I would like to monitor execution Status/Activity?

I want to monitor for activity or lack there of in the MainSequence. I am thinking that I want to launch a New Sequence in the same Thread, but I am not clear on what Property/Method will expose a change that I can monitor? Thanks...

Jacy,
When you launch a new sequence in the same thread, you are actually changing control to the new sequence from the calling sequence. So, in your case, monitoring the MainSequence after calling NewSequence in the same thread would not give us any new information because nothing in MainSequence would change.
If you decide that you could launch the new sequence in a new execution, then you would have two sequences being executed simultaneously that you could monitor one from the other. If this sounds like what you are trying to do, I would recommend taking a look at the Knowledge Base How Can I Get the Status of Another Sequence Execution?
If you'd like, yo
u could also try to use the Synchronization Step Types, specifically the Notification Step Type, to notify another thread or execution that you have achieved some status that you choose. The Notification and Queue Step Types together are especially useful for passing data. The Synchronization Step Types are discussed in the TestStand User Manual(TestStand User Manual March 2001).
If you have any questions after reading the information above, let us know!
Shannon Rariden
Applications Engineer
National Instruments

Similar Messages

  • Would like to monitor and control a labview application with a hand held device.

    Would like to monitor and control a labview application with a hand held device.
    Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.

    LabVIEW doesn't run on a hand held device. But, check out these documents:
    Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
    "What OS is recommended for LabVIEW to run on a PDA?"

  • Would like to monitor teaming with snmp

    Hello,
    I would like to use snmp to monitor the state of teaming/vibe. I can't seem to find much information on the subject in general and none specifically to do with teaming/vibe. Does teaming/vibe have an OID? If not, is there some way I can give it one? It is a java process and I can monitor a process such as java with snmp but I can't differentiate between different java processes such as indexServer and icecore. Any information or links would be appreciated.
    Thanks!
    Toney.

    toneyc,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • I would like to connect a monitor to my mac to use two screens, what cord will I need?

    I would like to connect a 'non mac monitor' to my mac to use two screens, what cord will I need?

    Have you found your question yet?
    Well as you can tell this isn't very active especially when your asking a question in a cross platform trouble shooting forum.
    You don't say what computer you have so no one can even guess, you should put the model/year of the computer your on and the Mac OS version your using into your profile so we can help you better. (Example, 2010 MacPro, OS10.6 and Windows 7.)
    Try here and pick your computer to get more help. Click on the Communities link and then the Discussions link and you should find a post that has already asked your question or you can search and you should find a bunch also.
    From what I understand your Mac needs to support dual monitors and you need to have 2 video ports available and just get an adapter if needed for the connection between the computer and the monitor.

  • I would like to read the reliability monitor for period of october

    I would like to read the reliability monitor on my Laptop for the period of october.
    When I go to it it shows me the results of the period between 6. of august, when I bought the Laptop and the 25th of August.
    I am not able to find the results for september and october.
    Where can I change the date of the controlled period?
    Thank you for your help!
    Daniel

    Hi
    Check this Microsoft page.
    How to use Reliability Monitor
    http://windows.microsoft.com/en-US/windows7/How-to-use-Reliability-Monitor
    Here you can find info how to use a Reliability Monitor
    - Open Control Panel -> System and Security ->Review your computer's status.
    - Click Maintenance -> Check for solutions to problem reports -> View reliability history.

  • HT2589 We have purchase 5 apple minis and would like them all on one account.  That way we can monitor the use of these units.  they will be used strickly for a business application.  can I use one account in itunes or must i have multiple.

    We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units.  They will be used strickly for a business application.  Can I use one account in itunes or must i have multiple.

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

    I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

    The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
    For details see the store's web page on the Dual-Link display adapter.

  • MacBook Pro, OS 10.6.8/2.8 GHz/Intel Core 2 Duo/with 4 G memory and would like to hook up an external monitor.

    I have a MacBook Pro, OS 10.6.8/2.8 GHz/Intel Core 2 Duo/with 4 G memory and would like to add an external monitor.  I have the usual ports; 2 USBs, Ethernet, as well as a couple small ports that I do not know what they are for...  sorry .  First of all, is it possible to add a monitor or TV screen for a larger screen when using?  Secondly, if this can be done, what do I need to buy?
    Thanks so much!

    Yes, it should be possible. I think every MacBook Pro ever sold has some kind of port for an external monitor. You would have to nail down which kind of port your MBP has and where on your MBP it is located.
    Can you find the little "getting started" pamphlet, manual, or PDF that came with it? It should name the connectors.
    My guess? If the only ports you have besides USB and Ethernet are smaller than those, you could have a Mini DisplayPort.

  • HT1918 I have 2 active itune accounts on the same laptop, I would like to know if I can delete or cancel the newest account and if so how do I do this.

