Idisk is not working

My idisk is not working at all. From my desktop idisk (in finder), I can click on a folder and it will act like it opens to the documents within it, but then nothing will show. In the rare chance that the folder does open to other folders and documents, everything inside it slowly disappears. I have no idea what is going on, please help! this is happening on both mac computers on my network (one is a powerbook G4 and one a desktop).

you posted your question in the automator forum. I suggest you ask in the mobileme forum.

Similar Messages

  • I cannot access my idisk, I used the password I used to log into my user name but it is still not working. Please help!

    I tried several times since I bought my macbook pro to log into my idisk. My password for my user name does not work. I am clueless about what to do next.

    You need to turn the phone off and leave it in dry rice for 3-5 days. Then, plug it in and charge it for about 15 minutes and then try to turn it on. If it doesn't work at that point, it will be time to get a new phone.

  • IDisk not longer visible in Sidebar - Modifying Preferences did not work

    Hi there,
    I also have some problems with the side bar in Finder.
    I don´t longer have the iDisk-Icon in the side bar. I´ve unchecked and checked the box in Finder-->Preferences but that did not work...
    I also had similar problems with a not proper working network icon in the sidebar which I could solve with a forced end of Finder.
    Any ideas?
    Thanks and best wishes...
    Markus

    Try this. With the external display connected and turned on and the MBP turned on, close the MBP. Close it, not shut down. This action is supposed to send a signal to the external that it is the only live display.
    You should also check in the System Report if the external display is listed.

  • Web gallery still not working.

    The web gallery feature is still non-functional. I used to use it all the time. Suddenly a few days ago I noticed that it simply does not work anymore. I highlight and event, click web gallery, it creates a web gallery in the left sidebar of iphoto. The little progress circle turns for about 15 seconds, then suddenly the web gallery from the sidebar disappears and it as if I never clicked on the web gallery button. All my old we galleries are gone. I tried deleting iphoto prefs and deleting to _gallery folder from my idisk. No luck. When I try publishing a movie in iMovie to the web gallery, everything seems to proceed correctly. It compresses and uploads. The when I click the link provided, I get Apple's version of error 404: no such website.

    Ben:
    See if you can upload a file, any type will do, to the Sites folder on your iDisk via the Finder. I had a similar problem. When I tried uploading a file to the Sites folder or any of its subfolders I would get an error message. I reported it to the iWeb and .Mac feedback sites. It went away for a while and then came back that same day and then went away. Apple did get back to me and checked my account. They reported all was well. If you do get an error you may have a similar to mine but one that's not correcting itself. Report you problems to:
    http://www.apple.com/feedback/mac/tm.html
    http://www.apple.com/feedback/iphoto.html
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • IDisk will not Sync, nor will iWeb Publish

    Started having this problem "iDisk Sync Failed" a few days ago.
    Have not heard back from Apple Customer support and it has been over 24 hours since I reported the problem.
    I have no space issues in iDisk and my internet connection works fine.
    Need to publish in iWeb but it will not work with out iDisk and cannot use the old homepage method since it requires putting photos into iDisk to access in .mac.
    $179 a year for .mac which right without being able to publish to iWeb or Homepage or Sync data for backup is really frustrating.
    Will Someone at APPLE Please respond?
    iMac Power PC G4   Mac OS X (10.4.7)   40GB iPod, 250GB LaCie EX HD

    Lori,
    It sounds as if you've been able to sync in the past, right? What I'm going to suggest to you may take a while. I'm going to suggest that you turn off iDisk syncing, then delete the iDisk.dmg file that appears on your desktop, then turn on iDisk syncing again and do a fresh manual sync. This will take a while to copy down your entire iDisk. But hopefully this re-establishes your sync connection with .Mac.
    Obviously if there is anything on your local iDisk that has not been synced to your network iDisk, you might want to back that up locally. Also, anything that you might need immediately off your iDisk should be backed up first as well in case you can't get to your iDisk later.
    When you are ready, see if this helps with the syncing process for you. Good luck!

  • Not working, nothing publishes.

    I just installed the new iweb 09. Publishing is not working, the files stay red, instead of turning blue after uploading and none of the changes I'm making on iweb are being published on the web.

    It is possible that there are issues with the Apple server.
    I do have a MobileMe account but I wouldn't think of publishing my own websites there, never mind a client's.
    The Apple server is not known for its reliability and has a restricted bandwidth so that its not suitable for business or commercial use.
    The main downside is that it has virtually zero tech support.
    I publish to Host Excellence and yesterday I had to move several websites to a new account.
    Tech support provided me with all the instructions. When I went to direct the domain names to the new nameservers, I was told it would take 24 to 72 hours. It took 20 minutes.
    Late last night there was a side server issue with the new account. I emailed tech support and, when I woke up 4 hours later they had fixed it and put a monitor on it to make sure it doesn't happen again.
    This account came with 3 free domain registrations, 15 dedicated IP addresses and unlimited everything else for less than a MobileMe subscription.
    With this type of account I can publish 18 different websites without resorting to sub sites, use custom forms, mail forward, redirects, autoresponders and bulk mail. I can run all kinds of scripts and a data base and even build a web store front if I want.
    MobileMe was designed with small personal websites in mind and only allows one domain name forwarded using Cname. Any others have to use masking which is absolutely useless for SEO.
    If you are really stuck and the site doesn't use hit counter, blog & photo comments etc, you can try uploading it by drag and drop to Finder/Go/iDisk/My iDisk/Web/Sites.

