IAS Scalability

Sanjeev,
I have installed my iAS on 4 CPU 4 GB RAM Server.
I have increased the max threads to 256 and created 2 kjs engines.
How do i bind kjs processes to specific CPU?.
By default how many connections will iAS have. Is there any restriction on
max no of threads per iAS instance.
Would appreciate if you could look into this and do needful.
Regards,
Renga

Several comments and ideas:
Binding processes to individual processes is a function of the operating system. On Solaris you use the /usr/sbin/pbind command to bind processes to individual CPU's. (Or the /usr/sbin/psrset to bind a processor to a set of CPU's.) I don't think there is a Windows equivalent. I assume that HP/UX & AIX have equivalent commands, but I don't know them.
I'd recommend adding at least one more kjs engine. Starting with 3 KJS engines and one KXS engine (each bound to one CPU) would be a good starting point until you do some performance testing to further tune.
I'm not sure what you mean by "how many connections". Do you mean database connections? That default is 64 per engine.
I think that increasing the number of threads to 256 is probably counterproductive. Thread tuning is, of course, application dependent. But I don't think I've ever seen an application that is capable of keeping that many threads busy. I'd suggest turning it back down to 64 unless you have performance tests suggesting that more is better.
There isn't any maximum number of threads per instance, but I think that there is a limit of 200 threads per KJS. (As I said though, I don't think an application could keep all 200 threads busy though.)

Similar Messages

Difference between scalable and failover cluster

Difference between scalable and fail over cluster

A scalable cluster is usually associated with HPC clusters but some might argue that Oracle RAC is this type of cluster. Where the workload can be divided up and sent to many compute nodes. Usually used for a vectored workload.
A failover cluster is where a standby system or systems are available to take the workload when needed. Usually used for scalar workloads.

Problem installing iAS 6.0 SP1 on HP-UX 11.0

I am trying to install iAS 6.0 SP1 on HP-UX 11.0. I could install iWS and directory successfully but iAS installation is failing by throwing the following error.
aCC runtime: ERROR: _main() not called
11. Register_NASA[25]: nawk: not found
in this aCC means ANSI C Compiler. does it mean that it requires ANSI C Compiler. kas, admintool,deploytool are working fine. no problem with directory also. i couldn't start KJS. i tried starting KJS by executing ./kjs in ias/bin, then it throwed the following error
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 16
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 32
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 128
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 256
I don't know where i went wrong. can any body trace the reason this problem. thanks in advance
regards
Ananda Rao

Hi.
when you say you have installed weblogic on the same machine several times and it worked, do you mean you have installed wls
6.1 sp1? Or do you mean you have installed other versions? If you have installed this version before then you might try
reinstalling with a fresh download of the install binary.
If you are still having problems then you might want to open a case with support.
Regards,
Michael
Nalika wrote:
Hi all,
I am getting following exception when installing WebLogic 6.1 sp1 in HP-UX 11.0.
Installing WebLogic ISV License on hpdln001.
Please wait and do not interrupt ....
Done!
bad document for elName=license-group doc=null ...returning null...
java.lang.NullPointerException
at com.bea.installer.registry.LicenseMerger.merge(LicenseMerger.java:96)
at com.bea.installer.registry.LicenseMerger.main(LicenseMerger.java:372)
After that WebLogic server does not starts by giving following error
Starting WebLogic Domains.
SHLIB_PATH=/space/hpdln001-1/v7/bea/wlserver6.1sp1/lib/hpux11:/space/hpdln001-1/v7/bea/wlserver6.1sp1/lib/hpux11/oci816_8
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
Missing license file for: WebLogic Server 6.1
I presume that I do have a correct license file since I already installed WebLogic
in same machine several times & it worked fine. I have installed almost all the pathes
to HP machine.
Thanks
Nalika--
Michael Young
Developer Relations Engineer
BEA Support

IAS 6.0 installation problem on Windows 2000 Server

I've been trying to install iAS 6.0 Test Driver Service Pack 3, but it just
does not seem to be doing anything, installation process shows me a progress
bar and returns "successful completion" screen, but really doesn't copy
anything to the specified location. I've tried setting my machine up with
static IP and DNS suffix, that made no difference at all. Someone suggested
related entries clean up from registry, don't see any of those entry in
registry. Don't know what to try next -- very frustrating.
Any help will highly be appreciated, this kind of urgent.
Thanks
Abdul

