Idoc from XI to R3 losing fields and segments

The idocs I have posted from XI to R3 seem to lose some of the fields and segments.
The idoc is sent correctly from XI but the idoc posted in R3 have less fields and segments.
Any idea?
Thanks

Hi,
Check in transaction IDX2. You may need to delete the Idoc Type Metadata from IDX2 and then resend your XML file to XI. It will then generate the new metadata.
Also, there was once when we encountered this case but simply deleting it from IDX2 did not fix the problem. We then deleted the entry directly from the table IDXEDSAPPL and that fixed the problem.
You may also want to refresh your XI cache via tcode SXI_CACHE.
Thank you.
Best regards.

Similar Messages

  • Change description of value fields and segment level chars in prod system

    Hi
    1 . We would like to change the description of some value fields.... We would like to know whether the change has to be carried out directly in the production client by opening the client using SCC4 or we should change the description in development client and transport it to production...
    We are afraid that if we transport the operating concern again from dev to production system using KE3I, it may affect the transaction data which is already lying in the production system
    2. We would also like to create and include some new fields as Segment level characteristics in COPA... What is the proces for the same and whether the same has to be done directly in production or transported from dev client
    3. Some value fields which were copied in our operating concern from a template of Air line Industry, are not suitable to oour business. So we are trying to change their description.. But SAP does not allow to change the description of thes value fields..
    Only those value fields which were created by us starting from VV***, can be changed.. Description of those delivered from the template, cant be changed. What is the process of doing the same
    Regards
    Ajay Maheshwari

    Hi
    When the Operating concern was copied from Airline Industry, many standard chars which are not applicable to Airline Industry were not copied.... For eg: Material group 1 to 5... These are std fields of Mat master which normally exist in Operating concern when I used to create it manually.... Many other chars reqd by the business are not available
    Someone else copied it using Airline template and many reqd chars are not available at all... I have the option of creating User defined chars for it and write a derivation rule to populate it... 
    Though COPA is active, my client does not use it as of now in ECC 5.0.. They would like to use it post ECC 6.0.. So, I thought its better to start afresh than carrying forward the mistakes done by someone else.. They are OK with this model, but I wanted to be sure what all issues can be faced due to this
    Regards
    Ajay Maheshwari

  • Extract Year (only) from Date Field and Display in Text Field

    I need to extract the year from a user entered date field and display the year in a text field. Can someone help me with the correct script to do this?

    Hi,
    that's quite easy to realize with FormCalc.
    In you date fields exit event add the following code:
    textField1 = Num2Date( Date2Num($.formattedValue, "MM/DD/YYYY"), "YYYY")
    Note: This sample assumes that your date field formats the date with "MM/DD/YYYY". You may have to change the pattern to make it work at your end.

  • Drag image file from portfolio pdf into image field in reader

    I'm new to the Adobe world and this is my first project. I'm not sure if this is even possible, but here's what I'm trying to do...
    One document is a PDF portfolio with 200 images (jpg or tif). Each image in the portfolio will have a description. The second document is a PDF form created in LiveCycle. I want to be able to (from Reader with rights enabled) import the image from the portfolio into a field and have that image displayed along with the description all inside the form. Thanks so much in advance!
    Gabe

    Hi, I'm using CS4 and would love to be able to drag n drop straight to a new layer in an existing file.
    At present when I drag n drop I get a new image in PS. I then have to move this to my existing image. I have tried draging to the tab, the layer box, the image, the blank space, using shift,ctrl & alt.
    A simple how to would be nice

  • "An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

    Hi all,
    While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
    Only a particular Idoc type is having this issue.
    Below are the checks done before posting this query:
    1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
    2. Reloaded the meta data in PI for  the particular Idoc type in issue.
    3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
    4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
    5. Restarted the inboundRA service in PI AEX.
    Is there anything still missing. What could be root cause of this issue.
    If anyone has encountered it before, pleases share the resolution.
    Thank you
    Younus

    Hi Amit,
    Thanks for the reply. Log viewer doesn't provide much help on the error.
    The error desc says
    "JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
    regards,
    Younus

  • Idoc- File scenario: Read a data field in IDOC and name the file with it

    Hi All,
    I am configuring an IDOC to File scenario.
    I have a requirement where I need to read one of the IDOC data field and use that as the name of the File.
    E.g: If the IDOC data field-1 = '123456', then I need to name the output file as '123456'.
    Is it possible to do this. Appreciate your help on same.
    Thanks
    Shirin

    Try this code..
    desired field from IDoc will be input parameter to UDF
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    conf.put(key,a);  // a is input parameter
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    Also, check Adapter specific message attributes in file adapter, check  filename

  • Idoc enhancement with new fields and refresh in MII 12.1

    Hello all,
    I'm using one standard idoc LOIPLO to transfer planned orders from ERP to SAP ME 5.2
    I have enhanced this idoc to add some new "custom fields" -> On the ERP side I can see my new fields in the idoc, but when idoc is received in MII, I don't see my new fields (it's still the "old" idoc version). In 5.1, I remember that we had to stop/start the message listener in MII and new fields were available, but in 5.2 it does not work.
    -> Message listener is now configured at Netweaver level and we stop/start it, but the new fields are not in.
    Any idea how to "refresh" the idoc version in MII ?
    Thanks and regards,
    Michaël.

