IB51 IBASE create BAPI or Function module in R/3

Hi Experts,
I have requirement to create IBASE , I tried BDC recording for IB51. Since the Material and Equipment Tabular columns doesn't have insert or delete row (+/- button) . Handling tabular control became difficult using "KEYBOARD Page Down" event and it is not working in  BDC as in the actual transaction run.
Is there any BAPI / Function Module / Class Method to create Ibase with Material and Equipment details in r/3 ECC 6.0
Thanks,
Murali

Hi Murali,
I am having the same problem. Did you solve problem while creating/changing IBASE? :-). IBSD_CREATE_IBASE, IB_COM_CREATE_IBASE_INITIAL function modules are not released by SAP.
Can please provide the solution to create IBASE?
Thanks,
Naveen Kumar CH

Similar Messages

  • To create bapi?(function module for bapi i.e. checks and update table)

    Hi all,
      I want to know how to create BAPI?. means in function module how i hv to put checks and how i will update database table.
    thanks and regards
    sg

    BAPI STEP BY STEP PROCEDURE: -
    http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
    BAPI Programming guide: -
    http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
    BAPI user guide: -
    http://help.sap.com/saphelp_46c/helpdata/en/7e/5e115e4a1611d1894c0000e829fbbd/frameset.htm
    Example:-
    http://www.erpgenie.com/abap/bapi/example.htm
    list of all bapis
    http://www.planetsap.com/LIST_ALL_BAPIs.htm

  • Is there a BAPI or Function module can create a Customer Master record?

    Hi experts,
    In SE37, Is there a BAPI or Function module can create a Customer Master record?
    Regards

    BAPI_CUSTOMER_CREATEFROMDATA1
    also see this thread.
    Re: Create customer record  in SAP via BAPI
    кu03B1ятu03B9к

  • BAPI or Function Module or Other (not bdc) to Create Pick Doc on Delivery?

    How can I create a Picking document  for a delivery (already created) with a Function Module or BAPI (trying to avoid BDC)?
    Like when you go into a delivery and add picking qtys, then go to Document flow, you see a new docno for the pick qty you just added.
    I've written logic that updates picking qtys and other stuff on Deliveries using SD_DELIVERY_UPDATE_PICKING_1 and using BAPI_OUTB_DELIVERY_CHANGE. It works well. And, it uses the preceding and subsequent docnos.
    But I have some Deliveries that do not have an additional docno (or subsequent docno). These two modules ask for preceding and subsequent docnos. So how would I do this when only a delivery is created without any subsequent docnos? Which nis why I am trying to find out how (FM or BAPI?) to create one. Unless, someone can share a better way?
        Thank-You.
    Edited by: Tom Matys on Mar 31, 2010 4:50 PM

    Hi,
    You may try the FM WS_DELIVERY_UPDATE
    Hope this may help you.
    Regards,
    Smart Varghese

  • Bapi or function module to create conter readings in service order

    hi all,
    i have used crm_service_order_create to create the service order it was very helpful . I could also create the service order with the i base component. But i need to enter the counter readings against the i base component. Is there any bapi ot function module which takes the counter id ex 1516 and saves the data in the service order. Reply at the earliest would be of great help.
    As the necessity is of high priority.
    Thanks in advance.
    Mithun Seshadri.

    Hi
    I need ur help.please send ur sample code for create a service order using Fm or BAPI
    Regards
    P.Prabhakaran

  • Bapi or function module to create a sales order in CRM 5.1 system

    Hi experts,
    Anyone knows any Bapi or function module to create a Sales order in CRM 5.1 system directly.
    Thanks.
    regards.
    Ruchi.

