I was wondering if I could use Boot Camp and install Windows 7 on my black Macbook. I don't see where I can tell what year it is from in the about this mac option either...? Please help. I am afraid that my mac is considered vintage now :(

I read somewhere earlier that if my macbook is vintage, then I can't install windows/bootcamp. Maybe this is too big a venture for me to undertake anyway, but just in case I wanted to get a little help before I dig too deep...  I think it was late 2006 or early 2007 when I purchased my black Macbook.

To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
model 1,1 (Early 2006)
model 2,1 (Late 2006 & Mid 2007)
model 3,1 (Late 2007)
model 4,1 (Early 2008) 
model 5,1 (Late 2008, Aluminum Unibody)
model 5,2 (Early 2009, 2.0GHz Model Only)
model 5,2 (Mid 2009, 2.13GHz Model Only)
model 6,1 (Late 2009, White Unibody)
model 7,1 (Mid 2010)

Similar Messages

  • Late 2013 iMac 27".  Used boot camp and installed windows 7 pro.  While in Windows 7, in my pc the mac os does not show.  Is there anyway to fix this outside of restoring entire computer and trying again.  Thank you from a mac newbie

    Hello.  I bought a new iMac 27" with the following specs:
    3.5GHz Intel Core i7 Quad-Core (Haswell)
    32GB of 1600MHz DDR3 RAM
    3TB Fusion Drive
    NVIDIA GeForce GTX 780M Graphics (4GB)
    27" LED-Backlit IPS Display
    2560 x 1440 Native Resolution
    802.11ac/a/b/g/n Wi-Fi, Bluetooth 4.0
    Thunderbolt, USB 3.0, SDXC Card Reader
    720p FaceTime HD Camera, Dual Mics
    Mac OS X 10.8 Mountain Lion (64-bit)
    After installing all Mac update, used Bootcamp to create a Windows 7 drive.  Everything went fine to a point.  While in my Mac OS i can see the windows partition just fine and see/edit documents.  However, when in the Windows 7 Pro 64 bit, I cannot see the mac os in my computer at all. 
    Can someone please help this mac owner newbie?  This process worked fine on my mac mini and i have no troubles.  It is just on my new iMac that it wont work/show the highlighted paragraph above
    Any ideas and/or help would be greatly appreciated.

    I understand that much.  On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS.  This is NOT the case on my iMac.  Again, when in the MAC OS I can see the windows partion and move information between the two that way.  When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network.  The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar.  Both have same version of MAC OS so both should work same way..  When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have).  This iMac does not do that - only shows windows.

  • HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

  • I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

    Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

  • Using Boot Camp to install Windows XP: problems with display going blank

    I have a new Mac mini (early 2009) connected to an older NEC MultiSync LCD (VGA only) display through a KVM.
    I initially used the Apple Mini DisplayPort to VGA adapter to make the display connection.
    All worked fine with Mac OS X, but when I attempted to use Boot Camp to install Windows XP (Home), the display would go blank with the display saying "no signal" at some point during the install and I couldn't get the mini's display back without power cycling the mini. Numerous attempts at removing the Boot Camp partition, re-partitioning, and retrying resulted in nothing but frustration. I typically had to force the mini to boot from the OS X install DVD or Mac partition to make the mini usable again.
    I have used my LCD display and KVM combination with a variety of computers running a variety of operating systems, including older Mac minis running both Mac OS X and XP, with no problems. And I intend to keep using it, so I wasn't going to assume the problem was there!
    After noting that Apple had already released a [firmware update|http://support.apple.com/downloads/Mini_DisplayPort_to_VGA_FirmwareUpdate] for this adapter to address "[possible intermittent flickering and compatibility issues|http://support.apple.com/kb/HT3492]", I double checked that it was up to date--and it was. But, it made me suspicious that this adapter might have some more problems and be the source of the troubles I was experiencing.
    So, I got an Apple Mini-DVI to VGA adapter and tried that.
    No more display problems! Everything works fine with Mac OS X. Windows XP installed without so much as a flicker, and it works smoothly with my setup.
    I'm curious if I'm the only one who was affected by this problem?

    Restart your Mac while holding down the Alt/Option-key until you get to the Boot Selection Screen.
    Choose to boot OSX.
    Use the BootCamp Assistant to remove the Windows partition.
    Go to System Preferences then Startup Volume and rest the default to be your OSX volume.
    Reboot your Mac again.
    Follow the instructions from here http://support.apple.com/kb/TS3173 and use the BootCamp Assistant again to install Windows 7
    Stefan

  • Is it possible to use Boot Camp to install Windows on an external HD?

    So I don't use up space on my internal hard drive, would it be possible to use Boot Camp to install Windows to an external hard drive?