Hi Abdul,
Can you please tell me which webserver you are using with Test-Drive-Sp-III, it
should be iWS-4.1.
As you are trying it on a windows m/c, sometimes fixing the DNS-suffix in usual
way doesn't update the windows registry.
To make sure that it is added to the windows registry just run regedit and click
on the :
My Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters
key, you will see the Domain key value set to your domainname, otherwise enter
the domain name into this key value, and than reboot the m/c, and than reinstall
the iAS. It should work.
If you further encounter problems, please mail me back.
Sanjeev,
Developer Support Team iAS.
"Abdul R. Abubakar" wrote:
I've been trying to install iAS 6.0 Test Driver Service Pack 3, but it just
does not seem to be doing anything, installation process shows me a progress
bar and returns "successful completion" screen, but really doesn't copy
anything to the specified location. I've tried setting my machine up with
static IP and DNS suffix, that made no difference at all. Someone suggested
related entries clean up from registry, don't see any of those entry in
registry. Don't know what to try next -- very frustrating.
Any help will highly be appreciated, this kind of urgent.
Thanks
Abdul

Install IAS 9.0.3 Error on RedHat linux 7.3 & 8.0

Hi all,
I get an error when the installer comes to "Configuring Tools" - automatically starts the following tools, the OC4J Instance Configuration Assistant fails.
The error is:
ERROR: Caught exception during deploy
java.io.IOException: Permission denied
at java.ioUnixFileSystem.createFileExclusively (Native Method)
at java.io.File.checkAndCreate
at java.io.File.createTempFile
at java.io.File.createTempFile
at oracle.ias.sysmgmt.deployment.j2ee.console.j2eeDeploymentImpl.fetchEar
at oracle.ias.sysmgmt.deployment.j2ee.console.j2eeDeploymentImpl.getEarDeployer
All the other components (HTTP server, java security, oc4j & bc4j configuration assistant, Oracle 9iAS instance Configuration Assistant) have been started without any problems.
Any help is appreciated.
Regards,
Raghu

Looks like some file that's present in tmp or
/var/tmp during deployment cannot be overwritten
because of permissions issue. Please make
sure you don't have previous installation temp files
in /var/tmp or /tmp before doing new installation or
use the same use that installed the first instance.
You can try cleaning up tmp and /var/tmp and retry.
Also try setting umask 00 before installations.

How to make scalable text button

I'm learning Captivate at the moment and I cannot understand this at all...
I want to creat a text button. Captivate allows NO options to change the grey text box or blue rollover effect. So I find out that the only way to do it is to creat your own image button, BUT Captivate does not allow Illustrator import, thus the images are not scalable. This means that if I want to creat a text button that will have various sizes of widths the image will have to be stretched and this looks awful.
Someone please tell me that my only option is to not create a seperate image for every instance of text due to variance in width.......
Please help.
I tried calling the Adobe Technical Support line... I even spoke with a specialist. They did not speak English well and kept telling me over and over to import my own image... but that does not solve the problem, it still stretches!!! They basically said there is no way around this. I cannot believe this to be the case... Even powerpoint allows text button customization....
Thank you

The look and feel of the default text button object in Captivate is actually controlled by your operating system. So if you look at the same course onh a Windows 2000, Windows XP, and Windows 7 box, the buttons will all look slightly different. This is one reason that Captivate gives you the option to use other button types such as image buttons, which you can also create for yourself if you are handy with an image editor. There is currently no import facility for vector art from Illustrator or other similar programs.
Since the OS controls the default text button appearance, you don't have a lot of control over things like the corner radius etc, because in the OS, this might actually be square (e.g. in Win2000).
It sounds more to me like what you REALLY want is to be able to use some of the Captivate text caption types as if they were buttons. Some of these have rounded corners. Alternatively, you can create a rounded rectangle using the drawing tool and configure the corner radius and background colour any number of ways. The only things you'd be missing are rollover effects (doable with rollover captions) and interactivity. Lilybiri suggested that you can just place an invisible clickbox over the top of the caption to make it work like a button. The user will never know that it's the clickbox instead of the caption that they're clicking.
If you want even more options as far as interactivity triggered by other mouse events such as mouse over and mouse out, you can make almost any Captivate screen object interactive using the Event Handler widget from Infosemantics.
Free trial versions are available for download if you feel like playing.

