Identify if an item is a Raw Material or Finished Goods? Inventory Table

Hello All,
How do we identify Material_type - whether the goods received is a Raw Material or a Finished Goods. (it should be in some Inventory Table )
I need to find out from which table and which column do I get this information from?

Hi ,
In Inventory concepts, the table "MTL_SYSTEM_ITEMS_B" holds the definitions for inventory items, engineering items, and purchasing items.
So if you were not sure what the item type is of then check the following table for item description in 'Description' Column, set the language and source_language columns to your required language
1. "MTL_SYSTEM_ITEMS_TL"
In specific to finished goods use the following query
SELECT ITEM_TYPE
FROM MTL_SYSTEM_ITEMS_B
WHERE ITEM_TYPE = 'FG'; /******** Here FG = Finished Goods.
In others ( like Raw Material received from ) use the following item_type whichever applies to your requirement,
I - Inventory Type
P - Purchased item
SI - Supply item.
Regards,
@P
Edited by: 995022 on Mar 21, 2013 10:55 PM

Similar Messages

Differentiation of raw material and finished goods from tax / valuation

Hi,
There are certain materials which are sometimes produced inhouse (considered as finished goods) and sometimes procured from outside (considered as raw material) i.e the same material can be raw material or finished goods depending on its use. Taxes and valuations are different depending on whether the material is RM (Raw material ) or FG (Finished goods) . How can we differentiate if we intend to have the same material number. Do not intend to have split valuation.
Thanks in advance .
With regards,
Mrinal

You cannot differemntiate them. Only way to differentiate such materials is by either by different codes, or by split valuation.

Raw Material and Finished Goods Items

Dear Users,
I need to write a query which gives me the Raw Material Item and the Finished Goods Items.
Which table contains this kind of data. Raw Material Item is Processed and a Finished Goods Item is produced, so i need all raw materials items which went into the resulting Finished Good.
Our Company is not using BOM module, rather it is using OPM. So the query should use OPM tables.
Thanks
Sandeep

Hi
You can get the related details for Ingredients/Production and even By products in the form Formula and Table name called FM_FORM_MST
Navigation--> OPM Prouduct Development/Formula
Regards
Raj
Sierra

How to create production order for multiple items having common raw materia

Dear all,
We are running a sheet metal fabrication company at Vadodara Gujrat.
Please guide us how to create single production order for multiple items using single raw material??
For example, We want to produce baby shirt(item code AAA001), shirt with full sleeve(item code AAA002), shirt with half sleeve(item code AAA003),shirt slim fit (item code AAA004),shirt loose fit(item code AAA005) from single raw material say(item code XXX001).
Right now we have to create 5 production order to produce above 5 items of single sales order in SAP B1 though it is made from single raw material which is foolishness and time consuming too. (Please also note that to produce any finfish good item, raw material required for that item may vary every time in our process.)
Kindly guide us how to solve the problem.
Thanks.
RUPESH +91-9227744273
WEB : www.gorasia.co.in

Hi Rupesh Gorashiya,
This is possible through MRP for that you have to put Sales Order first and Run MRP Wizard
MRP Wizard Put Multi Production Order as per Item Taking in Sales Order just click it on and execute.
Thanks,
Srujal Patel

How to Identify an item as a Raw material or not?

Hello,
I would like to know how to identify a particular item that is bought, if it is a raw material that will be used for further processing to build any other finished product or if it is a finished product that can be sold directly. I need to find out which table and which column we can find the information from?
For example, we bought an item like motherboard, which is used as a raw material to build a laptop.
I suppose it is clear, so, can any one let me know which table has this kind of information. Is it available in the Purchasing module tables like PO_Headers_all, etc..
Thank you

Check table MTL_SYSTEM_ITEMS_B, COLUMN BOM_ITEM_TYPE.
BOM_ITEM_TYPE = 1 (Model)
= 2 (Option Class)
= 3 (Planning)
= 4 (Standard )
So if BOM_ITEM_TYPE 1 means it is configurable. & 4 means it can be used as raw material as well as individual product ex. keyboard.

Raw Material Inspection before Goods Receipt

Hi Gurus,
My Client wants to carry out Raw material Inspection before doing GRN.How it can be mapped in SAP.Please tell me the steps .
Thanks in advance,
Soumyendu

Dear,
Kindly activate QM view in material master and activate inspection type 02( Goods issue inspection) for the materials you required
Go to tcode mm02 >selcet the purchasing view and mark the quality inspecton check box.
You can inspect & clear the stock before issuing to either costcenter or production etc.
Regards,
R.Brahmankar

Raw material & its finished product link

Dear All,
How to get the raw material and its corresponding finished product link from SAP.Can you please provide the T code (if it is there) otherwise please provide the logic.
Thanks in advance
Regards,
Rubin Luke.

Hi
You can verify any material at plant level from SAP standard table MARC using SE16N Tcode.
else use MM03 display material - before entering the material press F4 and choose plant material selection and enter your plant you can see all the materials for that plant. then you can choose your required material
then using the transaction CS15 - material where used list
youu can find the FG materials for which thise material is used as component.
in CS15 enter the material, flag Direct and flag Material BOM
Hope this helps
BR
SK

Is it possible for an item to be both phantom and finished good?