    hi ruchi,
    sory for the late respond, got a lot works to be done.
    based on my experience, you need several more information such as currency, uom for quantity, sales organization, etc.
    and honestly, i have never tried to create an order by just using 3 information ( sold to party, item, and quantity ),
    but i think it is possible because some of the information can be determined using configuration, but still some information is missing and the order that you create will have an error and you can't do next process of the order unless somebody fix / fill the information needed.
    just an idea, perhaps you need some z-tables to put your certain information needed for order creation and the information is maintained for each sold to party ( sold to party is a key of z-tables ) and each time order is created, all information will be query in this tables.
    and for this tables may be you can create an offline maintainance scenario using an adobe document. by this way, the sold to party can maintained all his/her/their information by them self.
    and by using this scenario, you can still maintain / create the order by programming ( perhaps using function module CRM_ORDER_MAINTAIN or else ).
    actually i want to implement in my company but don't have a chance becuase all has been set up and the management will think twice for implementing this scenario.
    hopes it hels
    cheers

  • BAPI or Function Module to create the Rebate Agreement

    Hi All,
    I have a requirement where I get the flat file which consists of the header and item level data. Using that I have to create the REBATE AGREEMENT. The transaction code to create the Rebate Agreement is VBO1 (Create Rebate Agreement).
    Is there any BAPI or FUNCTION MODULE available in SAP to create the Rebate Agreement. Please tell me if you know any suitable BAPI or FM.
    Thanks in advance.
    Best Regards,
    Paddu.

    Hi Paddu
    Were you able to find a BAPI or Function Module to create Rebate Agreement. We have a similar requirement where we have to create Rebate Agreements with Conditions.
    If you have found a solution do share it with us.
    Regards
    Salil

  • Are there BAPI or function modules for creating posting address ?

    Are there BAPI or function modules for creating posting address and budget address? We are currently use BDC program and T code FMBSPO_MULT (Posting address) and T code FMBSBO_MULT(budget address), but it is a very slow processing because we have thousands of funds centers.
    Your input will be appreciated!
    Regards,
    Fisher Li

    Li,
    You will have, may be more answers in the technical forum :
    https://www.sdn.sap.com/irj/sdn/collaboration
    Regards
    Valérie

  • BAPI or function module to create Budject (CJ30)

    Hi All,
       I need to create budget for a project (transaction CJ30) through BDC. As you know its critical to handle the screen
    in BDC can anyone suggest me any BAPI or function module which I use instead of BDC.
    Regards
    Jaker.

    Use function module KBPP_EXTERN_UPDATE_CO. Also take a look at [Note 625613 - Interface for overall planning and budgeting|https://service.sap.com/sap/support/notes/625613]
    Regards

  • How to create the INBOUND Function Module for INBOUND IDOCs

    Hi Friends,
    Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
    which are recieved from XI Server ?
    I am working in SAP-ISU
    Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
    We have a Standard INBOUND FUNCTION MODULE
    IDOC_INPUT_ISU_MR_UPLOAD
    which Uploads the Meter Reading Results.
    I copied the Same function Module into ZIDOC_INPUT_
    and working on it.
    Can any one suggest me, whether i am going in correct way or not.
    In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
    BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
    My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
    Can I Use the Same BAPI
    BAPI_MTRREADDOC_UPLOAD
    to Update the below fields,
    EABL-SERNR
    EABL-ZWNUMMER
    EABLG-ABLESGR
    EABL-V_ZWSTAND
    EABL-N_ZWSTAND
    EABL-ABLHINW
    EABL-ZSKIPC
    EABL-ADAT
    EABL-ATIMTATS
    EABL-ADATTATS
    EABL-ATIM
    EABL-ZMESSAGE
    EABL-ABLESER(Meter reader number)
    Kindly Suggest me,
    Thanks in Advance,
    Ganesh

    Hello Ganesh
    I think you are going completely astray with you z-function module for IDoc processing.
    If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
    EABL-SERNR => BAPIEABLU-SERIALNO
    EABL-ZWNUMMER =>REGISTER
    EABLG-ABLESGR
    EABL-V_ZWSTAND
    EABL-N_ZWSTAND
    EABL-ABLHINW
    EABL-ZSKIPC
    EABL-ADAT
    EABL-ATIMTATS => ACTUALMRTIME
    EABL-ADATTATS => ACTUALMRDATE
    EABL-ATIM
    EABL-ZMESSAGE
    EABL-ABLESER(Meter reader number)
    Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
    Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
    - BAPI_TE_EABL
    - BAPI_TE_EOSB
    Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
    Regards
      Uwe

