IDEA: add a USB Standard-B connector to use any laptop as an external hard disk

Hello Lenovo,
Here is an idea for you:
Add to your laptops a USB Standard-B connector with the following functionality:
When the power of the laptop is OFF,
you can connect the laptop to another laptop using this connector,
and use the internal harddisk of the laptop as an external harddisk for the other laptop.
Regards
Bogdan

From a normal external drive, no, it's not possible. The only device that would approximate this sort of functionality that I've heard of would be the Seagate GoFlex Satellite:
http://www.seagate.com/www/en-us/products/external/external-hard-drive/goflex-sa tellite
Regards.

Similar Messages

  • External Hard disk cannot be detected by my MacBook Pro USB's

    Hi
    I have bought an external hard disk 2.5" and even though I have formatted it as FAT 32 still none of my 2 USB ports detect it. It is a hitachi drive 160 GB eSATA. I haven't use power with my external drive.
    I ended up sharing it through a toshiba notebook I have for the kids running Windows XP and I transfer files though the Toshiba to the external drive. It's outrageous!!!
    Any ideas?
    thanks
    Andreas

    Hi Andreas,
    OSX can recognize and use FAT32 partitions without additional help !
    Your problem sounds to me as a power consumption problem of the external HD, meaning that the HD does need more power from the USB port than the MacBook Pro can deliver.
    Best solution might indeed be to get the external HD on its own power supply.
    Stefan

  • How to ADD a second external Hard Disk ?

    Hi,
    I'm using an iMac 1,42 GHZ PowerPC G4 mini.
    With an external 250 GB hard disk.
    Can I ADD an extra external hard disk ?
    And HOW ?
    Thanks very much for an answer !
    John

    Welcome to the Apple discussions.
    You probably have a Mac mini, as an iMac is a different system.
    Using firewire connections, you can daisy chain drives together. So, you hook one into the mini, then hook the next into a firewire port on the external hard drive connected to the mini. If your current hard drive is connected via firewire, you should be able to add another firewire drive by plugging into your existing external hard drive.
    If you're using a USB drive, you can buy a USB hub that will allow you to connect more than one USB device.

  • How do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    how do I figure out if I have usb 3.0?  I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

    Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
    ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled. 

  • I use Time Machine with an external hard disc which has worked perfectly for some years.  Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system.  Any ideas?

    I use Time Machine with an external hard disc which has worked perfectly for some years.  Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system.  Any ideas?
    Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine.  I have to switch-off the computer and re-start in order to undertake  a back-up.  I have now switched of all screen savers.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • My external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working..

    my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.

    1.  These are the iphone forums.  So what does your question have to do with iPhones?
    2.  Contact Transcend for support.

  • USB 3.0 doesn't recognize usb 3.0 external hard disk

    Hi, I have a 500 GB WD 3.0 USB External hard disk (Elements 1042) It works fine on my two USB 2.0 ports but when I connect it to my USB 3.0 port it's not even recognized, however the USB 3.0 port works with all the others HD I have, what should I do?

    Good Morning
     The first thing that comes to mind is that there are no USB 3 host controller drivers installed on your operating System. Are the other hard drives that work in the Port USB 3 or USB 2. If they are USB 2 then I would go onto the Support page for your machine and look for USB 3 drivers and try them
    Drew

  • I3 window manger & automount external hard disk / usb drive

    Hi,
    I using arch x86_64 with 3.11.5-1-ARCH #1 SMP PREEMPT kernel + i3 window manager + pcmanfm.
    But i'm unable to automount my external hard disk or usb drive.(I have installed gvfs package as well.
    Also is there any gui tool to configure keybinding? (something like obkey in openbox)
    Please help.
    Thank you.

