Identical request numbers

Hello, we have two sap system. One of the is the copy of other system. (We have done the migration)
Now we have the problem with numbering of transport requests in the copied system. We have identical request numbers in both systems. But sometimes we need to transport requests between the system.
The question:
How to change number range for request numbering in the copied system to have the different number range from the source system?

Hi,
There is maybe a better way but we have been used for several years to set the next requestnumber at the database level when doing a database copy system refresh.
We use something like :
Insert into sapr3.e070 values ('<SID>K90xxxx','K','R','XYZ','SYST','<YOUR_USER>','<AAAAMMJJ>', '<HHMMSS>',' ');
commit;
Regards,
Olivier

Similar Messages

BW 7.0 Automatic Deletion of Similar/Identical Requests from the InfoCube

Hi experts,
In BW 3.5 we have used a feature in a InfoPackage, where you can delete an u201Coldu201D loading, u201CAutomatic Deletion of Similar/Identical Requests from the InfoCubeu201D.
Now we are building a flow in our upgraded system and we can see that this opportunity is available in the InfoPackage to the PSA, when you load data from the source system (ERP) to the BW system but we would like to make this when we load an InfoCube some layers up (see exemple below; InfoCube2)
Source System -> PSA -> InfoCube1 -> InfoCube2
Anyone know if it is possible or if there is anything else you can do?
Regards,
Kerstin

in bi7 the load to the datatarget is done using dtp. the infopackage goes only to the psa. in order to achieve the same you need to use the process step in the process chain. you need of course to create a correct variant, but here you'll have the same options as you had before in the earlier version.
M.

Automatic loading of similar/identical request from infocube

Dear all,
Any one can give the description of Automatic loading of similar/identical request from infocube].please
Thanks
Rave

Hi,
From help.sap
Automatic Deletion of Requests from the InfoCube when Loading
To ensure that the data that is going to be loaded with an InfoPackage is available only once in an InfoCube, you can delete from the InfoCube any existing requests that have partially overlapping or similar selection conditions and relevant deletion selections.
After loading new data into the InfoCube, the InfoCube contents are checked using the selection conditions for an InfoSource/DataSource/source system combination, to see if overlapping data has been loaded into the InfoCube. The data that has been loaded into the InfoCube is not analyzed rather the selection conditions for the InfoObjects that you determined in the Scheduler are compared.
With this function the dataset in BW is reduced to the size necessary for analysis, and redundancies are avoided.
Check this link for more
http://help.sap.com/saphelp_nw04/helpdata/en/f8/e5603801be792de10000009b38f842/content.htm
Regards,
R.Ravi

Change Request Numbers

Hi Gurus,
We change request numbers using Internal number range, but there are some numbers which are missed and are not traceable.
Need help as clueless about the missing CR numbers?
thanks Anand

Crmd_order is a transaction so if you have selected the option of Early no assignment in spro->scenario specific....service desk...assign transaction type..
For SLFN if you have this entry then..
whenver any1 enter this transaction a no is generated....even if you dont save it...
But if you uncheck it then
Only when u save the transaction then no is generated.
Regards
Prakhar

Can we compress the cubes which are having same request numbers at a time?

Hi all,
Here is the situation. We have nine cubes which are all having the same request numbers...for some reason the compression has not taken place for all these cubes. Please note that we have design in process chain to compress all the data..but it has failed to do so. Please advise the possible reason....and how to rectify this in future. This is happenning for the last one week.
Now, trying to do it manually..Can I start doing this manually to all cubes simultaneously or I need to do it one by one cube...
Please advise.
Thanks,
LINDA

Hi Roberto and Shreya,
Thanks for your advise. We are observing for the last one week that the process chain is getting failed at compression level. We have checked at the cube level and found that all the data's were loaded successfully and all the aggregates were rolled up successfully.
Means, for the cubes, in the manage tab,
1.Roll up status is showing green
2.Compression status of aggregate is showing green
3. Request for reporting is available
4. But, the compression status in infocube is not showing any status (Field is blank.No green tick mark!)
When we checked the error message in the process chain,
we have observed as below:
SYSTEM ERROR:1
RSCDS_BUILD_STORED_PROC
BUILD_REPORT
RSS_TEMPLATE_INSTANTIATE.
The database view " /BIC/D100299T" is Write -Protecte.
DIAGNOSIS:
A SYSTEM ERROR WITH THE FOLLOWING PARAMETERS HAS OCCURED IN DATA MANAGER:
PARAMETER 1 = &V1&
PARAMETER 2 = &V2&
PARAMETER 3 = &V3&
PARAMETER 4 = &V4&
SYSTEM ERROR:2
ROLL UP TERMINATED: DATA TARGET XXXX, FROM OOOO565656 TO 0000565699
So, we are trying to manually do the compression to all the cubes...
Thanks for your advise and looking for more detailed expert advise /analysis from you.