How can I use Windows IAS to validate WLC management users?

I am having a problem using my Windows IAS radius server to validate management users for my 2112 Wireless Lan Controller.
I have defined the radius server and it works ok with the policy for validating wireless clients but not for WLC management users.
The Remote access policy seems to be set up correctly as the event viewer on the server shows:-
Event Type: Information
Event Source: IAS
Event Category: None
Event ID: 1
Date: 09/02/2011
Time: 11:06:06
User: N/A
Computer: UK01DC07
Description:
User xxxxxx was granted access.
Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxx
NAS-IP-Address = 10.10.45.210
NAS-Identifier = UK03NM01
Client-Friendly-Name = UK03NM01
Client-IP-Address = 10.10.45.210
Calling-Station-Identifier = <not present>
NAS-Port-Type = <not present>
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = UK03NM01 - login
Authentication-Type = PAP
EAP-Type = <undetermined>
But, the WLC log shows:
*Feb 09 11:06:06.612: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed. User:xxxxxx. Service-Type is not present or it doesn't allow READ/WRITE permission..
The WLC just returns the login screen
Any thoughts?
Thanks in advance
Richard

Event viewer shows :
Event Type: Information
Event Source: IAS
Event Category: None
Event ID: 1
Date: 10/02/2011
Time: 08:49:39
User: N/A
Computer: UK01DC07
Description:
User xxxxxxxx was granted access.
Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx
NAS-IP-Address = 10.10.45.210
NAS-Identifier = UK03NM01
Client-Friendly-Name = UK03NM01
Client-IP-Address = 10.10.45.210
Calling-Station-Identifier =
NAS-Port-Type =
NAS-Port =
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = UK03NM01 - login
Authentication-Type = PAP
EAP-Type =
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....
and IAS log shows:
"UK01DC07","IAS",02/10/2011,08:49:39,1,"xxxxxxxx","TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,"UK03NM01","10.10.45.210",,0,"10.10.45.210","UK03NM01",,,,,,7,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
"UK01DC07","IAS",02/10/2011,08:49:39,2,,"TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,,,,0,"10.10.45.210","UK03NM01",,,,,,2,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
It appears to me that IAS checks and passes the username/password as being valid but this response is ignored by the WLC
Richard

SSL VPN IP Address Assignment from IAS radius server

Can I use SSL VPN IP Address Assignment from IAS radius server?it can be done with acs server.are there some differ from the acs and IAS?

Hi,
I will suggest to setup a sniffer capture with ACS and look for the attribute that ACS sends for IP Address Assignment, once you know the attribute apply it on the IAS.
If you have any question do not hesitate to contact me.

Problem with SSL and IAS 9.0.4.3.0

Hi,
I want to use SSL for my own webservice, but when I enabled SSL for my AS then I can't use my Forms-Applikation.
I use a new installed Applikation Server Version 9.0.4.3.0 (Forms/Reports) on SLES 9 and the webservice is in a new OC4J-Container.
Without SSL is everything fine.
But when I made the changes to use SSL then I can use my Webservice with or without SSL, but I can't start the Test-Form-Mask (test.fmx) from the AS.
In the Java-Console I see the following:
oracle.forms.net.ConnectionException: 500
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
And in the error log from the Apache I see the following:
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561304,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/registry/default.dat
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561477,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/engine/RunformBundle_de_DE.class
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561497,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/engine/RunformBundle_de_DE.properties
[Mon Nov 5 17:45:52 2007] [error] [client 127.0.0.2] [ecid: 76187632590,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/ewt/alert/resource/AlertBundle_de_DE.class
[Mon Nov 5 17:45:53 2007] [error] [client 127.0.0.2] [ecid: 76187632640,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/ewt/alert/resource/AlertBundle_de_DE.properties
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0095: mod_oc4j's SSL is enabled for communication with oc4j, but the oc4j process it gets has a non-SSL port. Possibly a configuration problem.
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
I think the first 5 messages are not so important, but I don't know what the last 3 messages mean.
I can't find any mistakes in my configuration. I have tested it with the SUN-Java Plug-In and with the JIinitator, but is the same result.
Have someone a hint for me or better idea to use SSL with a webservice?
Thanks in advance.
Knut

