Idle Session Time

Hi guys,
I'm having trouble with the idle session time on my pc
Im sharing a folder over a network and have windows 7 ultimate installed --- which allows up to 20 connections 
I want the PC to auto logoff users if they are idle for over 1minute
I've set the time limit on this to be 1minute through cmd prompt and through "net config server" i can see its set correct
 maximum logged on users  20
 maximum open files per session 
16384
 idle session time (min) 1
However i can see that users connected to the share do not get disconnected at all ---- i have users with many hours of idle time still connected
any help at all with this would be much appreciated,
thanks a million,
Ger.

Hi,
Sorry for my mistake. I miss type the sepcific entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
In the right pane, click the autodisconnect, modify its value as what you want.
To change the time-out duration in the client-side during a UNC connection, specify the arbitrary time in KeepConn.
For more information, please refer to this:
http://support.microsoft.com/kb/297684
Karen Hu
TechNet Community Support

Similar Messages

  • Idle session time out

    Dear support,
    i have windows 2003 server,
    i need RDP idle session time limit in this server .
    Regards,
    Krishna

    Hi,
    I would like to check if you need further assistance.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • How to set SAP idle session time out

    Hello gurus,
          I want to know how to set the time to terminate idle SAP session. What is the parameter and what is the T-code to access that parameter?
    Thanks and Regards,
    Rahul

    Hi Udvadia
    Maximum work process runtime parameter
    rdisp/max_wprun_time                        600
    If its a portal or something else it might differ, above parameter is for a regular work process in a SAP Netweaver installation.
    This can be set in the startup profile of your system using transaction RZ10.
    *Indeed dynamic parameters do not require stop/start
    Reward points if useful.
    Kind regards
    Tom
    Message was edited by:
            Tom

  • Server 2008 smb idle sessions staying open after 15min time period

    The SMB idle session time appears to be set to 15 minutes yet there are sessions open that are 4 days old.
    I think that the auto-disconnect timeout is being ignored on the Windows Server 2008r2. Sessions should not be staying idle for days.
    Thanks
    Steve

    Hi,
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thanks for your understanding and support.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CFolder Session time

    Hi Gurus,
    My system is cFolder 4.5 version and client want to limit idle session time as 30 minutes.
    If a user make one session via browser and do nothing for 30 minutes
    then system close his or her session.
    So I asked BC to setup for this requirement.
    I checked that session is closed in SM04.
    But after the session was gone, if I click "HOME" link in the cFolder screen, system generates session and I could see in SM04.
    Is there any solution for this problem?
    Thank you in advance.
    Regards,

    http://blogs.technet.com/b/speschka/archive/2010/08/09/setting-the-login-token-expiration-correctly-for-sharepoint-2010-saml-claims-users.aspx
      This PowerShell will make the change:
    $sts = Get-SPSecurityTokenServiceConfig $sts.UseSessionCookies = $true $sts.Update() iisreset
    After doing this you will see that there is no longer a FedAuth cookie written to disk.  To change things back to the default behavior just reverse your steps:
    $sts.UseSessionCookies = $false $sts.Update() iisreset
    $sts = Get-SPSecurityTokenServiceConfig
    $sts.LogonTokenCacheExpirationWindow = (New-TimeSpan –minutes 1)
    $sts.Update()
    Iisreset
    http://jasear.wordpress.com/2011/01/10/sharepoint-2010-set-session-timout-on-a-fba-enabled-site/
    If this helped you resolve your issue, please mark it Answered

  • How Can I Release sessions if these are idle long time Automatically.

    Dear Experts,
    How Can I Release sessions if these are idle long time Automatically based on some time frame..
    So that session memory will be free and when i go to reconnect the session then we will have enough memory for our transaction processing.
    I am asking this question because, In my case (Web Load Testing) after completion the processing this parameter still showing 86% Usage.
    so How Can I release it.