    epic wrote:Also is there any gui tool to configure keybinding? (something like obkey in openbox)
    I think you need to look at https://wiki.archlinux.org/index.php/I3#Volume_Manager and the output of man i3
    tl;dr - the ~/.i3/config file does it nicely.
    Here is mine:
    ewaller$@$odin ~ 1001 %cat .i3/config
    # This file has been auto-generated by i3-config-wizard(1).
    # It will not be overwritten, so edit it as you like.
    # Should you change your keyboard layout somewhen, delete
    # this file and re-run i3-config-wizard(1).
    # i3 config file (v4)
    # Please see http://i3wm.org/docs/userguide.html for a complete reference!
    set $mod Mod4
    # Font for window titles. Will also be used by the bar unless a different font
    # is used in the bar {} block below. ISO 10646 = Unicode
    #font -*-charter-medium-r-*-*-*-100-*-*-*-*-*-*
    # The font above is very space-efficient, that is, it looks good, sharp and
    # clear in small sizes. However, if you need a lot of unicode glyphs or
    # right-to-left text rendering, you should instead use pango for rendering and
    # chose a FreeType font, such as:
    font pango:DejaVu Sans 8
    # Use Mouse+$mod to drag floating windows to their wanted position
    floating_modifier $mod
    # start a terminal
    bindsym $mod+Return exec i3-sensible-terminal
    # kill focused window
    bindsym $mod+Shift+q kill
    # start dmenu (a program launcher)
    bindsym $mod+d exec dmenu_run
    # There also is the (new) i3-dmenu-desktop which only displays applications
    # shipping a .desktop file. It is a wrapper around dmenu, so you need that
    # installed.
    # bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
    # change focus
    bindsym $mod+j focus left
    bindsym $mod+k focus down
    bindsym $mod+l focus up
    bindsym $mod+semicolon focus right
    # alternatively, you can use the cursor keys:
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right
    # move focused window
    bindsym $mod+Shift+j move left
    bindsym $mod+Shift+k move down
    bindsym $mod+Shift+l move up
    bindsym $mod+Shift+semicolon move right
    # alternatively, you can use the cursor keys:
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
    # split in horizontal orientation
    bindsym $mod+h split h
    # split in vertical orientation
    bindsym $mod+v split v
    # enter fullscreen mode for the focused container
    bindsym $mod+f fullscreen
    # change container layout (stacked, tabbed, toggle split)
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split
    # toggle tiling / floating
    bindsym $mod+space floating toggle
    # change focus between tiling / floating windows
    bindsym $mod+Shift+space focus mode_toggle
    # focus the parent container
    bindsym $mod+a focus parent
    # focus the child container
    #bindsym $mod+d focus child
    # switch to workspace
    bindsym $mod+1 workspace 1
    bindsym $mod+2 workspace 2
    bindsym $mod+3 workspace 3
    bindsym $mod+4 workspace 4
    bindsym $mod+5 workspace 5
    bindsym $mod+6 workspace 6
    bindsym $mod+7 workspace 7
    bindsym $mod+8 workspace 8
    bindsym $mod+9 workspace 9
    bindsym $mod+0 workspace 10
    # move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace 1
    bindsym $mod+Shift+2 move container to workspace 2
    bindsym $mod+Shift+3 move container to workspace 3
    bindsym $mod+Shift+4 move container to workspace 4
    bindsym $mod+Shift+5 move container to workspace 5
    bindsym $mod+Shift+6 move container to workspace 6
    bindsym $mod+Shift+7 move container to workspace 7
    bindsym $mod+Shift+8 move container to workspace 8
    bindsym $mod+Shift+9 move container to workspace 9
    bindsym $mod+Shift+0 move container to workspace 10
    # reload the configuration file
    bindsym $mod+Shift+c reload
    # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
    bindsym $mod+Shift+r restart
    # exit i3 (logs you out of your X session)
    bindsym $mod+Shift+e exit
    #bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
    # resize window (you can also use the mouse for that)
    mode "resize" {
    # These bindings trigger as soon as you enter the resize mode
    # Pressing left will shrink the windows width.
    # Pressing right will grow the windows width.
    # Pressing up will shrink the windows height.
    # Pressing down will grow the windows height.
    bindsym j resize shrink width 10 px or 10 ppt
    bindsym k resize grow height 10 px or 10 ppt
    bindsym l resize shrink height 10 px or 10 ppt
    bindsym semicolon resize grow width 10 px or 10 ppt
    # same bindings, but for the arrow keys
    bindsym Left resize shrink width 10 px or 10 ppt
    bindsym Down resize grow height 10 px or 10 ppt
    bindsym Up resize shrink height 10 px or 10 ppt
    bindsym Right resize grow width 10 px or 10 ppt
    # back to normal: Enter or Escape
    bindsym Return mode "default"
    bindsym Escape mode "default"
    bindsym $mod+r mode "resize"
    # Bindings for my HP Pavilion
    bindsym XF86AudioPlay exec mpc toggle
    bindsym XF86AudioPrev exec mpc prev
    bindsym XF86AudioNext exec mpc next
    bindsym XF86AudioStop exec mpc stop
    bindsym XF86AudioRaiseVolume exec pavolume increase
    bindsym XF86AudioLowerVolume exec pavolume decrease
    bindsym XF86AudioMute exec pavolume mute
    bindsym XF86Save exec dmenu_run
    bindsym $mod+x exec x48
    bindsym $mod+Tab workspace next
    bindsym $mod+Shift+Tab workspace prev
    bindsym Mod1+Tab workspace next
    bindsym $mod+Menu exec i3-winmenu.py
    bindsym $mod+XF86Save exec gmrun
    for_window [title="Execute program feat. completion"] floating enable' border none; focus mode_toggle
    for_window [title="x48-0.6.4"] floating enable' border none; focus mode_toggle
    for_window [title="Wicd Network Manager"] floating enable' border none; focus mode_toggle
    # Float notifications
    for_window [class="Xfce4-notifyd"] floating enable; border none; focus mode_toggle
    # Start i3bar to display a workspace bar (plus the system information i3status
    # finds out, if available)
    bar {
    status_command i3status
    #exec --no-startup-id i3-msg 'workspace 2; exec firefox; workspace 1'
    exec --no-startup-id i3-msg 'workspace 10; exec claws-mail; workspace 1'
    exec --no-startup-id exec nitrogen --restore
    exec --no-startup-id exec xcompmgr
    exec --no-startup-id exec conky
    exec --no-startup-id exec mpd
    #exec --no-startup-id emacs
    exec --no-startup-id exec wicd-gtk -t
    ewaller$@$odin ~ 1002 %