  • Is there any BAPI or function module  to delete entries from a table (VBAK)

    Hi Everybody,
    this is my first thread in SDN...
    my problem follows...
    A report is be created that selects all sales orders created by e-Sales that are more than 20 minutes old and still have a delivery block:
    tables:
    VBAK     sales document: header data
    selection fields:
    VBAK-LIFSK      &#8800;     <BLANK>
    VBAK-ERNAM     =     userID used by e-Sales / IVE
              (EP-BATCH / EAI-BATCH)
    VBAK-ERDAT      <=     Current system Date
    VBAK-ERZET     <=     Current system Time - 20 minutes
    These orders should be deleted from SAP system.
    This report should be scheduled to run regularly every 10 minutes.
    my doubt : is ther any BAPI or Function module to delete entries from a standard table...if no what is the way to delete the enteries from a std table...
    best replies will be rewarded....
    regards
    Reddy

    Hi Vasanth ,
    thanks for your reply.
    i tried in the same manner what u mentioned.
    but how to pass only one parameter to the functionmodule..
    here in this case we have to pass only update flag as 'D'..
    i did the same it giving dump..
    An exception occurred that is explained in detail below.                          
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was      
      not caught and                                                                   
    therefore caused a runtime error.                                                 
    The reason for the exception is:                                                  
    The call to the function module "BAPI_SALESORDER_CHANGE" is incorrect:                                                                               
    In the function module interface, you can specify only                            
    fields of a specific type and length under "ORDER_HEADER_INX".                    
    Although the currently specified field                                            
    "INT_ORDER_HEADER_INX" is the correct type, its length is incorrect.              
    my pgm :
    *& Report  YNEW_ORDER_DELETION
    REPORT  ynew_order_deletion.
    TABLES:vbak.
    PARAMETERS:
         p_lifsk LIKE vbak-lifsk DEFAULT '02'.
    SELECT-OPTIONS:
       s_lifsk FOR vbak-lifsk DEFAULT '10',
        s_ernam FOR vbak-ernam,
        s_erdat FOR vbak-erdat,"DEFAULT sy-datum.
        s_erzet FOR sy-uzeit.
    *PARAMETERS:
    p_erzet LIKE sy-uzeit.
       s_erdat like vbak-erdat,
       s_erzet like vbak-erzet.
    DATA:
       BEGIN OF int_final OCCURS 0,
            w_vbeln TYPE vbak-vbeln,
       END OF int_final.
    DATA:
      int_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    DATA: int_order_header_inx LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
    DATA:
      wf_time TYPE sy-uzeit.
    INITIALIZATION.
      s_ernam-low = 'KULKARMA'.
      s_ernam-sign = 'I'.
      s_ernam-option = 'EQ'.
      APPEND s_ernam.
    s_ernam-low = 'EAI-BATCH'.
    s_ernam-sign = 'I'.
    s_ernam-option = 'EQ'.
    APPEND s_ernam.
    wf_time = sy-uzeit - 1200.
    p_erzet = sy-uzeit - 1200.
    p_erzet-low = wf_time.
    APPEND s_erzet.
      int_order_header_inx-updateflag = 'D'.
      APPEND int_order_header_inx.
    START-OF-SELECTION.
      SELECT vbeln FROM vbak
                       INTO TABLE int_final
                       WHERE lifsk EQ p_lifsk
                         AND ernam IN s_ernam
                         AND erdat IN s_erdat
                         AND erzet IN s_erzet.
      IF sy-subrc = 0.
        LOOP AT int_final.
          CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
            EXPORTING
              salesdocument         = int_final-w_vbeln
      ORDER_HEADER_IN             =
        order_header_inx            = int_order_header_inx
      SIMULATION                  =
      BEHAVE_WHEN_ERROR           = ' '
      INT_NUMBER_ASSIGNMENT       = ' '
      LOGIC_SWITCH                =
      NO_STATUS_BUF_INIT          = ' '
            TABLES
              return                      = int_return
      ORDER_ITEM_IN               =
      ORDER_ITEM_INX              =
      PARTNERS                    =
      PARTNERCHANGES              =
      PARTNERADDRESSES            =
      ORDER_CFGS_REF              =
      ORDER_CFGS_INST             =
      ORDER_CFGS_PART_OF          =
      ORDER_CFGS_VALUE            =
      ORDER_CFGS_BLOB             =
      ORDER_CFGS_VK               =
      ORDER_CFGS_REFINST          =
      SCHEDULE_LINES              =
      SCHEDULE_LINESX             =
      ORDER_TEXT                  =
      ORDER_KEYS                  =
      CONDITIONS_IN               =
      CONDITIONS_INX              =
      EXTENSIONIN                 =
        ENDLOOP.
        LOOP AT int_return.
          WRITE:/ int_return-type,
                  int_return-id,
                  int_return-number,
                  int_return-message.
        ENDLOOP.
      ENDIF.
    please help me ..its a very urgent issue to be solved...
    am waiting for ur reply...
    regards
    gangareddy