    Change value of IDLE_TIME in profile or better create new profile with less IDLE_TIME and assign to users.
    IDLE_TIME Allowed idle time before user is disconnected (minutes)
    Below is example if user is idle for 20 min , he/she will disconnect
    ALTER PROFILE developer LIMIT idle_time 20;
    Cheer,
    Virag Sharma

  • SSO Partner Application and Session Time out

    Hi ,
    We have an application on forums.oracle.com which is implementing the Authentication scheme as SSO, that is working well, now we want to implement Session Time out if the user is idle for some time and ask him to login again after the session fails, I have tried to implement this feature as given by Scott in the thread session timeout , well the problem is since we dont have a login page here how do we set the cookies owa_cookie.send(
    name => 'HTMLDB_IDLE_SESSION',
    value => to_char(sysdate+(20/1440),'DD-MON-YYYY HH24:MI:SS'),
    expires => null,
    path => '/',
    domain => null
    and where is the current point to implement it.
    Any help on this is greatly welcome.
    Thanks in Advance.

    Naveen,
    I don't remember how the solution works. But if you don't have a login page you can usually put code in the post-authentication process of your authentication scheme to do whatever the login page process would have done.
    Scott

  • Session time out when working in application level

    Hi
    We are upgraded our PROD environment from 11.5.10.2 to R12.1.3
    When end user working at application level then it is throughing the session time out error, end user is not idle state he active and working on application level
    I have checked the profile ICX:Session Timeout it is 30
    Thanks
    Shaik

    Hi;
    Please see:
    ICX:SESSION TIME OUT
    Re: Inccreasing the timeout  parameter for the Oracle R12 session
    Also see:
    How AutoConfig sets ICX: Session Timeout [ID 307149.1]
    How To Manage Timeout at Responsibility Level [ID 412224.1]
    Regard
    Helios

  • Session time out in Application server -reg

    hi friends
    We have Oracle Application server 10g in cluster mode in our organization. We are using Oracle Forms and Reports . But there is one issue. If the user keeps the screen idle for more than 20 min the system gets timed out and requires sdba authentication . We actually increased the time out value. But we could not able to remove sdba authentication. Our aim is to remove authentication after session time out. It is ok even if the application completely closes and comes out of the screen. But the user must not be asked to enter sdba credentials after system is idle for the time out period.
    M.C.Jayanarayan

    Hi,
    you posted this question to the JDeveloper forum, where it may be better posted to the application server forum or the Forms forum
    Frank

  • Application session time out

    Hello
    i have an application deployed on weblogic 11. after 30mins the application session times out.
    1.how can increase this time.
    2. can this be done in weblogic since on the application side there is no configuration for the time out.
    please assist me
    Thanks

    Hello;
    On middleware the default should be 3600 seconds.
    To change :
    Login to the WebLogic Administration Console
    Under domain structure click Deployments
    Click on the "em" Enterprise Application
    Click on the Configuration Tab
    Set "Session Timeout (in seconds):" to 7200 ( or whatever you want )
    Hit the Save button to save your changes in the deployment plan
    I would make sure an idle timeout in not set in the database profile as well.
    Best Regards
    mseberg
    Also worth a look :
    How to Troubleshoot Oracle Fusion Middleware 11g OPMN Issues? [ID 1303000.1]
    Edited by: mseberg on Oct 28, 2011 12:41 PM

  • Having too many idle sessions?