  • How do I add multiple passwords to a FileVault2 external hard disk?

    Hello,
    On a boot volume, multiple users can have access to decrypt the disk - but with external disks it appears as though only a single password can grant access.
    How can I enable a second passphrase to unlock a hard disk? Thanks.

    Currently there's no way to add decryption keys to a non-boot volume.

  • Problem with USB External Hard Disk Drive

    I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
    I got same output from dmesg as Raistlfiren in the post before
    # dmesg | tail
    sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Info fld=0x0
    I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
    I can see that it is recognized by computer since it is shown with lsusb
    # lsusb
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    # lsusb -d 13fd:0540 -v
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x13fd Initio Corporation
    idProduct 0x0540
    bcdDevice 0.00
    iManufacturer 1 Initio
    iProduct 2 MK6025GAS
    iSerial 3 0010100500000000
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 2mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0001
    Self Powered
    From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
    Additionally, I have checked the content of /var/log/kernel.log
    Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
    Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
    Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
    Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
    Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
    Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
    Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Sep 16 22:04:03 hramat kernel: Info fld=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    and /var/log/errors.log
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
    Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
    Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
    Thank you for any help or suggestions
    Matej

    Thank you nTia89 for response. Sorry for not providing enough information.
    I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
    I did not tried to connect the disk to the computer directly, I will try it today.
    Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
    So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
    % fdisk -l
    Disk /dev/sda: 100.0 GB, 100030242816 bytes
    255 heads, 63 sectors/track, 12161 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
    /dev/sda2 1531 6672 41303115 7 HPFS/NTFS
    /dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
    /dev/sda5 * 6673 11908 42058138+ 83 Linux
    /dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
    Disk /dev/sdb: 60.0 GB, 60011642880 bytes
    64 heads, 32 sectors/track, 57231 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
    Disk /dev/sdb doesn't contain a valid partition table
    Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
    TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
    Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
    testdisk.log:
    Thu Sep 17 19:09:26 2009
    Command line: TestDisk
    TestDisk 6.8, Data Recovery Utility, August 2007
    Christophe GRENIER
    Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
    Using locale 'C'.
    Hard disk list
    Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Interface Advanced
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    NTFS at 8956/63/32
    heads/cylinder 255 (NTFS) != 64 (HD)
    sect/track 63 (NTFS) != 32 (HD)
    filesystem size 24579387
    sectors_per_cluster 8
    mft_lcn 1024141
    mftmirr_lcn 1650676
    clusters_per_mft_record -10
    clusters_per_index_record 1
    NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
    NTFS partition cannot be added (part_offset<part_size).
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Check the harddisk size: HD jumpers settings, BIOS detection...
    The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
    The following partitions can't be recovered:
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Interface Advanced
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : No
    search_vista_part: 0
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    Can't open backup.log file: No such file or directory
    interface_load
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    TestDisk exited normally.
    fixdisktable first output:
    % ./fixdisktable -d /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
    Sectors: start= 111, end= 84116382, length= 84116272
    Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
    1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
    1: 8003 1000 833f e0ff 6f00 0000 3183 0305
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    fixdisktable second output:
    % ./fixdisktable -d -r -v /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
    Sectors: start= 34148, end=36028797017147916, length=36028797017113768
    Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
    1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
    1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
    As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
    Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
    Any suggestions?