  • BAPI or Function Module to Update the Alternative Payer  (KNZA) of Customer

    Hi Experts,
    My client requirement is to update the Customer Permitted Alternative Payer during creation of BP
    Would you please let me know the any BAPI or Fictional Module available to UPDATE the u201CPermitted Alternative Payer (KNZA)u201D of Customer Master.
    iam trying  SD_CUSTOMER_MAINTAIN_ALL function module, its failed to update the  KNZA tables. please help to close the issue. 
    Thanks in Advance.
    Venkatesh M.

    Hi Ravi,
    Thanks for the quick reply.
    The Function Module, what you are given is BTE. it will not trigger when creating of contract.
    My Requirement is when creating the contract for the particular BP, we need to UPDATE the Alternative Payer of Customer.
    Here i required BAPI or Function Module to change or Update the customer master Alternative Payer (KNZA).   
    Regards,
    Venkatesh M

  • Creating Includes for Function Modules

    Hi Experts,
    Can you please let me know how to create includes for function modules.
    I came across this in a standard include program, which was generated by a function library. The includes inside this program where linked to the function modules (when I double clicked on them).
    Please let me know how to create it.
    Thanks in advance !
    Regards,
    Anand Patil.

    Hi,
    have a look at the code for better understanding
    Declaration of Workareas                                             *
      DATA: lwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create,
            lwa_data         TYPE edidd, " Work area for IDOC
            lwa_control      TYPE edidc. " Work Area for control rec
    Read the control data information of idoc.
      loop at idoc_contrl INTO lwa_control Where mestyp = lc_mbgmcr.
    Extract the data from the segments.
        LOOP AT idoc_data INTO lwa_data
        WHERE docnum = lwa_control-docnum and
              segnam = lc_item_create.
    *->> Set the tabix of the internal table
          lv_index = sy-tabix.
    Move the Material Document Item Segment data
          MOVE lwa_data-sdata TO lwa_e1bp2017_gm_item_create.
    Modify the material document item data  internal table
          PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create.
    *->> set the changed values to the IDOC SDATA
          MOVE  lwa_e1bp2017_gm_item_create TO lwa_data-sdata.
    *->> Modify the table
          MODIFY idoc_data FROM lwa_data index lv_index.
    Clear the Work areas
          CLEAR : lwa_data,
                  lwa_e1bp2017_gm_item_create.
        ENDLOOP.                                     "LOOP AT t_idoc_data
    Call the BAPI function module to create the
    appropriate Material Document
        CALL FUNCTION 'BAPI_IDOC_INPUT1'
          EXPORTING
            input_method          = input_method
            mass_processing       = mass_processing
          IMPORTING
            workflow_result       = workflow_result
            application_variable  = application_variable
            in_update_task        = in_update_task
            call_transaction_done = call_transaction_done
          TABLES
            idoc_contrl           = idoc_contrl
            idoc_data             = idoc_data
            idoc_status           = idoc_status
            return_variables      = return_variables
            serialization_info    = serialization_info
          EXCEPTIONS
            wrong_function_called = 1
            OTHERS                = 2.
        IF sy-subrc = 1.
          RAISE wrong_function_called.
        ENDIF.
      endloop.
    ENDFUNCTION.
    here when we write the statment
    PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create and double click on sub_modify_idocdata .
    it will create a include with the name "LZDTSINT052F_GPOMS_GMF01 ".
    now we can write the FORM ..END FORM In this inculde.like this.
    ***INCLUDE LZDTSINT052F_GPOMS_GMF01 .
    *&      Form  sub_modify_idocdata
    Modify the material document item data  internal table
    FORM sub_modify_idocdata
    CHANGING pwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create.
    contant declaration
      CONSTANTS: lc_261(3) TYPE c VALUE '261'.
