I work in the sound booth in my schools auditorium for plays. Ive seen people use the iPad to control the lights and sounds wirelessly, but i dont know how to do it myself. Help?
Is it possible to control the lights and sounds/do sound ir light checks from backstage via my iPad? Ive seen it done, but dont know how to do it. Is it just an apo?
It would have to be an app, but it would be hard here to guess which one. They may be using a remote control app (such as Splashtop Remote Desktop) to control another computer that is controlling the lights and sounds, or they may have a dedicated app that goes right into their system. You'd have to ask them - or do a search in the App Store, or perhaps do a search for "iPad Theater technical system" or something like that.
Similar Messages
-
Okay, My iPod needed an update so I tried to update it and all it is showing is an white apple logo. Its been like that for a day now. I don't know what to do. Ive asked some people and they told told me to take it to apple, at&t or go on iTunes onto the computer. So I tried to restore it and I don't know how. Ive tried alot of things and I still cant get anything done with my iPod all it shows is an Apple
Hello, kyleedement11.
Thank you for visiting Apple Support Communities.
I would first recommend going through all of the steps in the articles below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If the issue persists or your device displays a connect to iTunes graphic, process the steps in article below.
Use recovery mode
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H. -
When i try to put apps on my ipod touch it says it not authorized for this computer and to go on the website and do it. but i dont know how?
Hello Bobbie,
Have you authorized your iTunes library yet to play and sync your iTunes purchases? To do this, head to the Store drop down menu and choose Authorize This Computer. Then enter in your iTunes store account credentials and then try resyncing your iPod.
B-rock -
i ran the diagnostic test and got this result.please help me out friends
Microsoft Windows 7 Ultimate Edition (Build 7600)
TOSHIBA ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0015AB8402A8B010
Current user is not an administrator.
The current local date and time is 2012-05-15 09:28:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {3E4453B3-9F50-4117-8981-7391E871F420}
Description: Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 03:00:00 1970
Lease Expires: Thu Jan 01 03:00:00 1970
DNS Servers:
Adapter Name: {2E1A8652-B977-4486-A1C2-4D1EDC4204CF}
Description: Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller
IP Address: 192.168.1.18
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue May 15 09:21:21 2012
Lease Expires: Fri Oct 12 09:21:21 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-07 20:18:49.Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
I bought an ipod shuffle 2nd gen a few years back. i did try to set it up at the time but found it hard (i was young and impatient!!) got bored and never tried again. I really would love to start using it now, but i dont know how....please help!!!
Hello emmalemonjuice,
Why not take a look and make use of your iPod's User Guide?
http://manuals.info.apple.com/en_US/iPod_shuffle_Features_Guide.pdf
B-rock -
how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)
Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.
-
Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?
Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/ -
I have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help
i have lost my ipod touch 4g 32gb i have the serial number and i dont know how to find ? plz help plz plz plz plz email me if you want the serial key my email is [email protected]
Unless you had already set up
Apple - iPod touch - How to set up Find My iPod touch
there is nospecial way to locate your iPod, Apple will not help. Your SN is only good for identifying the iPod as yours if it is found.
Change the passwoard for all accounts used onthe iPod and report it to the police. Also see:
Reporting a lost or stolen Apple product -
i have a 2007 macbook and today the screen went all pixelated and i dont know how to fix it any help would be nice
Boot from your installer disc. If the problem is still present, then take it in for service.
-
please help me try to contact the owner of this phone IMEI **** ICCID **** i got his phone now with me but i dont know how to contact them first time i got it low battery contact me
I will explan more how i got this phone
Call me +**** Micky Thai
<Personal Information Edited By Host>A long shot but you might try using the phone to send an email to the phone asking the owner to call their mobile phone. If the owner has a computer they may get the email and get in contact with you.
But Roger's suggerstion of turning it over to the police is the best bet.
OT -
I pre-ordered an album and i did not get it! i payed 14 some dollars for it and never received it i checked to see if i bought it and it said i did. i looked to see if i could re download the album but i dont know how please help!
If you are in a country where music can be redownloaded then it should show in the Purchased tab in the iTunes store app on your phone, and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If it doesn't show there then does the Store > Check For Available Downloads menu option on your computer's iTunes find it ?
-
How to pair an i5 to my lexus, the car has a code of 1111, but I dont know how to pair it to my phone, can anyone help ?
From the iPhone User Manual:
Pairing Bluetooth devices
Before you can use a Bluetooth device with iPhone, you must first pair them.
Pair a Bluetooth device with iPhone:
1 Make the device discoverable.
See the documentation that came with the device. For an Apple Wireless Keyboard, press the On/off switch.
2 Go to Settings > Bluetooth and turn Bluetooth on.
3 Select the device and, if prompted, enter the passkey or PIN. See the instructions about the passkey or PIN that came with the device. For information about using an Apple Wireless Keyboard, see Apple Wireless Keyboard on page 24.
To use a Bluetooth headset with iPhone, see the documentation that came with the device.
Return audio output to iPhone when a Bluetooth headset is connected: Turn off or unpair the device, or turn off Bluetooth in Settings > Bluetooth. Audio output returns to iPhone whenever the device is out of range. You can also use AirPlay to switch audio output to iPhone. See AirPlay on page 30. -
how do i set up my 3g sim for my iPad? the sim is already activated but i dont know how to get it to work
Setting>Cellular Data>On
-
i was given my ipad mini as a gift and i cant restore it dont know the previous owners information? how do i fix it? i have tried everything on this wesite , forumas and in i tunes. i have restored it wiped it an di cant get thru set up because of the previous persons email linked to it.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.
See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..
Maybe you are looking for
-
how can I exit from the suggested product to purchase and finish step 3 of the installation of latest version of adobe flash player?
-
procedure has OUT parameters though function has returning a single value using return we also can have out parameters in function also.. so what is the criteria whether to go for function or procedure??
-
Can't resize Find window in Contribute (Windows 7 64 bit)
When I am editing a web page in Contribute, if I use Edit - Find, the find Window opens maximized and there are not options avialable to reduce the size to a useable window. Right clicking at the top has the size option grayed out, clicking the the
-
Safari crashes repeatedly when any 1 hit photo upload is attempted.
Hi all, I hope someone can help with this query as it's now been a few months and is driving me mad! Whenever I click on a the photo upload button in Facebook, Ebay, Preloved, Twitter, Wordpress etc, I get the spinning wheel then an immediate crash o
-
Flash player sur samsung tab 3
Bonjourn je viens de faire l'acquisition d'une tablette samsung tab 3 mais je ne peut pas jouer car je n'ai pas adobe flash player pouvez vous m'indiquer ou je peut me procurer ce produit pour l'installer sur ma tablette. d'avance merci