    Restart the NW server
    Restarting the Java process should be enough...
    Perhaps also via the "cache refresh" tool normally used for Webdynpro stuffs...

  • Since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists

    since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists?

    My own opinion is that you should install the later appropriate version of Silverkeeper. That said, I would in fact recommend if you can wait a few days for an answer, that you email the La Cie Silverkeeper backup team via the email link on the site at http://www.lacie.com/silverkeeper/
    They are careful to say they are not officially providing a backup service, but when I emailed them with a query regarding usage about a year ago after downloading Silverkeeper for myself, I got a reply within a couple of days that cleared up my question.

  • I have an ipod classic and I did have a macbook pro but it crashed.  Is there any way to transfer the music from my ipod without losing everything on the ipod.  Because my new computer is a pc it wants me to reset my ipod but I will lose everything.

    i have an ipod classic and I did have a macbook pro but it crashed.  Is there any way to transfer the music from my ipod without losing everything on the ipod.  Because my new computer is a pc it wants me to reset my ipod but I will lose everything.

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • How to trigger an Idoc from Sales order creation and change

    We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
    Follow the below steps:
    1. Go to NACE transaction
    2. Select V1 application and select OUTPUT TYPES
    3. Select the required output type and double click on Processing routines.
    4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
    5. Save it.
    message type ORDERSP in the distribution model (BD64).
    Follow the below steps to configure the condition records:
    1. Go to NACE
    2. Select V1 application and select CONDITION RECORDS
    3. Select the requred output type and click on Condition records
    4. Selection screen will be displayed.
    5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
    Sales doc type = OR
    Funt = SP
    Partner = blank. It means there is no restriction on partner numbers.
    Medium = A
    date/time = 4
    Lan = EN.
    Note: partner is left blank means, the sales order of type OR can be send to all partners.
    6. Save it.
    We also done ALE configuration.
    We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
    Kindly suggest the solution.
    Regards,
    Sharad Dixit

    Hi ,
    Please check the total error description and diagnosis as below :
    InVa02 enter SO  go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
    Please paste the diagnosis .
    Thanks and Regards,
    P.Bharadwaj

  • I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    I am moving from PC to Mac.  My PC has two internal drives and I have a 3Tb external.  What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

    Paragon even has non-destriuctive conversion utility if you do want to change drive.
    Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
    www.paragon-software.com
    Some general Apple Help www.apple.com/support/
    Also,
    Mac OS X Help
    http://www.apple.com/support/macbasics/
    Isolating Issues in Mac OS
    http://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/
    https://www.apple.com/support/quickassist/
    http://www.apple.com/support/mac101/help/
    http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    Apple Mac App Store
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
    How to Buy Mac OS X Mountain Lion/Lion
    http://www.apple.com/osx/how-to-upgrade/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    http://www.apple.com/support/timemachine
    Mac OS X Community
    https://discussions.apple.com/community/mac_os

  • How can I get text from a text field and display it in an alert?

    Hello!  I am BRAND NEW to Objective-C and Xcode and iOS, so PLEASE be forgiving of what is going to be a stupid question.  I have a text field.  I want to enter some text, click "return", and see my text in an alert.  It doesn't serve any useful purpose, but this is how I learn.  So far, I am unsuccessful.  Here's my function from my HelloEarthViewController.m file:
    -(IBAction)showInputMessageUITextField *)textField
    if ([textField.text isEqualToString:@""])
        return;
    UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                         initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textField.text]
                                         delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
    // Display this message.
    [helloEarthInputAlert show];
    Then I go option+click the text field and drag it to File's Owner and connect it to "showInputMessage:"  Then I run it and the build succeeds, but nothing happens when I click my "return" button on the iPhone simulator.
    What have I missed?  Where have I gone wrong? 

