ICWC: Getting messages from application log
HI there,
I'm trying to retrieve messages from the SAP GUI application log. Right now, the standard views do get the messages, but I have introduced a new viewset and view. These new viewsets and views do not seem to display the error messages.
Any help is much appreciated.
Cheers,
J
Hi Joshua,
Application log messages do not appear by default in ICWC. Application developers have to add the appropriate messages in the global message container either in the GENIL implementation (where standard APIs are called) or in the UI of your custom-built views, wherever convenient.
I hope this has given you some hints.
Regards,
Sudipta.
Similar Messages
-
Dealing with a 4rd party application that inserts into its log table, but watching sql profiler i see a ton of the same traffic. Its trying to insert into the table, but generates an error that mentions the transaction log for that DB is full.
Well, earlier I had reset the recovery mode to simple, from full since this is a test system and dont really care about recovery.
So the message mentions to check the log_reuse_wait_desc column in sys.databases and there the value is 'CHECKPOINT'. At least at that point in time.
There is plenty of space in the transaction log and the physical disk has plenty of space as well.
What could be causing the error that seems to suggest the transaction log is full, when in fact it is not?What is the setup for autogrowth on the log file?
Transaction log shrink:
http://www.sqlusa.com/bestpractices2005/shrinklog/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Displaying error messages from application log
Hi,
I am using the function module RV_DELIVERY_CREATE for creating delivery in my program. If the sy-subrc is not zero i.e if delivery is not created, i have to display error messages collected inside the application.How can i do this ?
The object nd subobject are existing in SLG0 but when i
tried to see the object and subobject in SLG1 transaction , no logs were found.
Do we need to activate the object and sunobject somewhere before logging can take place??
I am using the following code in my program to display the logs but it is displaying no logs found:
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
EXPORTING
object = 'ZCH_SCL'
subobject = 'DL'
LOG_HANDLE = ' '
NO_LOG = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'APPL_LOG_INIT'
EXPORTING
OBJECT = 'ZCH_SCL'
SUBOBJECT = 'DL'
LOG_HANDLE = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM z_call_rv_delivery_create. " to call fm rv_delivery_create
IF sy-subrc ne 0.
CALL FUNCTION 'APPL_LOG_DISPLAY_INTERN'
EXPORTING
object = 'ZCH_SCL'
subobject = 'DL'
title_list_screen = 'Error Logs'
COLUMN_SELECTION = '11112221122 '
COLUMN_SELECTION_MSG_JUMP = '1'
EXTERNAL_NUMBER_DISPLAY_LENGTH = 20
I_S_DISPLAY_PROFILE =
IMPORTING
NUMBER_OF_PROTOCOLS =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3
thanks,
vartikaHi Vartika,
you need to save that log after creating and appending to it.
here is a code to save that log.
If log created, save to database
if e_bal_hndl is not initial.
refresh: bal_hndl.
append e_bal_hndl to bal_hndl.
call function 'BAL_DB_SAVE'
exporting
i_client = sy-mandt
i_in_update_task = 'X'
i_t_log_handle = bal_hndl
importing
e_new_lognumbers = log_no
exceptions
log_not_found = 1
save_not_allowed = 2
numbering_error = 3
others = 4.
u have to write this code after appending info to Log.
hope this will help.
regards,
vikas -
Just updated to new version of pages. Now can not open stored documents created under al pages. Get message "the application pages can' be opened -1712" hat do I do?
Apple released Pages 5.0 to run on Maverics only. They completely rewrote the program for Maverics and 64 bit compatibility. They failed to explain that this version is missing much of the previous version's capability and that it cannot read older Pages files. When they install it they leave the older Pages 4.3 in place because it is the only way to read the older Pages files and upgrade them to a level that can be read by Pages 5!
If you still have Pages 4.3 on your computer it will tell you what to do. If you do not then go into your backups and retrieve it.