I configured the HTTP-Server and the OC4J-Containers for Forms and my webservice for SSL.
But for Forms I don't need SSL, only for the webservices.
In the meantime I tested SSL with IAS 10.1.2.0.2 and there is the same problem.
I think the last 3 messages come from Web Cache, because everytime when I try to test whether the Web Cache is working these messages shown in the error log from Apache.
Sometimes are the following messages in the error log of the Apache:
[Tue Nov 6 16:07:58 2007] [warn] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: OC4J_BI_Forms
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0145: There is no oc4j process (for destination: OC4J_BI_Forms) available to service request.
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: OC4J_BI_Forms
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
But I can not figure out when these messages are written
Message was edited by:
Melman

Can't able to deploy webservice to IAS 10.1.2.0(window) by using Jdevloper

Hi,
I have got the successful msg in time of connect iAS 10.1.2.0 from Jdev 10.1.3 .
But when I tried to deploy a simple webservice to ias then I got following deployment message :
---- Deployment started. ---- Aug 18, 2009 10:38:47 AM
Target platform is Oracle Application Server 10g 10.1.2 (Windows) (OracleApplicationServer_Abir).
Wrote WAR file to C:\Webservice\Project1\deploy\WebServices.war
Wrote EAR file to C:\Webservice\Project1\deploy\Webservice-Project1-WS.ear
Invoking DCM servlet client...
C:\jdeveloper1032\jdevstudio10132\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\jdeveloper1032\jdevstudio10132\jdev\lib\oc4j_remote_deploy.jar http://157.227.124.85:18100/Oc4jDcmServletAPI/ ias_admin **** redeploy C:\OraHome_2 C:\Webservice\Project1\deploy\Webservice-Project1-WS.ear Webservice-Project1-WS OAS
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy C:\OraHome_2 C:\Webservice\Project1\deploy\Webservice-Project1-WS.ear Webservice-Project1-WS OAS
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = 9de37c5546b4f6f0200f5eb44dc8a2c0b7a90d89b533
Please, wait for command to finish...
Checking command status...
Angshuman
Setting userName to ias_admin
Setting Cookie to JSESSIONID=9de37c5546b4f6f0200f5eb44dc8a2c0b7a90d89b533
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-8)
#### HTTP return code was -8
Exit status of DCM servlet client: -8
Elapsed time for deployment: 16 seconds
#### Deployment incomplete. #### Aug 18, 2009 10:39:03 AM
Please help in this regards..

Run the following in your terminal where you have a sh shell.
export ORACLE_HOME= <give here the location of Oracle Infrastructure Home>
cd $ORACLE_HOME
sqlplus / as sysdba
## if you continue to get problems, then see the following file;
cat $ORACLE_HOME/network/ADMIN/sqlnet.ora
Check if you have a line with the following attribute:
SQLNET.AUTHENTICATION_SERVICES
make sure it is not missing, nor reporting a none value. If it does, change it to the following:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Save the file. Now restart infrastructure:
cd $ORACLE_HOME
opmn/bin/opmnctl stopall
opmn/bin/opmnctl startall
## now try getting into the database again.
sqlplus / as sysdba
hope that helps!

