How to trigger an Idoc from Sales order creation and change

We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad Dixit

Hi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj

Similar Messages

How can we trigger an IDOC based on Orders creation.

Hiii...experts,
After searching alot in SDN i am taking this very commonly asked to experts in the hope of a better understanding.
If i create a sales order means.. i want to trigger a IDOC based on certain Condition on ORDER data .. how can we do this..
when ever i'm creating a sales order it should be automatically trigger a IDOC , Because when ever sales ordre was created in R/3 system it should be transferred to some destination...
And pls tell me about the reports that does the job of collecting required data from the sales order and converts it into a IDOC.
so, how can we trigger an IDOC based on Orders creation..
pls help.
Ram.

Use IDOC_OUTPUT_ORDERS for creating IDOC
you need to maintain condition records & output type
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 4:18 PM

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

How to Overrride ATP values during sales order creation

Hi all,
How i override ATP values during sales order creation.
The scenario is that we need to migrate open orders from an existing legacy system to SAP.
While migrating these orders, we need to make sure that dates on the schdule lines are same as they are in the old system. Hence we need to override ATP.
Any suggestion welcome..
Regards,

Hi Kantur Shekar madhuri,
Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
if not please activate and re run your scenario.
Regards
Arun

How many table are affected when sales order creation(O2C)

Hi all,
HOw many table are affected when sales order creation, can any one please help ,and please give me a description indepth please please. I know some of the table affected
Thanks&Regrads,
Surya

Hi Kantur Shekar madhuri,
Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
if not please activate and re run your scenario.
Regards
Arun

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Regarding UserExit in sales Order creation(VA01), change(VA02)

*Hi Gurus,*
we are having one requirement that we have to change User status at item level in sales Order creation(VA01), change(VA02) according to certain condition( condition is if user status at item level is 'SGUC' then we need to get item category and with this item category we have to find new user status from our custom table).
*So is there any FM or user-exits to set the User Status of the Sales Order Line Item at the time of Order Creation(VA01) or Change sales order(VA02) but before saving.*
*looking for your inputs.*

Check,
In include MV45AFZZ
Routine USEREXIT_SAVE_DOCUMENT_PREPARE
In include RV45PFZA
Check with USEREXIT_SET_STATUS_VBUK , USEREXIT_SET_STATUS_VBUP

Function module which uses both BAPI's for sales order create and change

Please name the function module which uses both BAPI's for sales order create and change.
BAPI_SALESORDER_CREATEFORMDAT2
BAPI_SALESORDERCHANGE

Yup.
you must write a piece of code for this.
with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
logic somethig like this.
Amit.

Is there a Business Object for Sales Order Create and Change VA01 and VA02

Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
Mark

Hi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM

How to tigger SISCSO01 Idoc for sales order confirmation

Hello Experts,
I have a requirement where in I need to send the sales order confirmation as an IDoc. I need to use SISCSO01 IDoc type for that.
Can any please tell me how to configure SAP to trigger this IDoc when ever a sales order is confirmed.
In which T-Code is this sales order confirmation is done? and how to trigger the IDoc?
Thanks,
Suma

Hi Suma,
We need to maintan BD64 and WE20 with the Idoc SISCSO01 type. This is will automatically trigger the Idoc when we create a sales order.
You need to matain NACE for tiggering the IDoc. For that use BA00 in output types and configure program RSNASTED, from rotine as ALE_PROCESSING. In default values give transmission medium as ALE and parter function as SP.
Then come back to NACE-Condtion records and maintain meduim as A and date as 4.
Please reward if helpfull.
Thanks,
Srikanth

How to Skip weight data from Sales order for Higher level BOM material

I have maintained a BOM at Item level with item category group LUMF.
And the higher level item is not subjected for pricing and costing. While creating the higher level Item I did not maintain weight for it. Now when I create a sales order due to the incompletion log system is asking to maintain Weight details for higher level item also.
But I donu2019t want to maintain weight for that item nor I want to remove net weight and gross wt from incompletion log.
While creating higher level material with material type FERT and I have maintained LUMF and all things are normal. Also tell me do I need to select any different material type or do I need to go for different settings ?
I hope my query is clear. Please ask if query is not clear.
Please Guruu2019s suggest me.

Hi ,
I do not know what a reference charactersitcs is,but there are all independant characeristics in terms of their values.
A guess it is because the VC data is changed after the sales order is created, the updated VC data is displayed properly only in VA02 or VA03 but other function modules fail to display the updated VC data.
I understand there is a relationship of instance -between sales order object and VC data object-which we need to update and then see the latest data.
Please let me know if anyone has debgged VA03 to know how the standard SAP program retrieves VC data in a sales order.
Thank you,
Hemant

How to find open item from sales order

Hi all,
my requirement is one sales order is there partial delivery is happened for some materials,take exampla matarial X has 100 quantity in sales order pratial delivery 50 is done, iwant to know the open order qunatity for a material X from sales order.
regards,
kishore.

hi kishore,
in the partial delivery scenario, the sales order items always be a open.
you can see the document flow of that document by using Tcode : VA03 then click on'update document flow' icon. then system will show the status.
i.e sales order is 'being processed'
outbound delivery is completed
billing document is completed
and accounting document in not cleared.
if it is helpful, then give me the points.
Regards,
somu.

Sap afs - how to customize matrix grid in sales order creation

Hello,
can anyone help to understand how to customize the matrix grid shown at sales order creation/change (VA01 - AFS Item overview tab - Matrix entry pushbutton). Here system, starting from inserted material nr, shows all possible combination from material's sales grid. The requirement asks to manage the matrix grid before it is shown to the user.
Thanks in advance for your help
maurizio

Hi
It depends on master data of your material
Max

BAPI for Create PO from Sales Order Data and POST GR from PO created

Dear,
         Can u help me how to create BAPI for Purchase Order creation from sales order Data
          what the bapi to Post GR from the PO created.
Regards,
Manoj

Hello Manoj what you have to do to create PO from PR is that
1) Use   BAPISDORDER_GETDETAILEDLIST (pass sales order number in sales_document table) and then get PR (Purchase requisition number from this BAPI.
2) Use BAPI_REQUISITION_GETDETAIL to get PR items
3) Use BAPI_PO_CREATE1 to craete PO from PR then.
to create goods movement you can use
BAPI_GOODSMVT_CREATE
REWARDS IF USEFUL.

How to trigger an Idoc from Sales order creation and change

Similar Messages

Maybe you are looking for