Because of the deficiences of Pages 5 I have removed it from my Mac and gone back to working with Pages 4.3. I have also removed Pages 2 from my iPad and found Pages 1.7 in the Time Machinew backups and brought it forward and droped it onto the iTunes icon to restore it and then synced the iPad to get the Pages 1.7 running again - it is compatible with Pages 4.3 on the Mac so all is back to normal for me.
Apple say that they will fix many of the deficiences in Pages 5 in the next six months. I suggest you wait until then and keep an eye on these communities beforte considering the "upgrade".
Incedentaly Pages 5.0 writes files that cannot be read by anything else including Pages 4.3 - better hope no one sends you one! It does not save RTF either - what where they thinking! -
Getting message "The application CIJAutoSetupTool quit unexpectedly"
I keep getting message "The application CIJAutoSetupTool quit unexpectedly" while trying to get my new Canon PIXMA ip4600 printer to work via my D-Link DI-624S Router (which has 2 USB ports for printers).
I have a Brother Laser printer working fine but just can't get the Canon to work.
If I try to print a document, it comes up with "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error" which is not very helpful:) I'd love to eliminate the cause of the error!
It prints perfectly when connected to my iMac directly via USB cable.
The Canon (and Brother) both print from my wife's Windows XP box that is also connected to the DI-624S Router.
I'm relatively new to mac so any help would be appreciated.
ThanksThe 'CIJAutoSetupTool' is used by the system after selecting a USB connected Canon PIXMA printer. It is not something that a user can open - it is called automatically by the Canon driver software and is used to determine the model of printer being added.
I believe your error occurs due to the inability of the Canon software to correctly determine the printer when connected to the D-Link router. This is a limitation of the Canon driver, which is the same problem when you have the printer connected to a Windows computer and shared.
The solution is to use a CUPS based driver, like that offered by Gutenprint and PrintFab. Since Gutenprint is free, this would be the preferred selection. You will need v5.2.3, as this lists your model as a supported printer. You can download the software from Sourceforge (http://gimp-print.sourceforge.net/MacOSX.php).
With the Gutenprint driver installed you will need to remove the Canon driver, because when you select the USB connected printer the Canon software will try to add the printer and possibly cause the same error again. The easiest method is to browse to ./Library/Printers/Canon and delete the BJPrinters folder and then empty the trash. With the Canon software removed, you should be able to select the USB share in the default view, and then browse to the iP4600 Gutenprint driver in the Print Using menu.
PaHu -
How to get messages from IBM MQ in Oracle.
Hi ,
Can you please help me how to get messages from one IBM MQ to another IBM MQ in Oracle.
My requirement is Our upstream is putting messages from their IBM MQ to our IBM MQ
then we have to extract data from the message and load into Oracle database tables
how to implement this in oracle.
Is there any other way to implement this without writing any ORACLE PL/SQL programming.
Please help me.
Thanks.You might want to use Oracle AQ: Integrating Oracle database applications with WebSphere MQ applications You will need to write some PL/SQL to Dequeue from Oracle AQ and convert the queue payload into insert statements.
If you need help wityh AQ, there is a separate forum: Advanced Queueing -
I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss in the trash, but it is not clear to me what items I can toss and which items I can't toss. Can you help? Using the imovie "help" support the system showed me under the menu item "go" where the "start up disc" should be - but that wasn't actually available on my menu! Thanks for your help!
