I want to use a retro TV screen as a mask for an imported video. It works and previews correctly in iBooks Author but not when previewed on my iPad. Any workarounds or suggestions welcome.

Hi there
I've been trying to give my imported videos a new spin by using the screen on a retro TV image to play the video on. I've masked the screen in Photoshop, saved it as a transparent .png and placed it onto the page. I then place the video, size it to fit the screen, send it to the back and, as if by magic, the video appears to play on the TV. However, as soon as I preview the book and go to view it on my ipad, the video is back in front of the TV and the illusion is lost.
Is there any way around this or am I going to have to make all my TV screens the same rectangular shape as the video? Also, is there any way I can stop the video being played full screen? Some of my videos are over 50 years old and the quality is pretty poor at full screen.
Many thanks.

Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example.

Similar Messages

Adobe Photoshop CS4 message: "Licensing for this product has stopped working." I have the serial number but not the media. How do I use the software?

I recently tried to use Photoshop CS4 that I have on my computer but I get the message:"Licensing for this product has stopped working." I have the serial number but not the media. How can I use this version?

You can get the installer here: Download CS4 products
It will install as a fully functional 30 day trial. Entering your serial number will convert it to a permanent version, Standard or Extended, depending on what serial number you purchased.
If you still have the license problem. get back to me with your OS details and the error code.
Gene

What cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

Hello, depends on which 20in Cinema, but likely...
Apple Mini-DVI to DVI Adapter
http://support.apple.com/kb/HT3235

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

My friends's ipad dropped and the screen cracked and he wants to use the warranty. So does the warranties for apple cover those stuff.

My friend's ipad dropped and the screen cracked and he wants to use the warrranty. So does the warranties for apple cover this

AppleCare+ provides repair or replacement coverage, both parts and labor, from Apple-authorized technicians. Service coverage includes the following:
Your iPad
Battery1
Time Capsule or AirPort device4
Included USB cable and power adapter
Coverage for up to two incidents of accidental damage from handling of your iPad, each subject to a $49 service fee1
http://www.apple.com/support/products/ipad.html

I imported photos from an old iPhoto (2001) to photo library and can now see them as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
Do you have a backup copy of the library that you imported into to? If you do then bring it in and then use iPhoto Library Manager to merge the two libraries into a new, 3rd library.
If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library. But first you should cull out the small photos that would be the thumbnails from the 2001 library.
Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB. That should find all of the thumbnail files which you can then drag to the Trash. You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
OT

I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?

I have a new iPod Touch and one apple ID. I want to use My laptop aswell as my desktop computer for the one ipod, using the same apple ID. I have music on both computers and want to merge the two without losing any music or apps. How do I do this?
My iPod has music and apps from my apple ID that I downloaded to my iPod via iCloud and some apps that I got free from the store, straight onto my iPod, but my laptop has some music on it aswell, separate from my other library. I want to put the music from my laptop into my iTunes library which I want to use on both computers. Is it possible to do this?
Thanks.

- You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
- If y wnat to switch syncing libraries/computer see:
go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
If all the synced media like music is in the iTunes library of the second computer it is very easy.

I am using Iphone 5. Since the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal

I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
Can anyone share any info on it?

I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more.

I have used Firefox for over a year. For some reason it quit working and I can't seem to fix it. I uninstalled and reinstalled the download and it's still not working. When I click on the icon it says unable to connect.

I have used Firefox for over a year. For some reason it quit working and I can't seem to fix it. I uninstalled and reinstalled the download and it's still not working. When I click on the icon it says unable to connect.

Yes, if you repurchase it you may lose your progress. The exception would be a game that stored all your progress on a server under your ID
If you want to retain your progress you have two choices:
1. Don't apply the update.
2. Use your fathers account password to update the game.

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary systaem for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary system for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

iCal is designed for personal use, and isn't really meant to handle this sort of situation.
The best suggestion I can offer, though it's a trifle untidy, is: create a calendar for each therapist, giving each a different colour. Enter the availability for each therapist - if it's on a weekly basis you can make them repeating events. Then add the individual appointments, which will show alongside in the daily view. In this example, the 'purple' therapist is available from 1030 to 1700 and has appointments at 1200 and 1500.
If you have more than a few therapists available at any one time it's liable to look a bit messy, but it's the best I can think of at the moment.

Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

Hi, I've just downloaded Aperture 3.2 and transfered all my iPhoto Library but now when I use the Aperture program it runs at the slowest speed possible and is almost impossible to work with. It is constantly processing why is this?

You can click on the text that says 'processing' in the main windows and it will open (toggle) the Activity Window, (can also be accessed via the Window menu -> Show Activity.
It will tell you what Aperture is doing with more precision and perhaps even how many photos it still needs to process. It is generally best to wait until all that processing is done before you start working with the photos (well it is best to first turn of options what you dont want to use, perhaps Faces or Previews and then let it process the new photos).

TS1398 My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now. Nothing has changed. I've gone through all of Apples suggested troubleshooting guides but it still won't work! Help?

My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now.
My daughter also has an iPad and an iPhone and these too won't connect either (use the same iTunes account)
Nothing has changed since this morning, I've gone through all of Apples suggested troubleshooting guides but it still won't work!
Help?

p.s. I just signed out of my apple id on daughters iPad and tried to create a new apple ID and still got the message CANNOT CONNECT TO ITUNES STORE......
so is this a problem with apple rather than my devices? Just seems weird that all our apple devices are doing this this afternoon when they were just fine this morning.......
P.P.S Just got a text from a friend with iphone and ipad......they are having same issue so at least I know it's not just me, so what's going on here APPLE?????

I want to use a retro TV screen as a mask for an imported video. It works and previews correctly in iBooks Author but not when previewed on my iPad. Any workarounds or suggestions welcome.

Similar Messages

Maybe you are looking for