How ias integrate with Snacktory for getting main text from an html page

Hi All,
i am new to endeca and ias, i have an requirement, need to get main text from whole html page before ias save text to Endeca_Document_Text property,
as ias save all text in page to endeca_document_text property, it is not ok for reading when show in web page, i use an third party API to filter out the main text from original page,
now i want to save these text to endeca_document_text property,
an another question,
i get zero page when doing the logic of filtering main text from original html text in ParseFilter( HTMLMetatagFilter implements ParseFilter) using Snacktory.
if only do little things, it will work fine, if do more thing, clawer fail to crawl page. any one know how to fix it.
log for clawler.
Successfully set recordstore configuration.
INFO    2013-09-03 00:56:42,743    0    com.endeca.eidi.web.Main    [main]    Reading seed URLs from: /home/oracle/oracle/endeca/IAS/3.0.0/sample/myfirstcrawl/conf/endeca.lst
INFO    2013-09-03 00:56:42,744    1    com.endeca.eidi.web.Main    [main]    Seed URLs: [http://www.liferay.com/community/forums/-/message_boards/category/]
INFO    2013-09-03 00:56:43,497    754    com.endeca.eidi.web.db.CrawlDbFactory    [main]    Initialized crawldb: com.endeca.eidi.web.db.BufferedDerbyCrawlDb
INFO    2013-09-03 00:56:43,498    755    com.endeca.eidi.web.Crawler    [main]    Using executor settings: numThreads = 100, maxThreadsPerHost=1
INFO    2013-09-03 00:56:44,163    1420    com.endeca.eidi.web.Crawler    [main]    Fetching seed URLs.
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:46,519    3776    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:56:52,889    10146    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:52,889    10146    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:52,890    10147    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-1]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:56:59,184    16441    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:56:59,185    16442    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into HTMLMetatagFilter
INFO    2013-09-03 00:56:59,185    16442    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into EndecaHtmlParser getParse
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    come into HTMLMetatagFilter
INFO    2013-09-03 00:57:07,057    24314    com.endeca.eidi.web.parse.HTMLMetatagFilter    [pool-1-thread-2]    meta tag viewport ==minimum-scale=1.0, width=device-width
INFO    2013-09-03 00:57:07,058    24315    com.endeca.eidi.web.Crawler    [main]    Seeds complete.
INFO    2013-09-03 00:57:07,090    24347    com.endeca.eidi.web.Crawler    [main]    Starting crawler shut down
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    Waiting for running threads to complete
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    Progress: Level: Cumulative crawl summary (level)
INFO    2013-09-03 00:57:07,095    24352    com.endeca.eidi.web.Crawler    [main]    host-summary: www.liferay.com to depth 1
host    depth    completed    total    blocks
www.liferay.com    0    0    1    1
www.liferay.com    1    0    0    0
www.liferay.com    all    0    1    1
INFO    2013-09-03 00:57:07,096    24353    com.endeca.eidi.web.Crawler    [main]    host-summary: total crawled: 0 completed. 1 total.
INFO    2013-09-03 00:57:07,096    24353    com.endeca.eidi.web.Crawler    [main]    Shutting down CrawlDb
INFO    2013-09-03 00:57:07,160    24417    com.endeca.eidi.web.Crawler    [main]    Progress: Host: Cumulative crawl summary (host)
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]   Host: www.liferay.com: 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]    Progress: Perf: All (cumulative) 23.6s. 0.0 Pages/s. 0.0 kB/s. 0 fetched. 0.0 mB. 0 records. 0 redirected. 4 retried. 0 gone. 0 filtered.
INFO    2013-09-03 00:57:07,162    24419    com.endeca.eidi.web.Crawler    [main]    Crawl complete.
~/oracle/endeca
-======================================
source code for parsefilter
package com.endeca.eidi.web.parse;
import java.util.Map;
import java.util.Properties;
import org.apache.hadoop.conf.Configuration;
import org.apache.log4j.Logger;
import org.apache.nutch.metadata.Metadata;
import org.apache.nutch.parse.HTMLMetaTags;
import org.apache.nutch.parse.Parse;
import org.apache.nutch.parse.ParseData;
import org.apache.nutch.parse.ParseFilter;
import org.apache.nutch.protocol.Content;
import de.jetwick.snacktory.ArticleTextExtractor;
import de.jetwick.snacktory.JResult;
public class HTMLMetatagFilter implements ParseFilter {
    public static String METATAG_PROPERTY_NAME_PREFIX = "Endeca.Document.HTML.MetaTag.";
    public static String CONTENT_TYPE = "text/html";
    private static final Logger logger = Logger.getLogger(HTMLMetatagFilter.class);
    public Parse filter(Content content, Parse parse) throws Exception {
        logger.info("come into EndecaHtmlParser getParse");
        logger.info("come into HTMLMetatagFilter");
        //update the content with the main text in html page
        //content.setContent(HtmlExtractor.extractMainContent(content));
        parse.getData().getParseMeta().add("FILTER-HTMLMETATAG", "ACTIVE");
        ParseData parseData = parse.getData();
        if (parseData == null) return parse;
        extractText(content, parse);
        logger.info("update the content with the main text content");
        return parse;
    private void extractText(Content content, Parse parse){
        try {
            ParseData parseData = parse.getData();
            if (parseData == null) return;
             Metadata md = parseData.getParseMeta();
            ArticleTextExtractor extractor = new ArticleTextExtractor();
            String sourceHtml = new String(content.getContent());
            JResult res = extractor.extractContent(sourceHtml);
            String text = res.getText();
            md.set("Endeca_Document_Text", text);
        } catch (Exception e) {
            // TODO: handle exception
    public static void log(String msg){
        System.out.println(msg);
    public Configuration getConf() {
        return null;
    public void setConf(Configuration conf) {

