I was told to delete user.js file to stop viewing the "tour" page on start, file does not exist, problem remains

i updated, i start firefox 2 tabs open one is "take the tour" tab the other is google, done the tour, a few times it opens up again every time, start of the healing process by typing in the question '"i keep seeing thr "take the tour"page on startup,then following the steps of the expertise i go to help,trouble blabla and i end up looking for user.js so i delete it or rename in a folder that contains folders and other data that nothing in there is like user.js file, so in the following question that is formed above there was no answer so i stepped into this case (only i had to create an account that was not my desire in the process) , thats all i know of.

So, if you do not have the user.js file then you can rename or delete the prefs.js file (pref.js.sav) to see if that helps.<br />
Windows likely hides the .js and shows them as User and Prefs.
You can also try to delete the compatibility.ini file to force Firefox to reinitialize some other files.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Similar Messages

Error on deleting page group (Path ID does not exist)

Hello
I'd like to delete a page group of my project. Normally I have no problem with that. But sometimes the following exception is thrown and the group can not be deleted:
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while deleting page. (WWC-44130)
Path ID does not exist. (WWC-50001)
Can anybody help me?
Chrigel

hi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian

The file /_controltemplates/15/ does not exist

Hi Everyone.
We are planning to migrate from share point 2010 to SharePoint 2013.So we have created one POC environment to test the customizations(master pages,Page layouts,web parts,site definition,Site templates) in SharePoint 2013.We have installed Visual Studio 2012
to convert VS2010 solution.We have done with the converstion from VS2010 solutions to VS2012.
We have followed all the below steps to test the same functionality.
1.Install Visual Studio 2012 and reopen solution in VS 2012
2.Change .NET Framework version to v4.5
3.Update existing reference of Microsoft.SharePoint.dll to "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI". (may need to other dlls reference as well)
4.Add a property ‘SharePointVersion =”15.0"’ in <Solution> element in the manifest file. (otherwise it gets installed into SharePoint 14 location)
5.Update "_layouts" folder with "_layouts/15" reference.
6.Update "CONTROLTEMPLATES" with "CONTROLTEMPLATES/15"
6.Build your solution, deploy and Test.
After successful deployment we are not able to add the web part to the page.We are getting an error like the following.
The file '/_controltemplates/15/{Project folder}/{web part Folder}/{Web PartUserControl}' does not exist.
Any one can help me on this issue.
Thanks in advance
Regards,
Anil

Hi Everyone.
We are planning to migrate from share point 2010 to SharePoint 2013.So we have created one POC environment to test the customizations(master pages,Page layouts,web parts,site definition,Site templates) in SharePoint 2013.We have installed Visual Studio 2012
to convert VS2010 solution.We have done with the converstion from VS2010 solutions to VS2012.
We have followed all the below steps to test the same functionality.
1.Install Visual Studio 2012 and reopen solution in VS 2012
2.Change .NET Framework version to v4.5
3.Update existing reference of Microsoft.SharePoint.dll to "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\ISAPI". (may need to other dlls reference as well)
4.Add a property ‘SharePointVersion =”15.0"’ in <Solution> element in the manifest file. (otherwise it gets installed into SharePoint 14 location)
5.Update "_layouts" folder with "_layouts/15" reference.
6.Update "CONTROLTEMPLATES" with "CONTROLTEMPLATES/15"
6.Build your solution, deploy and Test.
After successful deployment we are not able to add the web part to the page.We are getting an error like the following.
The file '/_controltemplates/15/{Project folder}/{web part Folder}/{Web PartUserControl}' does not exist.
Any one can help me on this issue.
Thanks in advance
Regards,
Anil

Create a file if it does not exist when a script runs

I have a shell script I run using automator that puts on the clipboard a string like Page 001, Page 002 and so forth incrementing the number 00x everytime it runs. I use it when I need to sequentially name files when doing things like scanning documents and so forth.
Presently, I have to manually create a file "~/counter" and enter the integer to start counting from. So if ~/counter contains 0, pbcopy places "Page 001" on the clipboard and so forth
The shell script
<pre class="jive-pre">
#!/usr/bin/env bash
myvar=$(cat ~/counter);
let myvar=$myvar+1;
mycopy=$(printf "Page %03d" $myvar);
echo "$mycopy" | pbcopy;
echo "$myvar" > ~/counter;
</pre>
works fine now.
I want to modify the script so that if ~/counter does not exist, the script creates a file and initializes an integer value say 1 in the file. If the file exists, the script uses the integer used in the file.
How can I get this done?

And because I can not leave "Well Enough Alone"
#!/usr/bin/env bash
count=0
[[ -r ~/counter ]] && read count anyjunk_aftercount <~/counter
count=$((count+1))
echo "$count" >~/counter
printf "Page %03d" $count | pbcopy
The anyjunk_aftercount is just in case something else gets into ~/counter. Assuming the first non-blank field on line 1 is the count, then anything following the count will be stuffed into anyjunk_aftercount and since the script ignores it, it will go away when the script re-writes ~/counter with just $count

TS1702 I was having trouble freezing in Draw Something 2, I was told to delete the app and reinstall. I did this.....but cannot reinstall because the app no longer shows up in the iTunes App Store. I have bought a lot of items in Draw 2, and now have no

I was having trouble with freezing up in Draw Something 2... I was told to delete app and reinstall. So..I deleted the app and tried to reinstall but I cannot find the app anywhere!? I have looked and searched the App Store, went through purchases, my games, Cloud...etc..what should I do now? I have purchased a lot of inks and other things in Draw 2,,,will I be able to recover all?