      DATA : lv_aplzl LIKE resb-aplzl,
             lv_aufpl LIKE resb-aufpl,
             lv_subrc LIKE sy-subrc,
             lv_charg LIKE resb-charg,
             lv_uom LIKE pwa_e1bp2017_gm_item_create-entry_uom.
      CLEAR: pwa_e1bp2017_gm_item_create-reserv_no,
             pwa_e1bp2017_gm_item_create-res_item.
    *->> Get SAP storage bin & Storage type from the Z table
      SELECT lgtyp lgpla
        INTO (pwa_e1bp2017_gm_item_create-stge_type,
              pwa_e1bp2017_gm_item_create-stge_bin)
         UP TO 1 ROWS
        FROM zdtsint050_sttyp
         WHERE zstorage_typ = pwa_e1bp2017_gm_item_create-stge_type
          AND  zstorage_bin = pwa_e1bp2017_gm_item_create-stge_bin.
      ENDSELECT.
      IF sy-subrc NE 0.
        CLEAR: pwa_e1bp2017_gm_item_create-stge_type,
               pwa_e1bp2017_gm_item_create-stge_bin.
      ENDIF.
      PERFORM get_oper CHANGING pwa_e1bp2017_gm_item_create.
    Get the Reservation number and Reservation item number
    basing on the idoc data.
      SELECT rspos werks lgort
             INTO (pwa_e1bp2017_gm_item_create-res_item,
                  pwa_e1bp2017_gm_item_create-plant,
                     pwa_e1bp2017_gm_item_create-stge_loc)
             FROM resb
             UP TO 1 ROWS
             WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
             AND   matnr = pwa_e1bp2017_gm_item_create-material
             AND   charg = pwa_e1bp2017_gm_item_create-batch
             AND   aufnr = pwa_e1bp2017_gm_item_create-orderid
             AND   vornr = pwa_e1bp2017_gm_item_create-activity
             AND   bwart = lc_261.
      ENDSELECT.
      IF sy-subrc <> 0.
    Start of insertion for R31K993797
        CLEAR lv_charg.
        SELECT rspos werks lgort
             INTO (pwa_e1bp2017_gm_item_create-res_item,
                  pwa_e1bp2017_gm_item_create-plant,
                     pwa_e1bp2017_gm_item_create-stge_loc)
             FROM resb
             UP TO 1 ROWS
             WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
             AND   matnr = pwa_e1bp2017_gm_item_create-material
             AND   charg = lv_charg
             AND   aufnr = pwa_e1bp2017_gm_item_create-orderid
             AND   vornr = pwa_e1bp2017_gm_item_create-activity
             AND   ( splkz = 'X' or
                     splkz = space )
             AND   bwart = lc_261.
        ENDSELECT.
        IF sy-subrc <> 0.
    End of insertion for R31K993797
          SELECT SINGLE werks lgort
                INTO (pwa_e1bp2017_gm_item_create-plant,
                       pwa_e1bp2017_gm_item_create-stge_loc)
                FROM resb
                WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no.
          CLEAR : pwa_e1bp2017_gm_item_create-reserv_no,
                  pwa_e1bp2017_gm_item_create-res_item.
        ENDIF.
      ENDIF.
    get SAP UOM
      SELECT SINGLE zsap_uom
                    INTO lv_uom
                    FROM zca_uom_conv
                    WHERE zext_uom = pwa_e1bp2017_gm_item_create-entry_uom.
      IF sy-subrc = 0.
        pwa_e1bp2017_gm_item_create-entry_uom = lv_uom.
      ENDIF.
    ENDFORM.                    " sub_modify_idocdata
    *&      Form  get_oper
         Get the operation
         <--P_PWA_E1BP2017_GM_ITEM_CREATE_RE  Segment
    FORM get_oper  CHANGING p_pwa_e1bp2017_gm_item_create TYPE
                   e1bp2017_gm_item_create.
      DATA : l_aufpl LIKE afko-aufpl,
             l_aplzl LIKE afvc-aplzl.
      REFRESH : i_op.
      UNPACK p_pwa_e1bp2017_gm_item_create-orderid TO
             p_pwa_e1bp2017_gm_item_create-orderid.
    Get the reservation and routing number for the order
      SELECT SINGLE
             rsnum
             aufpl
             FROM afko
             INTO (p_pwa_e1bp2017_gm_item_create-reserv_no,
                   l_aufpl)
             WHERE aufnr = p_pwa_e1bp2017_gm_item_create-orderid.
      IF sy-subrc = 0.
        CALL FUNCTION 'CONVERSION_EXIT_NUMCV_INPUT'
          EXPORTING
            input  = p_pwa_e1bp2017_gm_item_create-activity
          IMPORTING
            output = p_pwa_e1bp2017_gm_item_create-activity.
      ENDIF.
    ENDFORM.                    " get_oper
    Regards,
    nagaraj

