br>
We'll contact you soon.
<p> </p>";
$from_email = "$EmailAddress";
$message = "Customer Name: $CustomerName\n
Email Address: $EmailAddress\n
Primary Phone#: $Primary\n
Secondary Phone#: $Secondary\n
Problem: $Problem\n";
if (!isset($_POST['CustomerName'])) {
?>
<form id="form1" name="form1" method="post" action="<?php echo $PHP_SELF;?>">
    <table width="0" cellspacing="0" cellpadding="0">
      <tr>
        <td><label for="CustomerName">Customer Name:</label></td>
        <td><label for="CustomerName"></label>
            <input type="text" name="CustomerName" id="CustomerName" /></td>
      </tr>
      <tr>
        <td><label for="EmailAddress">Email Address:</label></td>
        <td><label for="EmailAddress"></label>
            <input type="text" name="EmailAddress" id="EmailAddress" /></td>
      </tr>
      <tr>
        <td><Primary>Primary Phone#</primary></td>
        <td><label for="Primary"></label>
            <input type="text" name="Primary" id="Primary" /></td>
      </tr>
      <tr>
        <td><label for="Secondary">Secondary Phone#</label></td>
        <td><label for="Secondary"></label>
            <input type="text" name="Secondary" id="Secondary" /></td>
      </tr>
      <tr>
        <td><label for="Problem">
          <Problem>Electrical Problem:</problem>
        </label></td>
        <td><label for="Problem"></label>
            <textarea name="Problem" id="Problem" cols="45" rows="5"></textarea>
            <label for="Problem"></label>
        </td>
      </tr>
      <tr>
        <td> </td>
        <td><input type="submit" name="reset" id="reset" value="Clear Form" /> <input type="submit" name="Submit" id="Submit" value="Submit" /></td>
      </tr>
      <tr>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td> </td>
        <td> </td>
      </tr>
      <tr>
        <td height="16"> </td>
        <td> </td>
      </tr>
    </table>
    <br />
    <br />
    <br />
    <br />
    <br />
</form>
<?php
else {
    mail("$to", "$subject", "$message", "From:$EmailAddress\r\nReply-to:$EmailAddress");
// Display the thankyou message
    echo $thankyou_message;
?>
</div>
<div id="apDiv4"><img src="../Assets/Logos/Slogan.jpg" alt="familytag" width="171" height="116" /></div>
<div class="style2" id="apDiv">Drop us a line and describe what electrical problem you're having. If you're experiencing an emergency, please don't hesitate to call us immediately at: (703) 594-3913. Our phones are answered 24/7. Thank you. And sorry for the inconvenience.</div>
<div class="style2" id="apDiv10">
<p align="center">If you're experiencing an emergency, please don't hesitate to call us immediately at: (703) 594-3913. Our phones are answered 24/7. Thank you.</p>
</div>
<div id="apDiv2">
<div id="apDiv5">
    <h1 align="right">(703) 594-3913</h1>
</div>
<a href="../index.html"><img src="../Assets/Logos/Hickerson_bros_hr.jpg" alt="Hickerson Brothers Electric Service" title="Hickerson Brothers Electric Service" width="213" height="126" /></a></div>
</body>
</html>
Thank's for not giving up on me. I will look into a more secure form after this fix - good idea.
jeff

I have 2 iphoto libraries but one is lost, missing, cannot seem to find it... tried an apple care person - they were no help - we use Time Machine for external backup... but cannot find my older iPhoto library! I desperately need some help!

I have recently had something really odd happen within iphoto. My photos from May-Oct 2013 appeared to be missing from my primary Iphoto library.
last night I was trying to find any additional Iphoto libraries on my Imac... I could not find them... but then somehow the May-Oct 2013 library showed up and now I cannot find the "current" primary Iphoto library. I sought help from apple care today but no solutoin from them after 2 hours trying. I have timemachine that backs up my Imac each day to an external hard drive. When I open Iphoto while holding down the "option" key - it lets me choose which Iphoto library... but only (1) library comes up... I can't figure out what happened - but it seems that I must have more than one Iphoto library because yesterday I was able to see all my photos except the "gap in dates" from May-Oct 2013. Today - I can only open a Library called Iphoto2014... and it contains the photos from the gap in dates. I can't "see" any other options to open photos... but just yesterday there appeared to be a different library available.
Any advice or steps i should take to locate my missing photos - would be soooooo much appreciated.