I still find Draw Something 2 available:
https://itunes.apple.com/us/app/draw-something-2/id602881939?mt=8
though I haven't tried to download it. Are you sure you're logged into the iTunes Store account through which you purchased the app, and you're following these instructions?
http://support.apple.com/kb/ht2519
Regards.

I was told by comcast that we had a computer in the house with a malware virus, they even said that they were going to terminate our service if we did not get it fixed. Now this week we hear that there is a trojan malware virus, how do we get rid of it?

I was told by comcast that we had a computer in the house with a malware virus, they even said that they were going to terminate our service if we did not get it fixed. Now this week we hear that there is a trojan malware virus, how do we get rid of it?

Hello,
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
Check now whether your Mac is infected by Backdoor.Flashback.39!
http://public.dev.drweb.com/april/

Item does not exist. It may have been deleted by another user

Hi,
I am getting a strange issue with the error "Item does not exist. It may have been deleted by another user " with the below code which was under "RunWithElevatedPrivileges" in a application page.
public void test(int requestId)
SPList list= web.Lists["test"];
SPListItem lstItem = list.GetItemById(Convert.ToInt32(requestId)); //Error
But when I test the above code in a console application, it is working fine & I am sure the id exist in the list.
Can any one help me on this issue!
Thanks In Advance,
Kumar.

Ok.
Go to the sharepoint list and check the item with id is exist or not?
Retrieve the data using another column instead of id column.
Just for testing.
Check the below way also
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name=\"ID\"></FieldRef><Value Type=\"Integer\">" + id.ToString(CultureInfo.InvariantCulture) + "</Value></Eq></Where>";

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

Error System "Item does not exist. It may have been deleted by another user"

Error System "Item does not exist. It may have been deleted by another user" in sharepoint 2010
This is problem show when User new item in List . User open new item page about 3 pages and User save each one page when page save complete , User will save another page.
Sometime User can not save item , it show that error
This List not have workflow and code
Please let me know what is the issue ?

Hi,
Greetings. THis is a known issue and see the links for resolution
http://support.microsoft.com/kb/972225
http://social.technet.microsoft.com/Forums/office/en-US/638e4aa0-527c-4b20-a899-a0cf181983ec/no-item-exists-at-it-may-have-been-deleted-or-renamed-by-another-user?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

Form does not exist or was deleted by administrator

Hi everyone,
There was an Error when i pressed the button Preview in "Form and Ad Hoc Grid Management"
ERROR
Messages for this page are listed below.
Error
Form does not exist or was deleted by administrator.
Error
The form 1.Cement is invalid. Check log for details.
Did you see this message and how you solved it
Please show me the way to fix ít
Thank you so much!!

I hope you are on 11.1.2.X and have admin rights on planning app.
From Administation-> Manage->Form and adhoc grids
Now search for 1.Cement form and try to edit and save again...
Cheers!
Sh!va

HT1338 I cannot open my existing Pages files any longer. I get a message that my Pages needs to be updated. But when I go to update Pages, I am told I have the latest Pages. Is anyone else having this problem?

I cannot open my existing Pages files any longer. I get a message that my Pages needs to be updated. But when I go to update Pages, I am told I have the latest Pages. Is anyone else having this problem?

Maybe this discussion will help you : https://discussions.apple.com/message/23723460#23723460

HT5312 how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

how do i delete WRONG cloud ID from my ipod touch? it was typed WRONG and I cannot delete it because it does NOT exist and I don't know password for email accoutn that does not exist

someone please help, I can't even delete content because it prompts me for a password for an account that I mistyped - wth?????

Help deleting a file that does not exist

Hi,
We are trying to delete an .html doc that Dreamweaver swears
does not exist, but it is showing up in our site architecture.
Sadly, it has a similar name to something we really do need, and it
is creating all kinds of confusion. Has anyone ever encountered
this?

Bionic Woman wrote:
> Hi,
>
> We are trying to delete an .html doc that Dreamweaver
swears does not
> exist, but it is showing up in our site architecture.
Sadly, it has
> a similar name to something we really do need, and it is
creating all
> kinds of confusion. Has anyone ever encountered this?
Try this method first:
http://www.dougknox.com/xp/tips/xp_undeletable_file.htm
and a visual tutorial:
http://www.theeldergeek.com/delete_undeletable_file.htm
If that doesn't do it, check these methods:
http://www.pchell.com/support/undeletablefiles.shtml

I was told to delete user.js file to stop viewing the "tour" page on start, file does not exist, problem remains

Similar Messages

Maybe you are looking for