  • BAPI or Function Module interface from XSD definition

    Given an XSD file, is there any way to automatically generate a BAPI or Function Module interface from it?
    BR,
    Tony.

    Hi,
    There are two approaches to create interfaces in XI
    - Outside-In - interfaces definitions are stored in XI as e.g. xsd  and PROXY classes/interfaces are generated in business system
    - Inside-Out - interfaces are developed in business system and imported into XI e.g. IDocs, BAPIs, RFMs
    So it is NOT possible to generate BAPI or FM based on XSD definition, but you can generate proxy.
    Regards,
    Jakub

  • Noob help with creating a new function module

    Hi everyone,
    I'm just learning SAP and trying to integrate a WMS system towards it and I'm losing hair over it hehehe
    The scenario is that I want to extract Purchase Order Rows details and that's not a hard thing to do since there are multiple BAPIs that can be invoked, for example BAPI_PO_GETDETAIL.
    I'm using .NET Connector 3 to talk to SAP.
    The problem however is that I want to see how many articles that have already been delivered into the warehouse using BAPI_GOODSMVT_CREATE. There is no information returned when using BAPI_PO_GETDETAIL that specifies that a Purchase Order Row has a quantity of 30 and that 20 has already been delivered.
    That information can be retrieved by using BAPI_GOODSMVT_GETITEMS.
    The problem with using BAPI_GOODSMVT_GETITEMS is that it returns all of the rows and I am only interrested in retrieveing the rows with quantity for a specific purchase order.
    So i decided to create my own BAPI or Function Module (or whatever it's called) that would take a PO_NUMBER and PO_ITEM and return the quantity of already delivered items. For example if one of the PO Rows (10) has 100 items and there has been 2 partial deliveries of 20 and 30. The function should return the value of 50 because it's the sum of 20 and 30.
    My code looks like this:
    FUNCTION ZBAPI_GOODSMVT_GETITEMS.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(PO_NUMBER) TYPE  BSTNR
    *"     VALUE(PO_ITEM) TYPE  EBELP
    *"  EXPORTING
    *"     REFERENCE(ENTRY_QNT) TYPE  ERFMG
    SELECT SUM( MENGE ) INTO ENTRY_QNT FROM MSEG
      WHERE
      EBELN = PO_NUMBER AND
      EBELP = PO_ITEM.
    ENDFUNCTION.
    The problem is that when i try to Activate it it says:
    REPORT/PROGRAM statement missing, or program type is INCLUDE.          
    What am i missing? Is there an easier way to extract already delivered quantities when extracting PO information?

    A document was produced for Designer 7.1 and the principles still apply.
    http://partners.adobe.com/public/developer/en/pdf/lc_designer_perf_guidelines.pdf
    You can poke around here as well....
    http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm
    Steve

Maybe you are looking for