Request numbers question

Hi Friends,
What r the steps involved in TRANSPORTING an object to another server?
Why we get two request numbers for an object ( main req number & Sub req number)..what is the significance of those two?
Regards,
Ram.

hi,
Whenever a program is created in Z/Y packages/development class it will prompt for creating transport requests.
Once created you can view form se09/se10 tcodes. These should be released while moving to quality system. Once released basis person will transport the request to quality system from STMS tcode.
The same request will be moved to production once tested.
the one you see as the main node is the transport request number and below as the sub nodes are the different objects or the task you can say.
regards,
pankaj singh
reward points if helpful

Automatic Deletion of Similar or Identical Requests

Dear Gurus
i am creating Automatic Deletion of Similar or Identical Requests process for PP_C04 INFOCUBE.
The problem is that when i select object type DTP , i am unable to see the relevant DTP in ObjecrtName . The data source is full update and DTP IS SET TO DELTA.

Hi
Looks like you already have some data loaded using DTP.
can you delete and reload data? if yes delete loaded data and then do these steps.
Regards
Sudeep

Why do colors with identical cmyk numbers look very different?

i thought i had this problem solved, but here it is again with a new wrinkle. i have this gorgeous orchid bg box, cmyk 9-10-0-0 in a file with cmyk transparency blend space. same set up in file 2. i create a new bg box with the same numbers and it's a whole different color. there must be some parameters mismatched. what else should i be looking for to make sure the file setups are identical?

Attached is an image of what the color picker looks like after I have used the eyedropper to sample what I believed to be a swath of CMYK color.
It looks to me like the image you are sampling from is an RGB image. You can check that by opening the Links panel and clicking on the link, which will display the image's color space and profile.
actually, what i'm sampling--the lavendar bg on left --is color i created in ID; it's not a link. i thought i created it in cmyk; how can you tell it's rgb?
If you are picking up an out-of-gamut color from an RGB image, you can't match that color with a CMYK fill. You could make the background fill an RGB color and get a match. In that case both the fill and the image would get separated to the same CMYK mix on output to a CMYK device.
which does have a CMYK transparency blend space and separations preview in output.
You are confusing the Transparency blend space with a document color space. The Transparency Blend Space only comes into play if you have transparent objects that need to flattened. It has no effect on non-transparent objects.
hmmm, that's not my experience. so far as i can determine, i have no transparent objects, and yet the color on screen changes dramatically when i switch transparency blend space from rgb to cmyk.
why does changing from View to Separations within Separations Preview change the color of my CMYK background so dramatically?
Your background isn't CMYK it's RGB. When you turn on Overprint or Separation Preview, you get a preview of how your out-of-gamut RGB violet color will convert to CMYK.

Is seperate request numbers for all prerequisite & applied notes possible?

Hi
I understood that using SNOTE for Note execution, all of the changes done including those in the prerequisite notes are covered in one request number.
The question is, is it possible (any options setting) to automatically generate different request number for each notes (prerequite notes) execution?

Hi
You can create a "Approved" notification to be sent out at the last stage of the path, and apply the custom messages to that notification per respective last stage/path.
However, if you are planning to use the %PROVISIONING% or %PROVISIONING_WITHOUT_PASSWORD% variable within any of these custom notifications, it only seems to work in the notifications sent out at the end of the request/ AR Close set up in the Global section (screen 1 in MSMP).
There is a note at the end of the SAP note that describes this limitation:
Remark: Class CL_GRFN_MSMP_BADI_END_OF_PATH implements following logic:
At end of each path of Access Request, workflow email will be sent to msmp agent GRAC_USER using template GRAC_AR_CLOSE
Hope that helps.