    Ok, so officially, you have to install it on your Mac's internal drive. Good, thanks for clearing that up.
    I guess the only simple alternative to installing Windows on your Mac's internal drive is to buy another Mac, and install it on there instead I mean, you could have a Mac Mini or a MacBook, and have that running Windows under Boot Camp.

  • HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

    i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
    why it`s stop?

    What is your exact machine and what's the error

  • Can I Use Boot Camp to Install Windows XP on Late2012 MacMini

    I can't remember everything I've read here in the Community, I still have my Windows XP laptop, haven't used it except to transport videos. Can I use Boot Camp to partition & install the XP on my Dec 2012 Mac Mini? Running Mountain Lion 10.8.5. I still have my Seagate ext HD 1.5 TB, connected to the Mini, but haven't reset it to Mac only. I'm having a slight prob with memory loss, mine, not the Mac's. I think I read that I can't do this with Mountain Lion, but when I try to find what I think I read, it's so far back, I can't get to it. Please help? Thanks in advance.

    The Late 2012 Mac mini only supports 64-bit Windows 7 and 8 versions, so you can't install Windows XP with Boot Camp.
    If you need Windows XP, download an application like Parallels, VMware Fusion or VirtualBox, create a virtual machine and install Windows XP there. You shouldn't have any RAM problem with Windows XP.
    OS X can copy to FAT and exFAT drives, so you can format your external drive in "MS-DOS (FAT)". First, open Finder, choose your external drive in the sidebar and copy all the files to the desktop. Then, use Disk Utility to format your external disk in "MS-DOS (FAT)" > http://pondini.org/OSX/DU1.html Finally, copy all the files back

  • Is it possible to use boot camp to install windows xp from only an update disk?

    Hello,
      I have recently come across some of my old windows applications and an update disk for windows xp sp1. All I have is the update disk and I partitioned my drive and booted into the CD. Whenever I got through some of the processes of the initial install it said that I had an update disk and prompted me to first install an earlier version of windows (in this case I do not own one). Is there anyway that I could bypass this part of setup and install windows using this disk (like I have on PCs with no operating system installed) or do I need to go out and purchase a copy. If there is anyway that you could help it would be appreciated very much because the way the economy is these days I would like to save a couple bucks here or there. Especially putting money to a company like Microsoft....it wouldn't suit my fancy. :D

    Ok, so officially, you have to install it on your Mac's internal drive. Good, thanks for clearing that up.
    I guess the only simple alternative to installing Windows on your Mac's internal drive is to buy another Mac, and install it on there instead I mean, you could have a Mac Mini or a MacBook, and have that running Windows under Boot Camp.

  • I have Mac OS X, using boot camp i installed windows 7.  installation was successful but when i try to select to boot back to mac os x via boot camp from Windows 7 control panel, its saying "You may not have privileges to change the startup disk..."

    from the boot camp control panel, highlighted "Macintosh HD Mac OS X", click on Restart button or click OK or click Apply buttons gave me "An error occurred while trying to change the startup disk.  You may not have privileges to change the startup disk.  Make sure you have administrative privileges and try again."
    Im logged in to Windows 7 as admin thou but still giving me the above message.
    i rebooted & the option key does not give me option to boot to Mac instead gives me a screen with lock then below is a blank field then a right arrow on the right side, i normally hit the power button from this screen
    please help
    thx

    sorry for digging up an old thread, but what was the problem?

  • I'm trying to use Boot Camp to install Windows 7 Enterprise on a 2011 MacBook Pro, but most of the drivers aren't installing correctly.

    Apparently, the only boot camp functions that work are restarting in Mac OSX and double-touch right-clicking, which I got after downloading the BootCamp 3.2 upgrade.
    This means no sound, no Direct3d (though I've installed the Intel drivers manually and that's now working), no keyboard functions, and no internet access by ethernet port or wifi, which means I won't be able to activate Windows and this install will soon die a quiet death.

    The Bootcamp Assistant version should 5.1.x. Please see Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support and Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support.
    The version of Bootcamp Drivers 5.1.5621 supports your Mac
    From Boot Camp Support Software 5.1.5621
    System Requirements
    MacBook Air (11-inch & 13-inch, Mid 2011)
    MacBook Air (11-inch & 13-inch, Mid 2012)
    MacBook Pro (15-inch & 17-inch, Mid 2010)
    MacBook Pro (13-inch, & 15-inch, Early 2011)
    MacBook Pro (17-inch, Early 2011)
    MacBook Pro (13-inch,15-inch & 17-inch  Late 2011)
    MacBook Pro (13-inch & 15-inch, Mid 2012)
    MacBook Pro (Retina, Mid 2012)
    MacBook Pro (Retina, 13-inch, Late 2012)
    MacBook Pro (Retina, 13-inch and 15-inch, Early 2013)
    Mac Pro (Early 2009)
    Mac Pro (Mid 2010)
    Mac Pro (Mid 2012)
    Mac mini (Mid 2011)
    Mac mini (Late 2012)
    iMac (27-inch, Mid 2010)
    iMac (21.5-inch & 27-inch, Mid 2011)
    iMac (21.5-inch & 27-inch, Late 2012)
    iMac (21.5-inch) Early 2013
    Windows 7, Windows 8, and Windows 8.1, 64 bit

