IDOC/BAPI/FM for T.code VV21 to uplaod using LSMW
Hi Friends,
IDOC/BAPI/FM for VV21:
create output condition record for : Shipping
with Key-comb of Deliv.type/Ship Point/Ship-To Pt.
Regards,
Sivaram.
Hi Ferry Lianto,
Thanks for answer,
But i need to maintain Communication also for OUTPUT.
Like PRINT or FAX or EXTERNAL SEND.
i am passing values from these fields.
KSCHL LFART WERKS KUNWE PARVW PARNR NACHA VSZTP SPRAS LDEST ANZAL DIMME TDDELETE TDFORM TDSCHEDULE FAXTITLE DIMME TDDELETE TCODE,
i planned to go for BDC recording.
Thanks,
Sivaram.
Similar Messages
-
IDOC/BAPI for T.code PIC01 to uplaod using LSMW
Hi friends,
I want to upload the data for T.code PIC01. can any one worked using IDOC/BAPI to uplaod using LSMW.
Thanks,
Sivaram.What T-code is that PIC01??
--Ragu -
IDoc / BAPI / FM for posting Credit information (FSCM)
Hi All,
Is there any IDoc or BAPI or FM for posting customer credit information like the credit score (or the credit rating), paydex, ram score, financial strength score ?
Also let me know if there is any other way of posting this information into SAP.
Thanks,
Sushil Joshihey
check this BAPI may be useful for you
BAPI_ACCSTMT_CREATEFROMBALANCE
or
BAPI_ACCSTMT_CREATEFROMPREVDAY Create Bank Statement/Day-End Statement
BAPI_ACCSTMT_CREATEFROMSAMEDAY Create Bank Statement/Today's Data
check EB_BANK_STATEMENT_INSERT
~~Guduri -
Dear Experts,
I am facing a problem while posting Intercompany invoice through IDOC (intercompany invoice i.e. purchase invoice against the billing document).
the billing document, my accounting entry get generated correctly as per the below:
Posting key Account Description Amount Text
01 C6000 Intercompany IFTSPL 734.36 Intercompany Customer
40 303001 Comm Exp-Activation 15.75 Commission
50 149000 Card Liability 750.00- GL Account
40 263910 ST Input - Basic 1.58 ST Input - Basic
40 263920 ST Input - Ecess 0.03 ST Input - Ecess
40 263930 ST Input - SHECess 0.02 ST Input - SHECess
50 145530 TDS - 194H Comm 1.74- TDS
Commission in involved in the above due to which TDS is applicable & all the data is fetched from the pricing procedure.
but while posting intercompany invoice, the accounting entry(line items, calculations)are getting generated correctly but the posting is done to a wrong GL, it should post to the same GL as per the billing documents.
wrong entry is as per below: please see the "Account" which is common for
Posting key Account Description Amount Text
40 300001 ItzCash Card (GL) 750,00 GL Account
50 303011 Comm Inc-Activation 15,75- Commission
50 303011 Comm Inc-Activation 1,58- Service Tax
50 303011 Comm Inc-Activation 0,03- Service Tax Ed Cess
50 303011 Comm Inc-Activation 0,02- Service Tax H Ed Ce
40 300001 ItzCash Card (GL) 1,74 TDS %
31 C2000 ITZ Company 734,36- Vendor
So please let me know where i can assign my Tax GL so that system can fetch that data for posting.
Thanks in advance.....Hi,
You have to change in the Dev. and send as a export to the QA and then it's been transferred to PRD.
Hope this helps.
Please assign points as a way to say thanks.
Harish -
IDoc - Segment details for Confirmation Code in ME22N
Hi Friends,
I am doing Purchase Order Acknowledgement(855) - Inbound Scenario. I need the ConfirmationCode and Confirmation ControlKey fields in the segement of basic type ORDERS05. We couldnt find these two fields in the segments, can any one help me to find out the solution.
Regards.
SelvaHi Selva,
add these 2 fields and create a segment in WE31. Add this segment to extension idoc in WE30.
Link the Ext.idoc to msgtype in WE82.
Try to fill the data at userexit level for added fields.
Thanks
Eswar -
IDoc - Segment Details for Confirmation Code
Hi Friends,
I am doing Purchase Order Acknowledgement(855) - Inbound Scenario. I need the ConfirmationCode and Confirmation ControlKey fields in the segement of basic type ORDERS05. We couldnt find these two fields in the segments, can any one help me to find out the solution.
Regards.
