I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?
Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy
Similar Messages
-
IPhone 5 screen is black, when I connect to ITunes it says "to allow access please respond to your Iphone". Impossible with a black screen, does anyone know what the prompt is?
Hey 11doski,
Thanks for the question. After reviewing your post, it sounds like the display has a dark screen. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.
Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html -
There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...
abigailfromwaddell wrote:
There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...
You have activated rotation lock. Check the little switch near the volume control.
Stedman -
I have tried going into manage add-ons and also my internet security options but I can't figure out the problem.
Hi mumshi5,
The article you are trying to open is the PDF document. Are you able to open that article/journal in other browser?
You can try different browser, also let me know which application or service of Adobe you are using ?
Regards,
Ajlan Huda. -
Over the past couple of months, my iPhone 3GS has had dead spots on the left side of the screen, preventing me from using the r, d and x keys, the number 4 and the semi colon and comma keys. Does anybody have any ideas on why this has happened or any ideas that I'll be able to fix this problem?
Just a note; I can't put my phone to sleep or turn off as my lock button isn't working, so I'm using the AssistiveTouch settings.
Thanks.hannahhfoskett wrote:
I would gladly upgrade to the next model if my contract was due!
This has no impact on the ability to purchase a new iPhone... it simply means that the newer one will not be at a fully subsidized price.
You could always take it to Apple and do an Out of Warranty exchange (I'm assuming the device is out of warranty) for $149 US. -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
Does anyone know what "other" means in the sync summary bar? I have 850mb using storage space in my iphone and can't understand what that is. I have tried to delete everything, restore to factory settings and change the icloud account. Thanks.
Hi there AnthPy,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
-Griff W. -
I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.
Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results. -
Does anyone know what happened to printing your own photos in iphoto? There used to be a thing on the left hand side of iphoto that you used to create wallets, 5x7, etc. Now there is nothing there. Can anyone help me? I dont want to order stuff, i want to pirint my own.
what version of iPhoto?
LN -
Hi does anyone know what programme I can use to create DVD of a movie that I have created on iMovie? There is no iDVD on my mac. Is Burn any good? And if so, can I get it for free?
Thanks.There is no iDVD on my mac.
There is NO alternative. But iDVD is very easy to get.
iDVD is on the iLife 11 DISK. Buy here:
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
Is Burn any good?
iDVD is vastly superior, especially for movies. -
I purchased and Iphone 5 directly from apple, sim free over 12 months ago now. I have been using the phone on Vodafone with no issues. I have now upgraded to the Iphone 6 and therefore sold on the Iphone to a friend of mine. He lives in Ireland and therefore has a Vodafone Ireland simcard. Given that the phone was brought sim free from Apple directly, we didn't foresee that this would be an issue. However, when he goes to activate the phone, this message appears;
The SIM card inserted in the iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Does anyone know what I need to do? I have got onto Vodafone, and they have been useless!! Apple say the phone is out of the 12 month warranty and therefore want to charge £25 before they will even speak to me about it. I requested an NUC from Vodafone, however, they are saying they need a proof of purchase from Apple as I did not buy the phone from them. I do not have my receipt anymore as the purchase was over 12 months ago now.
Any advice much appreciated.
Thanks,
PhillNow you have discovered that a sim free phone and an unlocked phone are NOT the same thing. Had you purchased an unlocked phone from Apple, then you would not have had problems and as it is, a sim free phone is not the same and sim free will lock to the first sim card that you insert into the phone, so effectively, you phone has been locked to Vodafone and this is why you now have problems.
If your phone is locked to Vodafone, then they are the only ones who can unlock the phone for you - Apple does not and cannot unlock phone - this is the province of the carriers only.
You had the contract with Vodafone when you used the phone and so you need to keep on at them to unlock the phone for you. If they still require proof of purchase and you cannot give them this and they will not unlock the phone for you, then this phone is useless to the friend that you sold it to - he will never be able to use it and basically, you are looking at giving him a refund for the phone for the amount that he paid you for it.
You need to keep on at Vodafone to unlock the phone for you or give your friend a refund for the phone as it will be useless to him and he will never be able to use the phone.
Hope that you now understand that a SIM Free phone and an Unlocked phone are NOT the same and I hope that when you purchased your iPhone 6, that you bought an unlocked phone? -
For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?
You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
is the a way to restore my iPhone 5 when it is no longer activated since i erased all content and data it keeps giving me this window that says my simcard is not recognizable does anyone know what to do?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS
Maybe you are looking for
-
I have an iPod Touch 2G but have been having problems syncing my podcasts. The sync process does not seem to recognize when a podcast has been listened to on the iPod and will not mark it as read on the master list in iTunes. This morning I again tri
-
Exporting to PDF from rpt file and charts within not exported properly
I am having issues when export .rpt file to pdf report using crystal report java. When exporting from Crystal Report, it displays the charts and boarders properly but when exporting using Java application the back ground colors and boarders disappear
-
Is it just me or: Gateway Setup Assistant creates setting that I can't do manually. Specifically: 1. Network Address/Range styles invalid in Firewall under Server Admin - Firewall - Settings under Address Groups, there are groups 192.168.1-net 192.16
-
i have a toshiba satelite pro l450 e1510 laptop with windows 7 home premium installed.i have recovered windows 7 using recovery dvd.when start i get a window saying enter out of box,system audit mode,a generalise tab and some restart tab.i need to co
-
TS4268 Can't start using imessage
I am trying to sign-in with my apple id in imessage and facetime, but keep on receiving a message that i entered apple id or password wrong. I am sure they're right.