I was updating my phone to iOs 6 and an error occured on my computer. My phone has been frozen on the apple logo with the loading bar right below it. I cannot restart my phone because my power button doesn't work. HELP!!
After the error occured, my phone was stuck on the apple logo with the loading bar below it. I cannot restart it because my power button is broken, and it will not be recognized on my iTunes. Any help how i can get my phone off or back to working again?! HELP PLEASE!!!
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...
Similar Messages
-
I was updating my ipod touch and the updation had an error and it froze at the apple logo with the loading bar underneath. How do I fix it? I tried the turn off button home screen button and even the volume buttons. I cant get anything to work. Please help me.
Connect to itunes and retore.
-
i was recovering my ipod touch (i recently disabled it) and it told me an unknown error occured. Now my ipod has the apple sig with a loading bar on it. What should i do? Is it recovering?
What was the complete wording of the error message? Usually an error number is also given,
-
What could be wrong with my iMac? When switched on the screen displays the apple logo with a busy bar at the bottom of the screen. This displays the progress of the computer trying to do something. To fill the bar takes about 30 mins and then switches off
Which OS X is installed?
-
I was in the middle of texting my mom and the screen stopped working! It only stopped working in the middle but i can't even turn it back on because my password numbers won't work when i touch them! I also cannot reboot my ipod because the power button doesn't work! I need help on fixing this problem please!!
Try as best you can with broken button.:
- iOS: Not responding or does not turn on
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi my iphone is stuck in recovery mode and when i went to swtich the phone off the apple logo came up and the loading bar at the bottom. what do i need to do to get it back to normal.
If you want to start the Restore Process over then follow these simple steps. Restart computer. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.
-
I believe it's OSX 10.7.5 or .4, can't check now. I'm not able to boot up past the login screen. A bar comes up below the apple logo as if it's installing an apple update, but doesn't make any progress. Eventually, the bar goes away and just the apple logo and spinning wheel are there, then it just shuts off soon after. I've tried holding shift key on power up to enter safe mode, but nothing happens. Any help/ suggestions would be greatly appreciated. Thanks!
You can't backup without booting the computer unless you remove the drive. But it may be you have a more serious hardware problem, so I think you may be better off taking it in for service.
But here's what you might try since you now have an external drive.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your drive's main entry (topmost one) and click on the First Aid tab, then click on the Repair Disk button. This will fix the boot block if it's damaged. Next, select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button.
If you have no problems with the above, then quit DU and return to the Main Menu. Select Restart from the Apple menu. See if the computer will boot properly.
If you get this far you should backup the drive ASAP. You will need to prepare your external drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive. -
My Iphone 5s is neither restarting nor it is shutting down. Apple logo has been glowing and after each few minutes blue screen is coming for couple of second and apple logo is coming repeatedly.
Hello sarahim1955,
Welcome to the Apple Support Communities!
I understand that your iPhone is restarting and only displaying the Apple logo. In this situation, I would recommend reading over the attached article and using the information within to help troubleshoot this situation.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Have a great day,
Joe -
Does anyone know how to fix this? this is really annoying and it takes a loooooooooong time to turn on.
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
pls help me need help badlypls help me, need really bad
Look at this support article:
http://support.apple.com/kb/TS2570
Ciao. -
My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!
Hi Julio,
Here's a link for your question:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Cheers,
GB -
I have a virgin moble iphone that i found, the power button doesn't work and the phone is saying disabled,what can i do to fix it?
Probably nothing, the phone has a high likelihood of being stolen and if you try to Restore it you will run into Activation Lock. Turn it in to the local authorities.
-
Update for Windows was run this morning---it actually made me run it twice. I was initially able to use my phone but now I get nothing but the battery/power cord symbol. The power button doesn't work at all. I have tried soft boot of the down volume and power button. Seems to reboot but same screen appears. I cannot access anything on the phone. Is there any help on this?
Hey there, javadan! Thanks for letting us know about the problem with your software upgrade. I'm very sorry for the issues you're having. Based on the two attempts to process, I would have to say there was a problem with both install attempts. You may need to process a factory reset. Which model device do you have?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
Hi
I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
Thanks for any ideas in advance?You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Maybe you are looking for
-
"You will not be able to publish your resource plan..."
Hi all, Project Server 2010 with SP1 and Feb '12 CU. We've started experimenting with resource planning and have found a situation for which I have no explanation. For some projects, the resource plan functions work just fine. But we have a few wh
-
Getting error while Executing Recurrig Document in F.14
Hi, While exceuting the recurring document in F.14, SAP gives error message,"Session SAPF120 was not created". Can any one please advice me why this error came up and how to execute the recurring documents using the template. Thanks, Lavanya Edited
-
I have a Q10. In my Bold I could make a one key phone call (say H for home) from any window. Not anymore. Am i missing something?
-
ISR Adobe PDF Comment (ISR_NEW_LONG_TEXT)
Hi, We created a Scenario with Entry using Adobe PDF. Our problem occurs during the approval of the notification. When you try to Add a comment, your comment is not being saved. I bind the Add Comment field to ISR_NEW_LONG_TEXT. This only happens whe
-
CIN - Excise Invoice check in VF11
Hi, Requirement When the user tries to cancel the commercial invoice in VF11, an error message should be displayed if there is a subsequent Excise Invoice. This ensures that the user cancels the Excise Invoice before cancelling the Commercial Invoice