  • Using Boot Camp to Install Windows 7.  Keep getting error message "Installer Disk Not Found"

    I'm partially throught the Boot Camp set-up process and keep getting the same error message when trying to install Windows.  The disk is in the drive, not sure why it's not recognizing it.

    I had this problem on my brand-new Mac Pro, but fixed it in my case by burning another copy of the installer disc (from the official download image, not a pirate copy lol) at a SLOWER speed, rather than allowing it to burn at the "maximum possible" setting. This gives the laser more time to properly record, but it didn't perceptually increase the time it took to burn the disc.
    I speculate that error-checking is too stringent, but weak; that is, not intelligent enough to correct any read errors. Of course, Apple's test configurations are likely using commercially-produced off-the-shelf discs rather than burned from downloads or they know to never use max speed out of habit.

  • Running Boot Camp and Installing Windows on external Firewire HDD

    Hello,
    In a few days i'll be taking delivery on an iMac i7. I would like to keep windows off of the internal HDD and let it run from an external HDD. I am told this can be done, but I cannot figure out how.
    When I start Boot Camp Assistant in Applications>Utilities, it wants to create a partition in the Mac HDD.
    So now it't time to be smarter than the machine. Here is what I figured could be done. I just need to know if I'm on the right track.
    I hold down the "C" key on startup with the Windows DVD in the iMac. That will start the Windows DVD and start loading the OS. At that point, Windows will ask me where I want to install the OS. I select the Firewire drive, assuming windows sees it. Is this correct? If so, then what about Boot Camp, or am I way off base here.
    Thanks for any support.
    Ron

    Never gonna happen, don't know where you read that FW was bootable. USB "sometimes" but you need to have the option in your BIOS setup for it. Not an option.
    You can always run Mac OS from FW.
    Maybe even put OS X using optical drive bay w/ SSD? and use the internal drive. But if you are so against putting Windows on your drive...
    Perhaps a VM (though not for gaming, it is decent especially on the new iMacs).

  • I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

    I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

    If you had been syncing notes on your iPod with iCloud before this happened, go to icloud.com and confirm that your notes are still there.  If they are, you could either email them to yourself one at a time from icloud.com or you could sign into your icloud account on your other iPad in Settings>iCloud and turn Notes to On to sync them to your other iPod.

  • Hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game on the windows and i cant find a proper program to actually setup the game someone help me please

    hi guys i used boot camp and turned my mac into windows and i wanted to play a pc game called guild wars 2 and i cant find a proper program to actually setup the game

    Only if you decide to share with us your particular situation. Guild Wars should install and run like any other Game. Other than the Game Installer, Games don't need some other installer to make them work. Only someone who reads the instructions for the proper installation.

Maybe you are looking for

  • Limitations of read-only JE Environments

    Hello all, I realized recently that our documentation on the limitations of read-only Environments is lacking. So for the next JE release I updated the javadoc for EnvironmentConfig.setReadOnly. The new text is pasted below. If you're using, or think

  • Windows 8 saying printer error, but still printing

    Okay so I just got a new labtop (hp) with windows 8 and the hp envy 4500 printer, everytime I print out something (via wireless connection) on the labtop in the right top corner, a popup will say error printing ( can't remember exactly what it says)

  • Setup of PRE & PSE V12 fails repeatedly even after reboot

    I have a working installation of Lightromm 5.3 Photoshop Elements V11 Premiere Elements V11 on a Windows 7 SP1 PC. After purchasing a new licenes of PSE&PRE V12 succesfully downloaded and unpacked all files. but Setup process fails even after reboot

  • Changing tabs order in the JTabbedPane (DnD)

    Hi, I have a JTabbePane with different tabs in it and I want to be able to drag one tab and insert between other two with the mouse. Kind of like you can reorder sheet tabs in MS Excel. Does any one have an idea how this behavior may be implemented?

  • Safari crashes repeatedly without opening

    Hi, I can't seem to open safari on my macbook pro this morning. I keep getting this crash report: Process:     Safari [415] Path:        /Applications/Safari.app/Contents/MacOS/Safari Identifier:  com.apple.Safari Version:     7.1 (9537.85.10.17.1) B