    I have 2 active itune accounts on the same laptop. My orginal account was set up 3 yrs ago I believe for an ipod that I have but I hadn't used it in a long time. I recently bought an iphone 4s and my daughter was helping me with itunes. She made me another itunes account under another email address that I use for facebook instead of using the account I already had. I have purchaed a few songs and ring tones from this new account, but since then I logged out and started using my old account a week or so ago. What I want to do is delete or cancel the newest account but don't know how to or what to do. The email I get from "Apple" is being sent to the email address I use for facebook and not to my orginal aol email account. Can you tell me what I need to do to? I only want one account and I would like to keep the old account.
    Thank you!

    Stop using the account.
    You need do nothing more.
    You will need to authorize your computer for both accounts as you have purchased from both accounts.

  • Questions regarding using the .monitor command to retur a animated image and we would like feedback to a designed webpage that is monitoring a 5kW windturbine:)

    I'm embedding a front panel image in an existing HTML dokument. I would like to use the command .monitor in the URL together with the refresh command so the VI automatic will reload every 20 secund. This actual work, but simultaneous I want to have the possibility to refresh manually so I don't have to wait 20 sec before new values is shown in the display. Is this possible to do?
    Another question: Since the real time display updates 1-2 times a secund the command .monitor is used to get a animated picture of the Real Time Display.
    There are several ways to add animation on to web pages. The techniques used h
    ere are the �server push� and �client pull�which makes the browser repeatedly reloads a changing inline image to provide crude animated sequences. This is not the most efficient way as this result�s in an image being re-transmitted for each frame of the animation. The command .monitor with the attribute refresh and lifespan in the URL trigger this �server push� and �client pull� techniques.
    I use this automatic refresh uploading of the display so that it each time shows different values, is this called crude animation?Then I'm wondering what I'm suppose to use the command lifespan to?I can't see the use of it in my display.....?
    link to the webpage so you can have a look at the display:
    http://134.7.139.176/.monitor?Real%20Time%20Performance.vi&refresh=20
    This is a project that I'm working together with another Norwegian friend. WE are very happy for feedback on our web page and displays go to: http://www.ece.curtin.edu.au/~peersena/ if you would like to view itThanks

    Annis,
    One of the other things to keep in mind is that the generation of an image does take some computing power so having the generation and the acquistion on the same machine is not always ideal. If you're using the machine that is publishing the front panel just to collect data it's not so much of an issue.
    If you really want to monitor in "Real-Time" using Remote Panels (requies LabVIEW 6.1) is your best option. This posting has more information on using Remote Panels and links to some live examples:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C0660000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=web+control&USEARCHCONTEXT_QUESTION_S=0
    Remote panels makes it possible to control the application remotely as well.
    With .monitor the only way I've been able to manually refresh is to "Shift+Refresh" on the browser.
    Regards,
    Kamran

  • I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate

    Hi, I have a iphone 4 with IOS 5.1.1 baseband 04.12.01 AT&T recently release me but I have presented a problem with the activation of the device, I have restored and updated and I get a message saying WE'RE SORRY, WE ARE UNABLE tO COMPLETE wITH YOUR ACTIVATION AT tHIS MOMENT, PLEASE TRY AGAIN LATER, OR CONTACT CUSTOMER CARE would like to know which means that message and I have to do to activate hopefully help me with this problem and I have 3 months with the phone saying same message ...
    thank you very much ...

    but can not be unlocked
    If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T.  It CAN'T be used with Tigo or Movistar.
    Your post makes very little sense.  Maybe you can get some help with English. 

  • I have a macbook and it is a dual boot system, I would like to be able to see the mac side of the system on a larger monitor.  I can hook to a hdmi cable and see the pc side, but not the mac side, any suggestions?

    I have a macbook that I bought second hand.  The mac has a dual boot system with bootcamp on one side and snow leopard on the other.  I would like to be able to hook to a larger hdmi monitor so that in both systems I could see better since on the leopard side the computer has PS4.  I have purchased the dvi to HDMI accessory and purchased the HDMI to DVI cable, and can see fine on the bootcamp side, but nothing on the leopard side.  Could somebody help me with configuring things so that it will see both side? 
    Also on a minor note, I need to purchase a new battery for this item and don't know which one to purchase.  Any help would be greatly appreciated, especially with the display/monitor issue.
    Thanks Sue
    ps sorry but the operating system is OS X

    When you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

  • I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

    I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

    What do you mean by "HD to VGA adapter converter"?
    Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
    Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
    In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
    You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
    Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

  • HT5219 I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    I would like to use my iMac 7,1 as a monitor for my Mac mini 2012. Is that possible and if yes, what type of cable connection do I need? Thank you.

    No. Your iMac only has DVI video connection. You would need an iMac with Thunderbolt.

  • I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

    I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

    They have a trial version you can test before you purchase. It limits you to 10 minutes of streaming before it starts inserting noise into the stream.
    But you may not need it. I've read a bit further, and it appears that you may be able to stream any system audio to an Airport Express without needing AirFoil since you have Mountain Lion. I though it would work only with an Apple TV, but I've seen mention that it works with the AE as well (I don't have one to try). When you get your Airport Express set up, go to the Sound (speaker) icon in the menu bar, hold down the Option key, and click the icon. You may see the AE listed there as a selectable output device; if so, select it and all your system audio should be sent to the AE, including Spotify.
    Regards.

Maybe you are looking for