but it only extracts URLs from <A> (anchor) tags. I want to be able to extract URLs from <MAP> tags as wellGee, do you think you could modify the code to check for "Map" attributes as well.
Can someone maybe point a page containing info on the HTML toolkit for me?It's called the API. Since you are using the HTMLEditorKit and an ElementIterator and an AttributeSet, I would start there.
There is no such API that says "get me all the links", so you have to do a little work on your own.
Maybe you could use a ParserCallback and every time you get a new tag you check for the "href" attribute.

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

ADF from JDeveloper 10.1.2 not compatible with iAS 9.0.1

Hi,
We developed an ADF Application with JDeveloper 10.1.2 and we use the ADF interMedia domains (e.g. oracle.ord.im.OrdDocDomain). The application runs fine in JDeveloper, but doesn't run on our iAS 9.0.4.1. We get the following exception:
java.lang.NoClassDefFoundError: oracle/sql/DatumWithConnection
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at oracle.jbo.common.java2.JDK2ClassLoader.loadClassForName(JDK2ClassLoader.java:38)
at oracle.jbo.common.JBOClass.forName(JBOClass.java:161)
at oracle.jbo.common.JBOClass.findDataClass(JBOClass.java:203)
at oracle.jbo.server.AttributeDefImpl.initFromXML(AttributeDefImpl.java:2061)
at oracle.jbo.server.AttributeDefImpl.loadFromXML(AttributeDefImpl.java:2013)
at oracle.jbo.server.EntityDefImpl.loadAttribute(EntityDefImpl.java:2815)
at oracle.jbo.server.EntityDefImpl.loadAttributes(EntityDefImpl.java:2779)
at oracle.jbo.server.EntityDefImpl.loadFromXML(EntityDefImpl.java:2362)
at oracle.jbo.server.EntityDefImpl.loadFromXML(EntityDefImpl.java:2106)
at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:514)
[...rest of stacktrace omitted ...]
The problem is that the JDBC version of the iAS 9.0.4.1 is missing the class DatumWithConnection that is indirectly referenced by the interMedia classes supplied with JDeveloper 10.1.2.
In detail, oracle.ord.im.OrdDoc uses oracle.sql.STRUCT. The inheritance hierarchy of STRUCT is different in the JDBC versions on iAS 9.0.4.1 (oracle.sql.Datum <- oracle.sql.STRUCT) and JDeveloper 10.1.2 (oracle.sql.Datum <- oracle.sql.DatumWithConnection <- oracle.sql.STRUCT). The class file of oracle.ord.im.OrdDoc (from 10.1.2. JDeveloper) was apparently compiled the new JDBC driver version since it contains a reference to oracle.sql.DatumWithConnection. And that class cannot be found if run on iAS 9.0.4.1 with its old JDBC version.
I think this is a very serious problem, since it means that ADF from JDeveloper 10.1.2 is not compatible with iAS 9.0.4.1, in contradiction to the support matrix (http://www.oracle.com/technology/products/jdev/collateral/papers/10g/as_supportmatrix.html).
Upgrading the JDBC Driver on the iAS seems to be the only clean solution for this problem (we also tried using old versions of the ordim.jar etc. but that always leads to other problems). But simply exchanging the JDBC jar-files on the server breaks the Enterprise Manager on our iAS installation.
I have two questions:
1) Is there a recommended workaround for the compatibility issue described above?
2) Is there a documented and supported way to upgrade the JDBC driver of iAS 9.0.4.1? I searched OTN and MetaLink and haven't found anything about this.
Kind Regards,
Kay
P.S. It is surprising that this problem is rarely mentioned in the OTN forums at all. The only relevant thread is on the JHeadstart Forum:
JHeadstart Deployment Issue
P.S.2
More info on what we tested:
We have thoroughly checked that the 10.1.2. ADF runtime was correctly deployed on our iAS 9.0.4.1. We installed a OC4J 9.0.4.0.0 standalone on the same linux machine as our iAS 9.0.4.1 and deployed our application on it, getting the same error (java.lang.NoClassDefFoundError: oracle/sql/DatumWithConnection) as on the iAS. Replacing the JDBC drivers of the OC4J standalone with the version that came with JDeveloper 10.1.2 solved the problem.

