Iconic buttons in design time ... Is there any way to take their icons from the jar or at least from gif files?

I've put my button icons in a signed gif, and they work fine at runtime.
The problem is at design time, I can't get to see their icons properly.
I have to convert the gifs to ico and place them in a folder referenced by the old UI_ICON registry variable.
Also, as the gifs are 16x16, they are cropped in design time, because I see them as if they where stretched to 32x32 size.
At least it would be enough if I could place the gifs directly somewhere, without converting to ico.
It seems as if oracle had not put any development work in the builder, which is like a direct port from the 6i c/s version.

Since you didn't mention exactly which Forms version you are using, I will guess and assume it is one of the many versions after 6.0.8. The Forms Builder 9.x+ supports ico, jpg, and gif files. It will not however read them from a jar. Therefore, you will need to extract them into a directory as defined by UI_ICON. Also, the files will need to be of the same type (gif, jpg, ico). Mixing formats is not recommended or supported. The format you choose can be defined in UI_ICON_EXTENSION
So for example in your Registry you might have something like this:
UI_ICON = C:\myImagesDirectory
UI_ICON_EXTENSION = gif
Since "gif" is the default, you do not need to set this if using "gif" files.

Similar Messages

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled. As most of these are classical, it is inappropriate to have them separated into songs that play any old time. Can I restore them to the original albums?

Is there any way of undoing a shuffle? The CDs I downloaded to iTunes have all been shuffled into individual 'songs'. As most of these are classical and folk, it is inappropriate to have them separated into songs that play any old time (ie, a movement from Beethoven's 5th symphony followed by a folk song followed by one excerpt from Vivaldi's Four Seasons, etc. Can I restore them all to the original albums and make sure the shuffle doesn't happen again?
Thanks!

goldberry wrote:
Thanks! That has worked, but only partially - there are still some Beethovens mixed in with the Vivaldis. I'm sure I installed these as total albums.
I have noticed that too from time to time, I generally move the files into the correct folder and fix the index in itunes when one won't open, occasionally.

Is there any way I can get rid of the noise my iPod makes when I plug it in to charge without turning the volume of the whole IPod (4th Generation) down?

I have a 4th generation IPod touch. Today I downloaded the new iOS 6.0.1 and I have a question. Is there any way I can get rid of the noise when I plug it in to charge? I had it set that way before, and I can't seem to figure out how I did it. I found when I turned down the over all volume it gets rid of it, but I don't want to change the over all volume. Thanks so much for you help and Happy Holidays.

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in but not make purchases from the store so I set up a new login/account . Is there any way to move my music to the new account?

My itunes account was disabled for some reason. I changed password in iforgot and still didn't work. I could log in and see my music but not make purchases from the store or even redeem an itunes gift card so I set up a new login/account with another email account of mine. On the new account I can redeem my gift card and download items onto my ipad2. Is there any way to move my music to the new account?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

Is there any ways to stop Quicktime player from occupying audio hardware?

Hi, my PC system is Window XP Pro SP2, HP xw8400 Workstation w/ 2G Ram. And the PC has a Digidesign Pro Tools HD 1 audio system installed.
My problem is that after Quicktime player lauches, it will occupy the Pro Tools HD's hardware. And if I want to start Pro Tools software, "digidesign hardware is in use by another application." warning will occur and Pro Tools software will then quit. BTW, Digidesign's audio driver is not multi-clients compatible.
I have set Quicktime player's audio playback device to PC motherboard's audio device, and system's audio device is also motherboard's audio device, I even have checked the "use default device only" option. I can't understand why Quicktime player still occupies Digidesign's hardware, even it plays back audio through motherboard's audio device.
Though I can quite Quicktime player before lauching Pro Tools software, I still feel it's annoying and inconvenient, and want to know some ways to solve this problem.
Anyone can help? Thanks in advance. I have asked for help in Digidesign's offcial forum, no response.
BTW, the Quicktime player version on my system is 7.6.5, and each time Quicktime player launches, the sample rate led on the Digidesign's audio interface will flash, indicating that QT player is accessing Digidesign's hardware.
Message was edited by: compusic
Message was edited by: compusic