  • Just bought iworks and the serial number is not working. help!

    just bought iworks and the serial number is not working. help

    How did you buy iWork (no 's', capital 'W')?
    If you downloaded the trial version earlier, and have since purchased a serial number, iWork will ask you for the number the first time you launch one of the iWork applications after the trial period ends.
    If you bought a retail box, or bought the individual applications through the Mac app store, no serial number is needed, but if any part of the trial version is still installed on your computer, you'll get a request to enter a serial number before proceeding.
    In the last case, you must delete all traces of iWork and it's applications (but not the documents that you have created and saved), then reinstall the purchased versions from the DVD or from the app store.
    For the simplest and most efficient means of deleting the trial version, go to Yvan Koenig's iDisk, then to:
    for_iWork > iWork 09 > uninstall iWork 09.zip
    Unzip the file, open with Script Editor and run.
    Regards,
    Barry

  • Action script 2 not working

    New to Flash CS4, but could do basic button stuff like this in Flash MX 2004. (Haven't been doing anything with Flash in the meantime, but now have CS4 and am determined to get back into it.)
    I chose Action script 2 when starting, and in the publish settings. Made some very simple buttons and used the action script assistant but cannot figure out why they are not working. i keep going around and around and getting nowhere.
    would someone please take a look and advise? I am STUCK.
    Please?
    the file is too big to attach, but if anybody is willing to help, i'll share the file via my iDisk. Thanks so much.

    I have a few suggestions for you -- not that you asked, but hey it is a free forum with volunteers, so you get what you get!
    First if you really don't know AS2 all that well, but you want to get into coding I would suggest starting with AS3. It is the future and if you have to learn new stuff it might as well be the newest, new stuff. AS3 is the future of Actionscript and Flash. It is a little more complex in some respects, but in many others it isn't that much more difficult and it really helps if you haven't learned all kinds of "bad" ideas from how AS2 was....
    Next, if you decide to stick with AS2, I would suggest learning the latest ways of doing stuff in AS2. Using the on(event) type of coding is really old and it won't serve you well if you want to advance very far with your coding.Here is a great article on the transition to the newer style and why it is a good idea:
    http://www.quip.net/blog/2006/flash/museum-pieces-on-and-onclipevent
    After that, consider ditching buttons all together. They are really twitchy and strange and most people I know gave them up when movieclips could have button events attached to them.
    Finally on the issue of Scenes, they are a great way for timeline animators to organize their content. And they are great when everything is just played back to back. In fact that is what happens to scenes, when you publish the timelines are strung together in sequence and then the "scenes" are deleted. The whole thing becomes just one big long timeline. The problems come in when you start using code to move the playhead around. The documentation seems pretty straight forward and it should work, but there are just several little tricky things where it doesn't work. Sounds can cause problems too. So if you plan to use code I always recommend that you use movieclips to organize your "scenes" and not the actual scenes....

  • Latest update of iWork is bugged - spanish language and not working Charts view in Inspector in Numbers

    Latest iWork update ("iWork Update 6", version 9.1) got my Numbers broken. I'm Polish user and I use Numbers in Polish language. After latest iWork Update I can't use Numbers - everything is fine, everything works, everything is in Polish, but...
    When I select Charts in Numbers' Inspector it is in Spanish and it does not work at all - looks like broken view/nib/whatever. It is not random - I mean I've installed the update on one Mac (10.6.8) and it is in Spanish, I've installed it on my MacBook and it is in Spanish and I did not installed it on my iMac and it is working! That implicites that the "iWork Update 6" makes Numbers broken (again, not working Charts inpsector pane and Spanish instead of Polish).
    However - when I change user language from Polish to English, log out and log in, than run Numbers, everything looks ok - Charts inpector pane is in English and it does work. That is kinda workaround, however this is not a solution!
    I tried to install iWork from the CD (so not updated), however it doesn't work either - update must be somewhere hidden in system. I need this repaired, because it makes Numbers unusable and makes my work harder :|
    Amadeusz
    BTW This report bug is probably for Apple Developers/Apple Staff, however even as I'm registered developer, I can't find a way to contact them/you

    This problem was already described (2011/08/11) here and I reported it as Bug #  9937633
    Yvan KOENIG (VALLAURIS, France) mardi 13 septembre 2011 10:26:23
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Iphone 4 icloud not working

    icloud not working on my iphone 4, the moblie me app is still on phone, so i dont thank that icloud is working

    If you migrated your MobileMe account to iCloud you can continue to use your MobileMe Apple ID/login for iCloud.  Also, I assume by "MobileMe app" you are referring to iDisk.  If so, you can continue to use iDisk, and the iDisk app through June 30th.  If you are having trouble getting iCloud to work, try deleting the account from your phone and adding it back.

  • Not work tablet UI on Prestigio 5080 PRO tablet

    I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

    Would it be possible for you to share the problematic pdf and OS information  with us at [email protected] so that we may investigate?
    Thanks,
    Adobe Reader Team

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

  • Adobe Bridge CS5 in windows 7 not working?

    Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
    Tried to install creative cloud..again some error. Error code : 82
    Could you please advice how I can fix my adobe bridge.

    https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
    please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

  • ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Maybe you are looking for