Disk Utility
Get Info on the icon on Desktop
Try to move this to the MacBook Pro forum
Your boot drive should be 30% free to really perform properly. 10% minimum
Backup, clone, use TimeMachine, use another drive for your projects and movies, replace and upgrade the internal drive even. -
My boyfriend and I share an apples account for a while now. I would get messages from his phone he would get mine. We would text on that ID but now it's acting up. It doesn't let him send me messages, it sends it to him twice. I use the email but he uses the #. Does anyone know what to do?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
Domain user no longer exists but getting errors in application log
Hi,
We had a domin user with which SQL service and SQL agent is configured to start. But this account does not have access to that server in which SQL is installed now. I can see the follwing message in application log:
Log Name: Application
Source: MSSQLSERVER
Date: 3/10/2014 2:00:00 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: Domain \username
Computer: XXXX
Description:
Login failed for user 'Domain \username'. Reason: Failed to open the explicitly specified database. [CLIENT: <local machine>]
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSSQLSERVER" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated SystemTime="2014-10-03T04:00:00.000000000Z" />
<EventRecordID>20420597</EventRecordID>
<Channel>Application</Channel>
<Computer>XXXXXXX</Computer>
<Security UserID="S-1-5-21-2091904384-3689332406-323980668-6522" />
</System>
<EventData>
<Data>domain\usernamer</Data>
<Data> Reason: Failed to open the explicitly specified database.</Data>
<Data> [CLIENT: <local machine>]</Data>
<Binary>184800000E000000100000004100550030003400550041005000300036003800510041004E00380032000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
How come this message is coming in the application log, since no one has tried to log in to the application?Hi Both are 2008R2 version. My doubt is I can see that login failed message in application log but how to find out which process is trying to use that login?
First observe that this is something that runs on the same machine as SQL Server. (The error message says "CLIENT: <local machine>".) That may be a clue enough.
If not, set up a includes Audit: Login Failed and no other event. Of interest are the columns ApplicationNmae and the the column ClientProcessID. ApplicationName may be sufficient, but if not you can use ClientProcessID and match this against the PIDs you
see in Task Manager or Process Explorer. There is a risk it is a short-lived process and then you will have to look at Process Explorer and Profiler in parallel.
Erland Sommarskog, SQL Server MVP, [email protected] -
I get this from system log using latest version of Firefox:
[32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000
What kind of problem is this?
Anyway Firefox seem to be working correct. I would like to be sure that it'snt a security problem.Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
Need to read messages from the log instead of displaying
Hi,
I need to read all the messages from the log with a particular log no..
i was able to display it using FM BAL_DSP_LOG_DISPLAY..But i want to collect the messages instead of displaying..To display according to my requirement..
Thanks in advanceUse this for reading :
BAL_LOG_MSG_READ
Regards
Neha -
Installed Acrobat XI but getting message from a website that I need "a later version of PDF viewer to view full contents of this document". How to fix this?
THe message is misleading. Save the file to your desktop, even though all you see is the message. Then, open the saved file in Reader.
-
Can't get messages from iphone users on my new Samsung g allaxy and don't have my old iphone anymore ! Please help !
Read here under no longer have device:
http://support.apple.com/kb/ht5661
Be aware, changing your Apple ID password doesn't always work, & can take up to 45 days to work.
It's either that, or you call AppleCare & have them fix. -
recent update of software crashed. Now hwen i try to open i tunes, i get message "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" - It has not!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99750) -
Fetching out message from transport log
Hi buddies,
I used this function to read the warning and error messaging when an error or warning occured during request transportation.
<b>TMS_UI_SHOW_TRANSPORT_LOGS</b>
my question is after I called this function,the log will display on the screen,How can I read the detail warning message from the log file?
for example:a warning message in a log file showed like this:
Data element ZDOLEAPS10 was activated with warnings
I don't want to read others message.Finished
Maybe you are looking for
-
I can't get iCloud to work. the screen says iCloud backup is off but I don't know how to turn it on, can anyone help?
-
ICloud - how to validate what is in the Cloud
I am a user of SONOS for home entertainment. SONOS leverages content in my iTunes library I recently noticed that my SONOS Library did not contain all of my iTunes library. When I asked SONOS why this might be they pointed me at the fact that some of
-
The accumulation at the aggregate level
Hi, in the web form, I entered data in the first 3 months (January, February, March) ...I recorded ... but the accumulation does not occur at the Q1. Q1 take just the values of the March.
-
Problems with sound in onEnterFrame....
how do i get a sound to play just once when its in an onEnterFrame function. i have nameOfSound.start(0,1); but when its played, its over and over and over.... whtats the correct way to do it?
-
I was wondering if I can use a Verizon iPhone 4S with AT
I was wondering if I can use a Verizon iPhone 4S with AT&T