Victor.jacob wrote:
I have a Blue Ant Q2 Bluetooth headset. When it's paired, is there any way to stop all audio from streaming to it? I want to hear the iPad "ring" so I don't have to have the earpiece in my ear all day, or be able to play audio through the speakers instead of the earpiece. I feel like I'm missing something simple.
You are missing something simple but lets get it to stop as you want. Go to Settings/General/Bluetooth turn it off.

Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

Tell me please, is there any way to unlock my iPhone, if the contract is ended and I moved to Ukraine

1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
2. If that doesn't solve the issue, backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

I have an old MacBook (Mac OSX 10.5.8) with iPhoto '08. Is there any way to back up not only the photos, but the way I have organized them into events and labeled them?

Yes. Back up the Library.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Is there any way to use flash without all the bloated code?

I want to put a flash player on my site, however with dreamweaver the "insert movie" option puts a ton code in my markup to the point where i cant even tell what im looking at. Is there any way to use flash without all the bloat?

Yes and no. Some bloat as you call it is necessary to support all browsers. That said, this on-line tool takes your Flash code and converts it to valid XHTML Strict standards. In the process, the code is minimized a bit. Be sure to test in an XHTML Strict doc type page.
http://www.validifier.com/
Nancy O.
Alt-Web Design & A
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Is there any way to execute process chain from the portal?

Hello,
Is there any way to execute process chain from the portal? I dont want to link process chain with any of report. I want to have a button in some of portal folders. User presses the button and it executes the process chain.
I was thinking about to create a fake planning cube, aggregation level and planning function. I call FM within the Fox planning function that runs the process chain. But it should be done within the report.
Any ideas?
Thanks a lot in advance!

Hi.
I want to have a button in some of portal folders
You mean that you want to use some link in EP ?
Regards.

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

Technical issues aside, there's still a legal issue.
Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

Is there any way to access my contacts from a non apple device?

Is there any way to access my contacts from a non apple device?
I am waiting on my new phone to arrive but in the mean time can I access my contacts from a non apple device? Please help!

If you synced them to iCloud, you can view them on icloud.com from your computer. They can also be accessed from an Android device using SmoothSync for Cloud Contacts. Or, you can download them from iCloud as a vCard (see http://support.apple.com/kb/PH3606), then import them to another service such as Google in order to sync them with a non-Apple device.

Is there any way to sync 20 iPads to the same account and keep their folders?

Is there any way to sync 20 iPads to the same account and keep their folders?

We have 2200 student iPads on our school campus. When starting from scratch they all receive one identical image and then are renamed according to their property tag (manually ). Students are then checked out their device for the school year and often move their apps around into folders. I often have some come back in to be synced, updated, etc. and I do mid-year updates to apps. As long as their names are unique I have no issues with them retaining folders when they are resented late. So basically as long as you don't mind doing the set up to each one of the 20 the first time you sync them, you can update them whenever you'd like, adding and updating apps, and you can retain folders.
And of course there are all sorts of other options with Configurator and other MDMs.

Is there any way to remove profile names on the itunes wifisync for iphone4?

is there any way to remove profile names on the itunes wifisync for iphone4?

selenafrommelbourne wrote:
a little dumb at times so please forgive me
do u mean the better halfs phone ... restore his phone on itunes and then set up a new account for him
since that (plus one other minor incident) has happened he will not let me touch his phone, so if i can be detailed from experienced people, then he may feel confident and let me do this
sounds like a nice guy! if he won't let you touch his phone this may work out better for you...tell him to handle the problem himself.

Iconic buttons in design time ... Is there any way to take their icons from the jar or at least from gif files?

Similar Messages

Maybe you are looking for