ICal print menu will not come up

I have been trying to print my iCal calendar from my PowerBook G4, but the print menu will not come up. I have printed it from here before, so where did the print menu go? Help!

We have exactly the same problem here:
OS 10.4.3, iCal 2.0.3, HP Photosmart 2610
- Printing on any app works fine, ecept iCal
- in iCal choosing the command "print..." just does nothing.
I tried:
- creating a new user - > printing in iCal works fine!
so I tried:
- trashing ...
... all ical-plists in "user/Library/Preferences/"
... the folder "user/Library/Application Support/iCal"
... moving all user-pref files out of the preferences folder
... disabling all the fonts in "users/Library/Fonts/" and "hd/Library/Fonts"
no way the get it back to print!
I'm sure it has nothing to do with the HP printer, cause on a different account it works.
Any ideas what else I could disable?
Thanks for ideas
Thierry

Similar Messages

Printer now will not come out of sleep mode with new MiFi 5510L

I have a HP 3522 All In One wireless printer networked via my MiFI router that goes into sleep mode as it is supposed to after a set period of idle time but the only way I can get it back on line/wake up is to unplug it and plug it back in. While asleep, none of the buttons work and all print jobs fail because the 'printer cannot be found'. I never had this problem until I upgraded from an older MiFi unit to the 5510L.
I am using a MacBook Pro and MacBook Air both running OS X Mavericks 10.9.1
Any ideas?
Thanks,
Dave

KSutherland, I'm so sorry this is occurring with your phone. I understand how frustrating this can be when you're trying to use your phone and have to pull the battery. I researched information about your phone that have been reported by customers and didn't find this as a known issue. I also show the Bionic received a software update on December 9, 2011. I recommend updating your phone to the new software, which can assist with. I listed a link below with information and instructions for the update.
http://support.verizonwireless.com/system_update/droid_bionic.html
Additionally, I would also like to recommend clearing the cache and browser history. This can help the device from having slow functionalities. The steps are below:
From a Home screen, select the App menu (located in the lower right).
Select Browser.
If the application icon is missing, select App menu filter (located at the top) then select All apps.
Select Menu.
Select More.
Select Settings.
Within settings you can clear the following :
--Clear all, which clears all deletes history, cache, cookies, form data and passwords
--Clear cache, which clears visited website content stored on the device. The cache enables the browser to download only the content that has changed since the last time a website was visited. Since the browser only downloads changed content, pages are loaded faster.
--Clear history, which clears a listing of URLs (website addresses) that have been recently visited.
--Clear cookie data, which clears some cookies contain customized preference and logon information for previously visited websites. Once deleted, the website may prompt for this information again.
Pleas let us know if the above steps work for you.
Have a good day.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Printer offline will not come online

I have an HP 2035N printer connected via LAN to an office network. It has worked for over a year and suddenly changed to "offline" mode. I am unable to communicate with it via the HP diagnostic tool. I have typed in the IP address to see if that solves the issue but it does not. How do I get the printer to come online?

Hi.
Please disconnect the PC from the wireless network and reconnect it to ensure the PC didn't wrongly connected to a different open network in your area.
If that does not help please let me know what Anti Virus and Firewall programs you may have installed on your PC.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Print Window will not show - freezes whole application

I have a mac mini running tiger which will not print in ANY application. When I click file>print, the print window will not come out and the application freezes, and I have to force quit it. This happens in every application when I try to print.
Other macs connected to the same printer will print successfully, but the mac mini will not. Any ideas or suggestions? Thanks!

Great news!
but I skipped the last step (repair permissions after booting from the HD), because I did that step when I booted from the CD's disc utility
Well, DU picks up what the Permissions are from the Disk it's booted from, so though doing it from the Install DVD might get most right, it really needs to be done from the HD.
PS. Depending on the version of 10.4 on the Install Disk, it MAY read them from the HD's Library>Receipts>PKGs, but it's never been cleared up as to what version that might be.
Might let us know if some Permissions were changed if you decide to do it from the HD.

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

My p6320y will not come on. The power light comes on but thats all

my p6320y will not come on. The power light comes on but thats all. Is it the CPU or motherboard? Whichever it is what do you recommend to replace it with

Can you get into the BIOS? Do the HD and DVD drive show up in the main menu?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

HP LaserJet P3005x will not come out of sleep mode

Printer will not come out of sleep mode (after being in sleep mode for an extended period of time (over 24 hrs)). When this happens, I can not ping the printer and pressing any of the buttons on the printer will not bring it out of sleep mode. I'm testing now to see if I can recreate this with the printer attached to my PC via USB.

Hi arosecarter,
I understand your monitor is not coming out of sleep mode. Take a look at the following support document, Resolving Problems with Sleep and Hibernate Modes (Windows 7). Step 3 might be of particular interest to you, as you mentioned your keyboard and mouse are not really working for you either. Perhaps it is another connected device that is causing the issue? Anyway, hopefully this document will be of help to you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any

Ooops I put the lot in the strap line!
My printer crashed mid printing photo. Printer works OK in other apps. Now locked out in PhotoshopCC with error message: There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
I would be grateful for help!! Obviously...

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I am getting the message, "There was an error opening your printer. Printing functions will not be a

I am getting the message, "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." There was no problem two days ago. I have Photoshop CC.

Platform, Mac or Win? OS? What printer? Printer driver version?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT202118 my 3rd generation apple tv will not come on just a white flashing light my first generation one is working fine? tried unplugging it nothing, any help is much appreciated.

my 3rd Generation Apple TV will not come just a white flashing light i tried unplugging it for 30 seconds nothing tried the menu button and down arrow that did help as well and suggestion? Thank you I'm not very tech savvy.

Click on the blue link I gave. You would need to hook it to a computer running iTunes using a microUSB lead.
If you have an Apple Store nearby take it there and see if they can sort it out.
It is possible the display resolution is wrong - you could try holding menu and up arrow on remote together for 6 seconds which will make it cycle display resolutions - but only if it is actually working but showing a black screen due to wrong resolution selected.

Airport CD will not come out

I have been trying to eject the AirPort Extreme Disc and it will not come out. I have tried several ways, iTunes, the eject botton on the keyboard, the file menu. When I try to eject it make a little noise and the then the disc disappears off the desktop but it is not ejected. I then have to restart to get it to appear again.
suggestions?
Thanks,
1.25 Power PC DP G4 Mac OS X (10.4.7) many macs

ebhome, Welcome to the discussion area!
Check out the suggestions in KB 88215, Power Mac G4: How to Eject a Disc From the DVD or CD Drive.

ICal print menu will not come up

Similar Messages

Maybe you are looking for