Request Numbers

Hi All,
Is any body having the ida about the requestnumber storage,
I mean i have a Project Name & enhancement name based on enhancemnet i would like to know the request number.
Ex: In Cmod enter the projectname and click on components
then it will disply the list of components if i click on comonents i can get the include object name then in version managemnet i know the request number,
But i would like to develop the report based on project name it will display the components along with the requet number is there any link in database tables please let me know.
Thanks in advance..
Regards
Rao

I think you can display the requests for an object type - object , using Xn SE03 --> select Search for Objects in Trsanport Requests ( presss execute ).
Now searach for R3TR CMOD <Project Name>
Select Modifiable & release Tasks checkboxes...
It will give you list of transports ..
Thanks,
Ram

Error adding BW object into a transport request

Hi all, I'm modifying an OHD and when I'm trying to save into a new request I got the following error: "Attention!. The selected object is already locked by another transport request". And it shows me which is the TR that has the object locked, however, when I go to SE10 in order to check if the object its locked there, it is not!. Any ideas on how to solve this problem?
Mauro

Did you try unlocking from SE03 - enter that request which system warned and execute and try collecting the Object again in new request
SE03 - Search for Objects in Requests/Tasks - enter IOBJ - Obj tech name - select Modifiable option and execute .. you will see the request numbers .. where this object is locked

Function Module not being displayed in the Transport Request

Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.

Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh

How to find multiple transport requests for one object

Hi all,
Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
Based on that Request Number i will fetch remaining Task numbers under it.
Then for all the Tasks Numbers, i am fetching their objects by using table E071.
I need to list out whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
I tried the following FM's , but not able to get the solution.
SVRS_DISPLAY_VERSION_LIST
SVRS_GET_VERSION_DIRECTORY_46
SVRS_GATHER_REQUEST_FRAGS
Thanks..

Hello
I have tried with below code
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                EXPORTING LIST TO MEMORY
               AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
   TABLES
     listobject = list_tab
   EXCEPTIONS
     not_found = 1
     OTHERS           = 2.
IF sy-subrc = 0.
   CALL FUNCTION 'WRITE_LIST'
     TABLES
       listobject = list_tab.
ENDIF.
break-point.
Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
Please try some other options
Thanks

How to delete a specific request out of the InfoProvider

Hi all,
we have a generic datasource to extract our CO-PA data. Unfortunately this datasource can not deliver any delta at the moment. This is why we need to have a full upload. In InfoPackage we select the single period 001, 002, or 003.
Now in March we only need to load the period 003 daily. In my process chain I would like to have a function that deletes only the request of this infopackage and not also the requests of the previous months, so I don't need to load all everyday, but only the current month.
Do you know such a process type?
Thanks in advance!

Hi Sandra,
1. Try "Delete Overlapping Requests from InfoCube" process type.
2. You can also do this in the InfoPackage. Goto Data Targets tab "Automatic Loading of Similar/Identical Requests"
These two are only possible for a Cube.
Anup.

Overlapping requests using DTP

Hello BIGurus,
I want to delete overlapping requests in the following scenarios using DTP
1.In Master data Attribute
2.DSO
3.Info-cube.
I am not able to find Deletion of overlapping requests option in the DTP.
Can you please help me to find out option in DTP to delete overlapping request?

Hi
Overlapping request will always delete data based on the same selection condition.
In your case as the import dates are different for both the requests, it will not delete the previous request.
You can try selective deletion option if feasible.
or
Overlapping will happen only for cubes. Not to DSO (because already we have overwrite option for DSO) so no need to maintain the setting for DSO and also it wonu2019t accept to give the settings.
We can have the settings to u201Cdelete overlapping request from basic cubeu201D only.
We can give these settings in 2 ways
1. In IP level
Go to IP maintenance screen > go to target tab > click on u201Cautomatic loading of similar/identical request from the info cubeu201D and set the setting as per you convenience
2. if we want to give the setting in Process chain >
Select the process type u201Cdelete requestu201D and mention the IPs in the maintain variant screen
Click on the u201CDeletion selection u201D tab and set the setting as per you convenience
santosh

Identical request numbers

Similar Messages

Maybe you are looking for