Icon corruption in InDesign CC using PlatformIconClass

I'm porting an InDesign plugin from mac to windows. It supports InDesign CS5.5 through to CC2014.
I'm displaying a PNG image using PlatformIconClass with the code:
PlatformIconClass theIcon;
theIcon.LoadIcon(myPluginID, myRsrcID);
PMRect frame = GetFrame();
frame.MoveTo(0, 0);
ContentToWindowTransform(&frame);
theIcon.Draw(viewPort, ToSys(frame), kFalse);
The RsrcId is for a PNG specified in the fr file with PNGA etc as standard.
In CS5.5 and CS6, it displays fine. However CC shows image corruption (see screengrab - left is 5.5, right CC). Any ideas on what's causing this and how to fix?
Thanks
Liz

I am having the same issue. Also, the option/drag to duplicate an item is not working.

Similar Messages

A weird 'person sitting at a laptop ' icon pops up suspending the use of my Mac. I see a countdown for 3 minutes and a line of letters to type in to allow me to continue working. I have 2 minutes to work. Help. What is this!

A weird 'person sitting at a laptop ' icon pops up suspending the use of my Mac. I see a countdown for 3 minutes and a line of letters to type in to allow me to continue working. I have 2 minutes to work. Help. What is this!

Hate to say it. I isolated this to only be happening with email/Mail program. Then ran Sophos Virus detector on it and it did show a trojan virus in my email spam folder. I eliminated it ; ran disk utility a couple of times and I am good now. Spent the whole day on it though before I thought of using a virus scan... as soon as I started running sophos it stopped sending me the two minute timer as well--so just opening the virus software was able to disengage whatever was happening. My computer is all mac --no PC interface added at all. Hope that was that. Thank you for responding.

After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
Bob

On the right of the To: field you will see a circled plus sign:
Click it.

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!

That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.

Move group of pages from one InDesign file to another InDesign File using VB.Script

Dear team,
I am trying to move group of InDesign pages from one indesign file to another indesign file using vb.script.
I have written the code like
Dim Pages=IndDoc.Pages
Dim Mytype=TypeName(Pages)
Pages.Move(InDesign.idLocationOptions.idBefore,IndDoc1.Pages.LastItem)
but it is giving an error as method Move is not a member of Pages
please give mme the solution to move the Multiple pages or a group of page from one Indd to another Indd.

Hey Peter, if I wan to move several page that part of Auto Flow text, I checked the "delete page after moving" but the content still there, not deleted.
Is there any way to delete it automatically, just to make sure I have moved that autoflowed page?

[IDCS2]How to move the Snippet in a folder inside the Indesign Document Using Script?

Hi
How should i move all the snippet objects in a folder in to an Indesign Document using Javscript?
Thanks
myriaz

Once you have the snippet in your document, how do you move it/select it? My snippet is a text frame with a table in it.
This does NOT work:
var myFoot = myDocument.pages.item(0).place("Hard Drive:Users:Casey:Desktop:footer.INDS")
myFoot = myFoot[0]
myFoot.geometricBounds = ["1", "1", "1", "1"]
The snippet gets placed, but my error says "Object does not support the property or method 'geometricBounds'. This code works for normal images I place.
JS - Mac - CS3
Casey

Error 1335 the cabinet file data4.cab is corrupt and cannot be used, what do i have to do

error 1335 teh cabinet file data4.cab is corrupt and cannot be used, what do i have to do

Hi Max210662,
Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .
Regards,
Romit Sinha

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

TS4268 Please help, I can't find face time and Siri icon on my mini ipad? Just bought it I have the IMessage icon and is able to use it.

Please help, I can't find face time and Siri icon on my mini ipad? Just bought it I have the IMessage icon and is able to use it.