    Okay, here's where I am.  I have this in my view controller .h file:
    @interface HelloEarthViewController : UIViewController <UITextFieldDelegate>
        IBOutlet UITextField *textFieldTest;
    @end
    And this in my view controller .m file:
    -(IBAction)showInputMessage
        if ([textFieldTest.text isEqualToString:@""])
            return;
        UIAlertView *helloEarthInputAlert = [[UIAlertView alloc]
                                             initWithTitle:@"Name!" message:[NSString stringWithFormat:@"Message: %@", textFieldTest.text]
                                             delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil];
        // Display this message.
        [helloEarthInputAlert show];
    And I have connected the text field to showInputMessage.  When I hit "return", however, I still get nothing.
    Is an "action button" a real button?  From my limited understanding, the alert should launch when I click "return" since showInputMessage is attached to Editing Did End on the text field.
    Thanks for the help.  The transition from writing C# for web applications to writing Objective-C for iOS applications is not going as smoothly as I'd anticipated.

  • Arbic fields and english fields are mixed in exported data from oracle

    I have a oracle db with character set UTF8.
    I have exported some data from a table with arabic detail through sqlplus
    and saved in a text file.The file is | sepereted.
    I can view this file properly while using textpad.
    But in note pad the arbic fields and english fields are mixed.
    I have anothe application which is accept the data from note pad only.
    so i am not able to export arabic data properly in notepad.
    Can any one help from this issue.?
    Thanks,
    nash

    Thanks for your reply.
    i have saved the file in UTF8 format and still the same.
    i will explian you the real issue.
    We have one Dot net application and we need to upload some data to this application.
    I can upload the data which is contain only English detail.
    But i am not able to upload the arbic detail.So i ve checked the application and the data which i am uploading to this.
    And i found that the data which i am uploading is mixed with arabic fields and english fields.
    There is a field seperation in my data which is '|',So i can see some arabic field is mixed with some other english field
    if i open the file through internet Exploreer or notepad able to see the mixed field detail.
    But i can see the data in textpad are correctly.
    The upload data file is taking from oracle database through toad.
    I have tried with SQL plus also.But still the same.
    Please help me out from this issue?

  • Remove particular field and button from a screen when using pnp

    hi,
    i came to a request of remove a field and button from the displayed screen. i developed the report using logical database pnp. i need help.

    There are a couple of ways to accomplish this.
    1. Use a report category so that the only fields on the screen are those that you want.
    2. Do something like this:
          LOOP AT SCREEN.
        IF SCREEN-NAME = 'PNPTIMED' OR
           SCREEN-NAME = 'PNPBEGDA' OR
           SCREEN-NAME = 'PNPENDDA'.
          SCREEN-ACTIVE = '1'.
          SCREEN-INPUT = '0'.
          SCREEN-OUTPUT = '1'.
          SCREEN-INVISIBLE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.

  • Getting Error in SM58 and IDX2 while using IDOC from

    Dear All,
    Getting error when trying to send FIDCCP02 Idoc from ECC to PI system.
    "Basic Type 'FIDCCP02' is unknown"
    Getting the same error while trying to import metadata using IDX2 from PI side.
    All connections and distribution model are created.
    Please help
    Regards

    hey,
    I checked all config again but getting error while checking ocnsistency in BDM5 on ECC system(E1Q).
    It is failing when the messge type FIDCC1 reaches PI QA (X1Q) system and the error states
    Message type FIDCC1 is not defined
    Please check last line of below message:
    E1QCLNT001     Checks in own system E1QCLNT001          
         Message type     @08\QCheck OK@     Message type FIDCC1 is defined
         Segment filtering     @08\QCheck OK@     No segment filtering
         Conversions     @08\QCheck OK@     No conversion
         Partner profile     @08\QCheck OK@     Partner profile has been created
                                      @08\QCheck OK@     .....Port PI_QA
              @08\QCheck OK@     .....Port PI_QA
              @08\QCheck OK@     .....Packet size 0001
              @08\QCheck OK@     .....Basis type FIDCCP02
              @08\QCheck OK@     .....enhancement
         Port     @08\QCheck OK@     Port PI_QA : To PI Quality System
              @08\QCheck OK@     .....Port type: Transactional RFC
              @08\QCheck OK@     .....port version 3: IDoc record types from Version 4.0 onwards
              @08\QCheck OK@     .....Logical address (destination) X1QCLNT001
         Logical address (destination)     @08\QCheck OK@     Logical address (destination) X1QCLNT001 is defined
    X1QCLNT001     Checks in partner system X1QCLNT001          
         Check of own logical system     @08\QCheck OK@     Own logical system is X1QCLNT001
              @08\QCheck OK@     Logical system is the same as the target address
                       Message Type     *@0A\QCheck resulted in error@*     Message type FIDCC1 is not defined
    When I am clicking on error it is taking to WE81 on PI side.
    So do I need to add this message type in PI system as it is present in ECC side?
    Thanks
    Edited by: Chanakya Sharma on Dec 10, 2010 12:10 PM

Maybe you are looking for