  • I used up my two downloads for my standard CS5 suite, my backed up program on my external hard drive isn't working. My serial number says it is invalid, what do I do?

    I purchased the standard CS5 suite (photoshop, illustrator, in design, bridge) student package for my laptop (through a download process, not dvd, in which I had two downloads). I used my first one, that followed with my hard drive crashing. I used my second download, and then I had an accident with my laptop and had to purchase a new one. I backed up all of my programs onto an external hard drive and I just tried to re download adobe programs using that. When i enter my serial number it says it is invalid. What can I do? Live chat will not help me because I do not have the current CS6 or CC.

    Double-check your serial number here: Find your serial number quickly
    Serial numbers will sometimes become invalidated if they were hacked and made available on the internet.

  • Can we add additional fields in work center creation using any user exit ?

    Hi,
    is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
    regards,
    madhu kiran

    hi,
    requirement is can i get the additional fields like equipment and asset in the work center creation ?
    i would like to maintain these against a work center
    and  using any user exit can i add additional fields ?
    regards,
    madhu kiran

  • My USB external hard disk won't work anymore after I updated to 10.4.10

    As I said in title since it's quite urgent to me. ALL of my files is in my external hard drive. It's format as FAT or FAT32 I can't remember since I use it between mac and PC. More than that IT IS WORKING FINE UNDER PC. Before updating to Mac 10.4.10 I used my hard disk fine till I updated to this version. I plug in my usb port and after a hours it still won't be detected. I can find my hard disk in finder or desktop. I have tried plug my hard disk to other MacBook or Mac Pro but still won't work anymore. However it's working fine under PC or when I started my MacBKPRO as WindowsXP under bootcamp, my hard disk is working fine, too.
    I have search this forum and seems someone have got the same problem as I face. I don't know what to do...and I feel so disappointed to Mac.

    As Mac OS X has no known viruses in the wild, that leaves you with one of three possibilities.
    1. When connected to the Windows machine, a virus has written over a critical boot block area which allows the drive to become crossplatform. Get the latest Windows virus detection software and make sure the drive is clean of Windows viruses.
    2. The firmware that allows it to communicate driverless has become corrupted on the drive case. Replacing the drive case itself will eliminate that problem, as suggested earlier.
    3. The directory damage is just enough that the boot block itself is damaged. Backup any critical data from the drive onto the Windows machine first, and run Alsoft Disk Warrior 4.0 to repair the directory and see if that works.
    The fact that Mac OS X 10.3.9 won't read it basically eliminates this as a 10.4.10 problem. Only a boot block or firmware issue like this could make a drive not readable on one platform, but readable on another.
    P.S. please note the nomenclature of Mac, versus MAC on this user tip, as it appears you haven't learned it:
    http://discussions.apple.com/thread.jspa?threadID=503342&tstart=10

  • Ejecting USB 2 External hard disks?

    I've just got some Freecom Toughdrive 250GB USB 2 drives.
    I want to check something about ejecting them and I can't seem to find info about this, even from Freecom.
    When you eject a USB 2 hard disk, should the disk then power down? My Freecom Toughdrives all remain "live" after ejecting (the ready light stays on and the disk is still spinning, you can feel the casing vibrate.) You get a little noise when the cable is pulled, as the disk suddenly spins down.
    Ive tried 3 of these with my Mac Pro and my girlfriend's MacBook and all of them behave the same - is this normal or am I damaging them by unplugging them like that?

    Note: since posting this, Freecom customer services got back to me, and apparently on a Mac, the bus-powered Toughdrives don't power down when ejected, but it's safe to unplug them anyway.
    On PCs, they do power down if you use the "safely remove hardware" option.

  • External hard disk that contain usb 3 output

    I am trying to connect a hard disk that contain an output port of usb 3 to do a job, i have a cable converter from usb 3 to usb 2, the hard disk is toshiba.  I thought it will be just plug and play.  My imac don't recognize it, what can i do?

    Exchange it for something else as those Toshiba EHDs are not compatible with Macs.

Maybe you are looking for