    Hi,
    We have too many idle sessions at the database end? How can it be controlled apart from using database resource manager? Since some users execute long operations? Please clarify.
    Thank you,
    Adith

    Having 5 of 60 sessions active is entirely reasonable. A session is ACTIVE only if, in that particular instant, the session is actively running a SQL statement. The vast majority of the time, a database connection will be idle as it waits for a user to decide what to do next, for the client application to process the data that was returned, etc.
    If you're not encountering any problems, I wouldn't change anything. Setting IDLE_TIME in a profile will kill connections after a period of time, but that may cause problems for users & applications which are not designed to expect that their database connection can be terminated while they were using it.
    Justin

  • Idle session

    hello, what is the different between idle session and active session in oracle?
    is idle session is treated as an 1 user who is currently connected? or user who is not connected to the db.
    because on my session monitor, there's a lot of idle

    HI,
    idle session
    User connected to database but doing nothing then there session is called idle session.
    You can limit the idle time for a session. If the time between Oracle calls for a session reaches the idle time limit, then the current transaction is rolled back, the session is aborted, and the resources of the session are returned to the system. The next call receives an error that indicates the user is no longer connected to the instance. This limit is set as a number of elapsed minutes.
    active session
    user connected to database and doing there session is active.
    active and inactive session
    A session is ACTIVE when it is making a SQL call to Oracle Database. A session is INACTIVE if it is not making a SQL call to the database.

  • Oracle idle sessions

    Hi Gurus,
    I need to learn more about Oracle idle sessions, why/how they are created and why some of the idle sessions does not terminate easily.
    Is there any ways to determine which SQLs are responsible for idle sessions. Also SQL way to identify and destroy idle sessions.
    Does this make sense.
    Thanks
    Amitava.

    First, why do you believe that idle sessions are a problem?
    A session is IDLE if it is not, at the instant you query the data dictionary, executing a SQL statement. Most sessions will be idle most of the time because most of the time your applications are waiting on humans to do something or spending time processing data in the application. Just because a session is idle now is no reason to believe that it won't be ACTIVE shortly.
    A modern three-tier application will generally create a pool of connections to the database on each middle tier server. Generally, those pools will be sized for at least reasonably busy conditions. If you happen to look at the database when the application isn't particularly busy, you're likely to see a bunch of idle sessions. That's not a problem. While you could force the application server admins to decrease the size of their connection pools, that may negatively affect the performance of the applications and introduce extra load on the database server for no real benefit.
    Justin

  • RemoteApp Session Time Limit

    Hi,
    I'm a Windows Server 2008 R2 user. 
    I'm looking to terminate a remoteApp session that is left idle.
    I have already change the "Set Time Limit for Active but idle Remote Desktop Services Session to 1 minute" and i have also enabled "Terminate Session When time limits are reached" for both Computer Congfiguration and User Configuration. 
    Other Session Time Limits options are not configured. 
    After doing so, i did type gpupdate in the command prompt. 
    But whatever changes i make, doesn't have any effect on the RemoteApp. 
    Please to help to advice,
    Thanks,
    Jvarman

    Hi,
    Thank you for your post in Windows Server Forum.
    As you have already configure Session Time Limit group policy, you need to apply other group policy related to RemoteApp that is “Set time limit for logoff of RemoteApp sessions”. You can specify the time limit for RemoteApp to disconnect.
    The setting is under the same path which you have provided for Session Time limit. 
    Note: We recommend that you set other session limit policy settings that end the session to a time limit that is higher than the RemoteApp logoff delay policy setting. If this is not the case, there is a possibility for conflict.
    More information:
    Terminal Services RemoteApp Session Termination Logic
    http://blogs.msdn.com/b/rds/archive/2007/09/28/terminal-services-remoteapp-session-termination-logic.aspx
    Hope it helps!
    Thanks,
    Dharmesh

  • Kill idle session automatically

    dear experts
    How to kill idle/inactive session automatically, based on its idle time?
    Which parameter should change?
    what is the relation between session, process ,thread.
    plz reply

    To kill idle session automatically, create a profile with idle_time parameter and assign it to the involved user accounts:
    http://www.psoug.org/reference/OLD/profiles.html?PHPSESSID=d47ba8ea1ed4aa759bea200eb397609c
    From Concepts Guide http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/process.htm#sthref1475
    A session is a specific connection of a user to an Oracle instance through a user process
    Edited by: P. Forstmann on May 27, 2009 10:01 AM

Maybe you are looking for