We have a situation where the client needs a phantom item with bill of material. It is a subassembly and the way SAP explodes it on the higher level bom is perfect. However this same item is also sold when not used as a subassembly. The only answer I can find is to have two part numbers, but this does not help the client becase it is the same item whether it is used as a subassembly or is sold as a unit. Is there a way for it to be both? Or another way to manage this issue?
Thanks

Hi,
Why don't you duplicate the item and untick the phantom item and duplicate the BOM from the phantom item to the new item, so you can sell it to your customer.
This way, the phantom item is still in the BOM of the other item and you can sell the same product to your customer.
Kind regards,
Hendri Wessels

Valuation Class not appearing in Material Master (Finished Goods)

Hi Friends,
I am facing problem with Valuation Class not appearing while creation of Material Master especially in Finished Products
when i give the Valuation class it showing the message like below
*Valuation class IBM2 not allowed for material type Finished product*
*Message no. M3180*
*Diagnosis*
*The combination of values you have entered is not defined in the system.*
*Procedure*
*Check your entries, and choose a valid value or combination of values with F4.*
*If you want the value(s) to be defined in the system, contact your systems administrator.*
and When i press F4 in Valuation Class area it is not appearing
Can any one give me the solution
Regards,
Ram

Hi Ram,
Go to Transaction Code OMSK. You will find three tabs there.
Go to the second tab i.e, valuation class, note the account category reference assigned to the valuation class "IBM2".
Come out of that screen and access the third tab ie., Material Type/Account Category reference.
Check whether Account category reference related to the valuation class "IBM2" is assigned to ther material type "Finished product" or not.
If not, assign the same. It should work.
Warm regards,
Murukan Arunachalam

Excise Invoice cannot be captured for RG1(Finished Goods) material

Dear Friends,
While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
Excise Invoice cannot be captured for RG1(Finished Goods) material
Message no. 4F276
The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
Pl help me how to get rid of this error.
Regards,
Ask

In GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
Regards,
Indranil

Raw Material Item and Finished Goods Items

I need to write a query which gives me the Raw Material Item and the Finished Goods Items.
Which table contains this kind of data. Raw Material Item is Processed and a Finished Goods Item is produced, so i need all raw materials items which went into the resulting Finished Good.

I figured out the answer to my own question. The BOM_INVENTORY_COMPONENTS table has information about the components (raw parts), and the BOM_BILL_OF_MATERIALS table has information about the assemblies (finished goods). The two tables join via the BILL_SEQUENCE_ID column. Here's an example query:
select ic.component_item_id raw_item_id, ci.segment1 raw_item_number,
ci.description raw_item_desc, bom.assembly_item_id finished_item_id,
bi.segment1 finished_item_number, bi.description finished_item_desc
from bom_inventory_components ic,
bom_bill_of_materials bom,
mtl_system_items bi,
mtl_system_items ci
where ic.component_item_id in (select inventory_item_id from mtl_system_items i
where organization_id = 82
and segment1 in ('800800000', '800800001',
'800800005', '800800006',
'800800009', '800800020',
'800800021', '800800022'))
and (ic.disable_date is null or ic.disable_date > sysdate)
and ic.bill_sequence_id = bom.bill_sequence_id
and bom.assembly_item_id = bi.inventory_item_id
and bom.organization_id = bi.organization_id
and ic.component_item_id = ci.inventory_item_id
and bom.organization_id = ci.organization_id
order by raw_item_number, finished_item_number;

Problem of Raw Material & Finished product

Dear Experts,
My problem is related to Item Data Master when i am trying to select in Excisable Category Material Type Finished Goods,Raw Material & Capital Goods then opposite result i get. When i select Raw Material Category then i get result Finished Goods.Acutally i select item & Item Group same.
Regards
Amol

Amol,
Click on the link to get to the Support Page.
https://websmp203.sap-ag.de/support
Use Report a Product Error link
Suda

How to Control Finished Product Price based on Raw Material

Hi Experts,
Our client manufactures Steel Products where basic Raw Material is Steel.
Customer will give annual contract/Sales Order on the rate prevailing on the contract date. But there is clause that if Steel prices increase / decrease by 5% then correspondingly Finished product price will change by 3%.
How can this be mapped in SAP where by based on Raw Material price, Finished product can vary?
Regards

Hi Ajay,
Please go through this link. you will get an idea
Price list change according to raw material cost
Thanks
Dasaradha

Table For Raw materials & finish good

Hi,
I am doing ER6 Report.
I want raw materials details for finish good (From Bill of Materials).
In which table i will find out details of raw materials for finish good.
or any table where finish good & raw materials relationship are there.
Pls help me.
Regards,
avijit Dey

Hi,
I have already checked that one.
but from that table u can find all raw materials for finished good.
it, coming tree structure way only.
form that table u have to go one by one...
but i want such table where all RM are available for one FG.

Change description of excise item tab Raw material to Input material

Hi,
We have upgraded R3 4.7 to ECC 6.0 now we required in MIGO transaction Excise Item tab Indicator for Material type we need to change the description of this as RAW MATERIAL to INPUT MATERIAL and Consumable to Capital Goods which is in R3 4.7
Please suggest me any config.
Thanks
Shital D

Hi,
The above material type showing in MIGO screen, as you already declared the material under which material category in J1ID & so then value flowing.
You can not change here & you have few options to declared the material under which material categories.
You can keep all raw material as raw material & Consumable as asset.
But if your business needed very much, Just have a discuss with ABAPer for your requirement.
Regards,
Biju K

Identify if an item is a Raw Material or Finished Goods? Inventory Table

Similar Messages

Maybe you are looking for