Selva.Hi Selva,
add these 2 fields and create a segment in WE31. Add this segment to extension idoc in WE30.
Link the Ext.idoc to msgtype in WE82.
Try to fill the data at userexit level for added fields.
Thanks
Eswar -
Looking for sample code of HOW-TO use EntityFacadeImpl class
I have created the following using JDeveloper Ver 9.0.3.1:
1. Entity Bean
Localinterface: userLocal.java
Local home interface: userLocalHome.java
Remote interface: user.java
Remote home interface: userHome.java
Bean implementation: userBean.java
2. Facade Session Bean (auto generated by JDeveloper)
userFacade.xml
userFacadeColImpl.java
userFacadeImpl.java
I am looking for sample client code on how to make use the facade session bean.
Thanks in advance.repost
-
Pse8 and Premier asking for license code after weeks of use.
I have been using pse for several weeks and suddenly today it starts with an adobe organizer screen and wants to know if I want to use the trial or enter my code. When I enter my license code, it puts a red x after it and won't take it.
If I try to continue, I get a message saying it had a problem loading the trial version.
I have put in a case, but if like last time, it will take days, so thought I would ask here.
Thanks,
Don
Image of screen.Hi Don,
I apologize that you have been running into these issues again and again. This shouldnt have happened.
Ideally if it is working once, Organizer should not ask for the serial number again. This is the first time I am hearing that someone is running into Organizer throwing serial number screen again and again.
Did you by any chance have deleted the files or folder at the below location?
C:\Program Files\Common Files\Adobe\Adobe PCD\
Or another reasoning which I can think of, is that in the durations while you are not using PSE, you are running some other application which is in turn taking away the permissions to read the files present at the below location and PSE on lanuch is not able to read the information it needs. Can you please check that? if there is any application which you think might be the culprit you can let me know and I can try to reproduce the scenario at my end.
The only workaround for now, would be to again uninstall and install PSE....sorry again for the inconveniences..
Regards,
Ankush -
Idoc/BAPI for Certificate Profile creation
Hi,
Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code QC01).
Appreciate your Inputs.
Thanks.
Regards,
PcBAPI_USER_PROFILES_ASSIGN Change User-Profile Assignments
SUSR_BAPI_USER_PROFILES_ASSIGN Methods of object USER
Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM -
Standard or Customizing Bapi for T-code F-44
Hi
I need to clear vendor open invoices using BAPI's for T-code F-44 .I've got through various FM like <b>bapi_acc_document_post</b> and <b>bapi_ar_acc_getbalanceditems</b> but could'nt find solution because this FM's are for customer clearing the open items from table BSAD(cleared accounts of customer).Have any boby worked on this tcode to clear vendor accounts using bapi's or do we have any standard FM to use the scenario same as FM mentioned above for table BSAK(vendor clear items).
Its really simple working with bdc's to transfer data from flat file to the above transaction.But as known every vendor has huge sets of items and this could be a huge performance issue....so to avoid this in future we need to work on this using exclusively BAPI's......Any suggestions or sample codes wud surely be appreciated....
Thanks in Advance......hi,
look here
Re: BAPI for transaction F-03
<b>Reward points</b>
Regards -
Hi
I need to clear vendor open invoices using BAPI's for T-code F-44 .I've got through various FM like <b>bapi_acc_document_post</b> and <b>bapi_ar_acc_getbalanceditems</b> but could'nt find solution because this FM's are for customer clearing the open items from table BSAD(cleared accounts of customer).Have any boby worked on this tcode to clear vendor accounts using bapi's or do we have any standard FM to use the scenario same as FM mentioned above for table BSAK(vendor clear items).
Its really simple working with bdc's to transfer data from flat file to the above transaction.But as known every vendor has huge sets of items and this could be a huge performance issue....so to avoid this in future we need to work on this using exclusively BAPI's......Any suggestions or sample codes wud surely be appreciated....
Thanks in Advance......Thanks for ur response Anji Reddy garu,
I've tried to check up this given FM but could'nt find it here in my sap system both in QAS and in DEV more the FM <b>Bapi_payit_post_clearing</b> is also not available here in my sap system what could be the problem it should display this standard FM if available right but its say FM does not exit......Can u do me a favour of forwarding the source code for both the FM's so that i can create a new customizing FM if its fits my requirement..... -
Looking for standard IDOCs for Currency Codes and Product Hierarchy
Hi,
Does anyone know what the standard outbound IDOCs there are for Currency codes and their descriptions and for the Product Hierarchy and their descriptions?