I have recently had something really odd happen within iphoto. My photos from May-Oct 2013 appeared to be missing from my primary Iphoto library.
last night I was trying to find any additional Iphoto libraries on my Imac... I could not find them... but then somehow the May-Oct 2013 library showed up and now I cannot find the "current" primary Iphoto library. I sought help from apple care today but no solutoin from them after 2 hours trying. I have timemachine that backs up my Imac each day to an external hard drive. When I open Iphoto while holding down the "option" key - it lets me choose which Iphoto library... but only (1) library comes up... I can't figure out what happened - but it seems that I must have more than one Iphoto library because yesterday I was able to see all my photos except the "gap in dates" from May-Oct 2013. Today - I can only open a Library called Iphoto2014... and it contains the photos from the gap in dates. I can't "see" any other options to open photos... but just yesterday there appeared to be a different library available.
Any advice or steps i should take to locate my missing photos - would be soooooo much appreciated.

Is there a way to have two fields hidden from the user but active for the person receiving the form?

I have an order form where there are two fields that the original form filler does not fill out. The person who finally receives and processes the completed form needs to fill in those two fields. I'm not sure how to handle this. Any help would be appreciated.
Thanks,
MDawn

My suggestion is a folder level script, that controls the visibility of form objects.
Only if this script is installed the fields will be visible.
You need three things for this.
1. The folder level script that has to be installed in the javascript folder of Acrobat or Reader:
var ShowMeAll = app.trustedFunction(function(doc)
     app.beginPriv();
     var ShowMe = this.xfa.form.Form1.Master.ShowAllContent;
     ShowMe.rawValue = "Yes";
     app.endPriv();
2. A hidden textfield in the form (on the masterpage for example).
Let's say you name it "ShowAllContent".
Put this script into it's docReady:Event.
try
     event.target.ShowMeAll(event.target);
catch(e)
     this.rawValue = "No";
3. A script in the layoutReady:event of the subforms or form fields you like to show/hide depending on the presence of the folder level script.
if (xfa.form.Form1.Master.ShowAllContent.rawValue == "Yes")
     this.presence = "visible";
else
     this.presence = "hidden";

Does the person receiving the call pay or the person making the call, or both?

I now have the prepaid plan that is $0.99 on days I want to use my phone and Verizon mobile to mobile includes unlimited minutes. Can I call my girlfriend who has a Verizon cell phone and pay the $0.99 and she will not be charged per minute? Incoming calls don't charge the receiving party, do they?

If she has Verizon then it would count under mobile to mobile so your good.

Please i need some help,just got a movie on my iPhone and I'm not able to play it in my MAC , anybody knows how to do that?

i bought a movie on itunes from my iphone and now im trying to watch the movie in my mac and its not showing on my purchase list on my mac itunes
anyone can give me a help?

Did you purchase the movie or rent it? If you rented it, it cannot be transferred from your iPhone.
If you purchased it, are you sure you're using the same Apple ID on your Mac as you are on your iPhone? If not, you would be trying to watch a movie owned by someone else.

BPC 7.0MS Logic - Using NEXT(12) - Works fine except for december

Hi all,
I have a logic where I use TIME=NEXT(12) in order to save current year data to next year data. It works fine except for December.
Here is the script:
*REC(EXPRESSION=%VALUE%,TIME=NEXT(12),DATASRC=INPUT,CATEGORY=BUDGET)
Here is the generated records:
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JAN,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.FEB,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.MAR,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.APR,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.MAY,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JUN,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.JUL,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.AUG,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.SEP,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.OCT,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,2010.NOV,-42
LC,80300_PROV,BUDGET,INPUT,06100141,830060811,GA070,,-42
No time member is defined in the last row.
any idea? Which parameters define the next members, ie how it determines that NEXT(1) of 2009.MAR is 2009.APR?
thanks for your help,
Romuald

Hi,
I don't have NEXT property. I just have a PRIOR property which is correclty defined except for january. I think that is the problem. I'm going to add PRIOR property value on january members.
thanks for your answer,
Romuald

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Why is my iPhone 4 still not updated to version 8.02. Why is that when l call/receive a call the person in the other end can't hear me while sometimes it works all perfect. Help guys

l am using Iphone 4, l still did not receive update to version 8.02 and when l receive or call somebody the person in the other end can't hear me while sometimes its working perfectly normal. Help guyz any ideas

The iPhone 4 is not capable of running iOS 8. iOS 8 requires a 4s or higher.

My iPhone 5 is working perfect except for calls. The person receiving the call is not hearing me at all please I need some help

Similar Messages

Maybe you are looking for