I worked on a trial of LR 5 on a catalog and now can't open my files in my LR4 after the trial has expired. How do I access my catalog now?
I upgraded my LR4 catalog for a trial LR5 and now can't open my original LR4 catalog. What do I do to open my files?
It sounds as if you are using the Lightroom 5 version from the creative cloud, and you don't have a subscription. The Lightroom behavior you are describing is what happens when you don't have an active creative cloud subscription. Upgrading catalogs from Lightroom 4 to Lightroom 5 does not do anything to the original catalog if you can find and start Lightroom 4, you should be able to start right where you left off. But any new files that you imported into Lightroom 5 will not be there. They will be on your hard drive and you can import them again. But you are going back to a catalog that was used up until you installed Lightroom 5. Hopefully, you didn't uninstall Lightroom 4.
Similar Messages
-
I downloaded the latest iTunes and I now can't open it or download another iTunes also the icon has turned to an application icon also no safari server
Take a look at this Apple document -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
Are you seeing a user-specific or system-wide problem?
Also, on a Mac you can reset Safari from Safari> Reset Safari, you'll probably see a similar option in the Safari menubar on your Windows computer. -
Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.
Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave -
3 websites gave me this message:- "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete." I chose to stop the script each time. However I have stopped too many scripts in Firefox and I can't open any website in Firefox anymore. I just get blank pages. What do I do now?
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Loaded os maverick now can't open xls file
I just updated OS Maverick and now can't open xls files - any idea?
What version of Office? If 2004 or X, upgrade to 2011. Or use one of the free alternatives.
Other than that, please provide more details. -
Cc trial expired now can't open cs6 files
I downloaded indesign cc to use while I was waiting for my cs6 to arrive. Now the files I save from cs6 will not open. I get a message that says my trial has expired, and the icons look like a blank white page. However, I can open the saved files from within cs6. How do I fix the icons and stop gettin the trial expired message? using Windows 7
First thing is to uninstall ID CS6 from control panel. Then download, install and Run the cleaner tool http://www.adobe.com/support/contact/cscleanertool.html to perform a clean un-installation of CC and CS6. Then go ahead and install ID CS6 again. Alternatively, to skip re-installation, you may try to right click on one of the blank icons InDesign file and then select open with and choose InDesign CS6 as its default program. Doing this should also fix the issue.
-
I upgraded to Mavericks and now can't open/save files
I upgraded my system to Mavericks 10.9.2 and now Creative cloud Indesign, Photoshop and Illustrator (the few programs that I've installed) will now not either open files, or if they do takes 3-5 minutes for simple files, and if they do open and I try to save them again they take even longer to save.
I've re-installed these programs... have throw away preference files, changed finder preferences, restarted multiple times, even zapped pram... nothing has worked!!!!
HELP!This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
These are the direct links to the 3 forums
http://forums.adobe.com/community/indesign
http://forums.adobe.com/community/illustrator
http://forums.adobe.com/community/illustrator
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to any/all of those forums, and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question -
MS Project 2013 Trial Download not visible in installed programs and thus can't open
I've consulted other posts however answer is not listed. I have followed the instructions to download the file. I've downloaded the 64-bit file and selected Open application on download however nothing happens. I've gone to my Control Panel
and Project 2013 is NOT listed. I've searched for Project 2013 in the start up menu to no avail.
Can anyone advise how I can get the software installed on my laptop? The fact it states the application has downloaded but it's not visible as a downloaded file is driving me crazy.
Please help
MarisaHello Marisa,
When you download the trial, it downloads the image file by name ProjectProfessional_x64_en-us.img
Do you see this file under your download folder? If yes, then you have downloaded the trial software successfully.
As a next step, you need to extract .img into a directory using any tools that unzip the .img format (e.g., 7-zip
http://www.7-zip.org/ ) and then install from it by running setup.exe.
Hope this helps.
Thank you,
Kiran K -
Moved user to a different computer, now can't open any files.
I moved my friends account and his home directory to a different Mac and now none of the files will open. The user account name and password are the same and permissions are under his name, but when we try to open a file none will open. If I try to open a Pages file, it crashes Pages. If I try to open a .doc file, I get an error that says "file format invalid".