CheerHi,
I don't know about Product Hierarchy but if you want to send Currency codes
I believe the easiest way would be to create an raport with a select statement that would invoke an ABAP Proxy to send those codes with descriptions
Regards,
michal -
BAPI or FM for Supply Area - PK05 using LSMW
Hi Folks,
I am transfering Supply area records (T-code PK05) to SAP using LSMW Recording method. But I am getting some errors.
Can any one mention any FM or BAPI or IDoc or any Batch Input or Direct Input Program for Supply area?
Thanks in Advance,
Asif Ali KhanHi,
Here is the thread which will give you the BAPI as well as the Function module
BAPI for CJ02
Regards
Sudheer -
Error in BAPI RETURN for Service Contract
Hi,
I get an error in the BAPI Return for the Uploading the Service Contracts by LSMW. The Error Message is E BS No status object is available for &.Also want to know can we upload multiple line of header text for a Contract by this BAPI. If so then how would I do this , as the BAPI structure BAPISDTEXT has textline upto 132 characters. And I am take only one file in LSMW where the header & details come alongwith text. Or could also tell me the file structure of for the data upload. The legacy system sends multiple text in the header for a Contract.For Eg.
Header1 Detail1 Text1
HEader1 Detail2 Text2
Header1 Detail3 Text3
So I would need this text1TEXT2text3 in the Header Text of the Contracts. Or do I need the change the file structure. Many thanks for your time and help.Thanks Nablan, I could do that for multiple header coming in file. But I have a question for you on BAdI ALM_ME_006_GOODSMVT. I have implemented this BAdI , and this BAdI is called by a function Module ALM_MEREP_006_CREATE. When I test this FM giving the Material , Orderid and Movement type entries, this BAdI is triggered when giving a breakpoint. I've given this code for changing the movement type to 961. Cause the stanadrd scenario does not maintain Movement type 961 in Mobile Asset Management. The Movement type 961 for unplanned Materials comes to SAP and changes to 261 as maiantained by TCOKO table. To bypass this & retain the movement type 961 in SAP I'm using this BAdI. Currently this is what I'm doing and am stuck in the method interface how do I call the method.
method IF_EX_ALM_ME_006_GOODSMVT~CREATE .
break-point.
*DATA : i_ce_goodsmovement TYPE REFERENCE
ALM_ME_CUSTOMER_ENHANCEMENT.
DATA : lr_badi_goods_movement TYPE REF TO if_ex_alm_me_006_goodsmvt.
DATA : ls_user_data TYPE ALM_ME_USER_DATA-USERID.
*DATA : goods_movement TYPE ALM_ME_MATERIAL_MOVEMENT.
CALL METHOD lr_badi_goods_movement->create
EXPORTING
ce_goodsmovement = ce_goodsmovement
IMPORTING
user_data = ls_user_data
custom_user_data = ls_ce_user_data
goods_movement = goods_movement
changing
return = return[].
CALL FUNCTION 'ALM_ME_COMMIT_OR_ROLLBACK'
TABLES
return = return.
endmethod.
Please help me to get the data in this method. How do I call this. -
Bapi fm for the transaction FS10n
Hi friends,
Can any ine tell the bapi fm for t code FS10n.
Thanks ,
AnkithaIS There is any Function Module available Exactly Like FS10N selection Screen as it is Having Business area as well . I want to get G/L Balance with the Business Area as an Input.
Please help me As soon as Possible .
Thanks In Advance
Maybe you are looking for
-
Apple TV bricked after v6.0 Update Help Requested
My AppleTV was working before the v6.0 update. When I updated it I noticed it took a long time. It seemed to go ok but it then rebooted and showed to connect to iTunes. Never saw that before so I did a little Googling to figure out what was the cause
-
There is no button under my security questions to send then to my email?
There is no button that asks if I forgot my answers?
-
I just realized my iPhoto Trash won't empty. When I click on it the software crashes. There are about 800 images in the Trash. I tried restoring about half of them to their albums and then emptying Trash -- but same thing -- Crash. Any suggestions? T
-
Read system datasource in the moment "action success"
Hi all, For example i have a goods receipt po form open with data.I push add button.Its posible to read from the datasources(OPDN,PDN1) of form in the moment of the action succes. What is the best way to obtain the head and lines data of the created
-
HP MINI 5101 problem with instaling XP SP3 with Usb Hard disk
i have problem formatting and installing windows XP SP3 with my usb hard disk on HP Mini 5101 my laptop wont read my usb anyone have any suggestions??? please help