I don't think that mixing classes from different jar file is a good idea. Nevertheless, we tested this approach already. Adding the DatumWithConnection.class from the 10.1.0.3.0 JDBC version to the jar file of the original JDBC version (of the iAS 9.0.4.1.0) caused a java.lang.VerifyError to appear.
The DatumWithConnection class is not simply added in the newer JDBC version. It is inserted into the inheritance hierarchy of oracle.sql.STRUCT and oracle.sql.Datum. Simply providing the new class next to the old JDBC driver will not work.
To give more information about what's wrong with updating the complete JDBC driver, I justed tested it again. To update the JDBC driver I stopped the server, changed the contents of jdbc/lib, started the server. I tried it with JDBC Version 9.2.0.5 as well as 10.1.0.3.0.
In both cases, our own application works, i.e. no more NoClassDefFoundError caused by oracle.sql.DatumWithConnection.
The Enterprise Manager shows strange behaviour, however. Some features work as usual but, for example, when I click on the "Applications" tab for our OC4J instance, we just get the following error shown in the browser:
An error was encountered while loading page. Failed to initialize configuration management user session.. See base exception for details.
Root Cause: TDU
Resolution: See base exception for details.. TDU
In one of the server logs I found the following stacktrace:
java.lang.NoSuchFieldError: TDU
     at oracle.net.resolver.NavDescription.navigate(Unknown Source)
     at oracle.net.resolver.NavServiceAlias.navigate(Unknown Source)
     at oracle.net.resolver.AddrResolution.resolveAddrTree(Unknown Source)
     at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source)
     at oracle.net.ns.NSProtocol.establishConnection(Unknown Source)
     at oracle.net.ns.NSProtocol.connect(Unknown Source)
     at oracle.jdbc.ttc7.TTC7Protocol.connect(TTC7Protocol.java:1777)
     at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:215)
     at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:365)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:547)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:347)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at oracle.context.isearch.admin.users.InstanceManager.getSchemaConnection(InstanceManager.java:688)
     at test.admin__status._jspService(_admin__status.java:112)
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Kind Regards,
Kay

How can I use my log4j config file of my web project in ias?

I used log4j in my web project. So I put a config file "log4j.properties" in my project WEB-INF/classes/.
It works well in tomcat. But when I deploy it to ias parent by orabpel project, It didn't work know!
I can only see my log in "$ORACLE_HOME/opmn/logs", and some message I nedd is losed, such as the class name, line,datetime, Thread and so on.
I think the config file of my project is't work, maybe log4j use some config file of ias but me.thx
So where is the log4j config file of ias, can i modify it ?
Or how can I let my project use my config file not ias? Any one can help me, thx!

If you are wondering if/how to control the log messages coming from bpel, here is the corresponding log4j config file that it uses:
$ORACLE_HOME/bpel/domains/<DOMAIN_NAME>/config/log4j-config.xml

One iAS for two Portal DBs with the same URL

We are looking at using a single iAS install but having
two different Portal Databases at the back-end (E.g.
one for employees, the other for customers). The initial
URL would be the same.
Is this possible. Has it been tried ?
(Also see my alternate post on two iASs with the
same initial URL).

Not possible,certified or supported,anyways you cannot have two SIDs for the same DB can you?
Sam
http://www.appsdbablog.com

IAS Scalability

Similar Messages

Maybe you are looking for