His home directory is 9gb and the individual files are more than 0k so the information has to still be in there. I repaired permissions to no avail. How do I get this information back?Assuming the short user name of the account is "jim", Log in to the new Mac's admin account and enter these two commands into Terminal:
sudo chown -R jim:jim ~jim [press return, enter admin password when prompted]
sudo chmod -R u+rwX ~jim -
I downloaded the Adobe Reader and now can't open PDF files
I downloaded the Adobe Reader after notification on my MacBook Pro and now can't read PDF files
Yes, I was able to open PDFs until I downloaded the new version as per the alert on my MacBook Pro. I was using Adobe Reader often.
I downloaded whatever they sent me my way (11?) and my operating system is Mac05 (10.5.8-10.9 English).The message says I’ve already downloaded it. It didn’t mention file.org. I looked in my preferences and didn’t see Adobe Reader, only Flash Player.
I’m not terribly computer savvy, so I’m trying to figure this out. Any help would be appreciated. -
Message there is a problem with Adobe Reader/Acrobat. If it is running please exit and try again. 0.104
It is usually quicker to get a reply if you provide all relevant information, e.g. your operating system / your Reader XI version.
-
Upgraded to Win 7, now can't open .pdf files after installing Acrobat X
I upgraded OS to Win 7 from Win XP, reinstalled my Acrobat X software and now am unable to open any .pdf files created and saved prior to upgrading OS and reinstalling Acrobat X. I see LOTS of discussion here about this issue (There was an error opening this document. Access denied.) but could someone tell me in SUCCINCT terms what I need to do to restore my ability to open files I created previously. My version of Acrobat X is 10.0.0. Thank you for assistance.
HI szwarycz,
I will be happy to help.
Please tell me whether you have Adobe Reader or it Acrobat Professional X.
Meantime you can also try to go to edit preferences under categories choose General under general there is button called Select Default PDF Handler.
Click on that button and choose Adobe Acrobat X. Check the screen shot.
Also you can try right click on any PDF document and choose option "Open with" their you need to choose option "Choose default application"
then you need to search for Acrobat application. Also you can visit this Microsoft article: http://windows.microsoft.com/en-in/windows/change-default-programs#1TC=windows-7
Regards. -
You can transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can transfer other stuff by using the third-part programs discussed in this previous discussion:
Best iPod to PC
If you previously synced to another computer and do not have the backup files you will lose your app data. You will have to restore to factory defaults/new iPod and then sync to the new computer. -
Down loaded adobe x and now can not open recently viewed files
I downloaded the new version of adobe but I now can not open any files. I get a white screen and windows task manager says adobe in not responding.
Any suggestions. Thanks.Adobe has magically started to run again. I had the program running with just a white screen and after about a 10 minute delay it seems to be ok.
I hope that is the end of the problem. I have no idea what the problem was, maybe it was doing an internal update , I am not a computer whiz. -
I have just downloaded free trial versions of photoshop, lightroom and illustrator. Photoshop and lightroom working perfectly, illustrator saying the licence has expired and I my now purchase it. Help.
http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html
Maybe you are looking for
-
How can I get the cursor's position in a opened file and display a menu?
Hello, I want to make a program by which I will be able to display a panel/pops up menu at the corsor's current position, (In any text/doc file or in the desktop, we can display a menu by right click of the mouse.) Now I want my program to do the sam
-
i am trying to figure this out so i can start downloading music to my ipod from my computer please help
-
Changes Interactive forms after SAP_BASIS SP19, SUM in formcalc
Hi, after updating to SP19 of SAP_BASIS, formcalc has changed in sum() evaluation (I know it is strange): Before SP19 in this expression: Sum($form.IK.IN.DATA[*].N_HOD), Sum returns zero value if table has zero rows (nothing to count) now I get error
-
Can I replace an iphone 5 screen that is slightly scratched?
Is there any way for me to replace an iphone 5 screen?
-
HT5848 After I did update to 7.1 I still can't find iTunes Radio
After I did the update to 7.1 I still don't have the iTunes Radio tab in my music app