There is no Siri "icon". You access Siri using the Home button. But you may need to turn it on: Settings App > General > Siri. http://support.apple.com/kb/HT4992
Same for the FaceTime function (but if it is ON, there will be an icon): Settings App > FaceTime > [turn it on and set you Apple ID. http://support.apple.com/kb/HT4319

Hello , im working with hebrew and the dot "." isnt correcting to right with the align , i know that in indesign u use with paragraph direction to correct it but here what should i do. sorry for my english

hello , im working with hebrew and the dot "." isnt correcting to right with the align , i know that in indesign u use with paragraph direction to correct it but here what should i do. sorry for my english

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Clicking on Dock icon only brings most-recently-used window to front

In Leopard, clicking on the iChat Dock icon would bring all iChat windows (contact lists, chats, etc.) in front of other open applications, and give focus to the most recently used iChat window.
After installing Snow Leopard, clicking on the iChat Dock icon only brings the most recently used iChat window to the front and gives it focus -- other iChat windows remain behind other application windows (if that is where they were before).
Is this just me? My friend tells me that it still behaves like it did in Leopard on his computer. Any ideas?

In the First Post your Specs said Snow Leopard, now they say Tiger
Sorry, I didn't realize it wouldn't remember that setting for me -- I am running Snow Leopard.
With Chax in Leopard/iChat 4 an extra item was added to the Window menu of iChat that says "Always On top"
No, this is not what I was looking for. I have another machine with Leopard, and it does not have Chax -- iChat windows are not always in front, but they all come to the front when clicking on the Dock icon.
I don't use it on the Buddy List as you can set it on Any iChat window.
What do you mean, "you can set it on Any iChat window"? You mean the Chax setting, or something else?
Are any Minimised to the DOCK ?
No, none are minimized to the Dock.
Chax does not work in iChat 5 and may be the cause of the issue.
There is a beta version of Chax for iChat 5.
I would delete Chax and then the com.apple.ichat.plist to remove any thing in it that refers to Chax and then relaunch iChat.
I deleted Chax and every Chax and iChat plist, then restarted my computer. The problem did not go away -- still, only one window comes to the front when I click on the iChat Dock icon -- the others stay behind other windows.

I cannot able to save indesign document using sdk?

hi,
i opened a indesign template using sdklayouthelper file and then update the text content in the template.After that i try to save(using sdklayouthelper file saveDocumentAs method) but i could not able to save a document as xxx.indd.
pls,anyone give me the guidelines for save a document?
thanks,
screen410099.

Please don't post the same question multiple times; someone will get to your post when they know the answer.

Getting errors while updating links in Indesign document using javascript

Hi,
We are updating the links in InDesign document using javascript. After running the script, we are getting the below errors in Adobe InDesign CC debug.
When closing the document for first time we are getting the below mentioned errors,
ASSERT 'fRefCount == 0' in c:\development\citius\source\components\database3\revisioneddatabase\SaLRICache.tpp at line 230 failed.
Erased item list not empty at block delete time
blockUID = 10486786 not freed
Internal error: 904 items were leaked!
After that we are opening the same document for second time, then we are getting the below mentioned errors,
ASSERT 'ts_DBPubFile->PlacementUIDIsAvailable(uid)' in c:\development\citius\source\components\database3\revisioneddatabase\SaLRIUtils.tpp at line 195 failed.
DB failed to create UID!
ASSERT 'this->FindInIDRangeList(fLastCreatedBlockUID) >= 0' in c:\development\citius\source\components\database3\revisioneddatabase\SaLRICache.tpp at line 476 failed.
ASSERT 'fLastCreatedBlockUID != kInvalidUID && fLastCreatedItemID != 0' in c:\development\citius\source\components\database3\revisioneddatabase\SaLRICache.tpp at line 467 failed.
ASSERT '(SaLRIUtils<SnapshotID , SnapshotInfo>::ts_DB)->IsValidUID(itemUID)' in ..\..\..\source\components\database3\revisioneddatabase\SnapshotCache.cpp at line 55 failed.
Please help us to solve this error in InDesign debug.
Thanks,
Vimala L

You're probably better off raising this in the SDK forum.

Can I download Indesign CS6 using my CC membership?

can I download Indesign CS6 using my CC membership?

Hi Amy,
Yes it is possible, please see this link Creative Cloud Help | Install, update, or uninstall apps to download previous version using Adobe CC desktop application.
Also, please make sure that your computer is compatible to use CS6.
-Ankit

Icon corruption in InDesign CC using PlatformIconClass

Similar Messages

Maybe you are looking for