IDOC inbound Posting Error no 51

Hi Friends,
I am triggering Inbound error using XI.
I am getting Error no 51(Application document notposted), when i am checking in WE05.
Can any one guide me how to trace further error???
Cause of Error????
If data is incorrect in IDOC how can i check, that error is due which field record????
Please guide me and give some T.Codes to trace error in inbound IDOCs
Thanks & Regards
Umesh

the hint with the status record is correct: If you double-click it, you may have a button 'application log' - but only if the inbound processing creates a log.
SAP knows thousands of IDOC basic types, message types, process codes and almost nothing is handled the same way.
So first get the details about Idoc and message types, find out how the inbound IDOC is processed, get the function modules name, use the debugger to see where what error is issued.
You may also have a look at the IDOC's segments contents and see if some data is obviously wrong.
Or just tell the readers here what business process you try to handle using what IDOC - experience may be just one click away.
regards,
Clemens

Similar Messages

How to send Internal table records to Idoc Inbound posting FM to create Ido

Hello Experts,
I have all the data necessary to create shipments in one internal table inside my ABAP program.
I can use BAPI_SHIPMENT_CREATE to create shipments. But associated with this BAPi there is one ALE message type SHIPMENT_CREATEFROMDATA. Now my requirement is to use this message type to cretae my shipments via idocs for one scenario for some of the records in the internal table.
For this message type, I got the inbound function module IDOC_INPUT_SHIPMENT_CREATEFROM from TBDBE table.
Can anybody please let me know how to send the data from the internal table to this inbound function module?
Becasue it has mandatory parameters INPUT_METHOD, MASS_PROCESSING. What values should be passed to these parameters if the data has to be sent to this function module?
Regards.

Hi Ravikanth,
Thankyou very much for your quick reply.
So If I split my internal table data and populate IDOC_DATA and IDOC_CONTROL and pass to the inbound function module directly in my ABAP program, will that be going to create idocs and post shipments?
I mean is it enough to call the Inbound posting function module directly in my ABAP program or any other FMs to be called to take care of ALE settings and shipment creation?
Please confirm.
REgards.

Idoc inbound posting program for CRMXIF_PARTNER_SAVE_M02

Hi Abapers,
Im working on datamigration for Business partner using Lsmw idoc method and getting Idoc status 53 with message crmxif_partner_save function module generated successfully with BP number but some of the entries of the fields is not getting inserted into master table BUT000,can any one put a tip of light what exactly is going wrong as i have taken all necesscary steps if any one can share their views like how to trace the posting program for inbound idoc crmxif_partner_save_m02 and where exactly the data is getting inserted into database table BUT000.
Will appreciate all your help.

Hello,
at first, that would be very useful if you could say which fields/segments exactly are not transfered...
there can be lot's of reasonsd why the fields are not inserted with 53 result status, but in general you can try several points:
1. check if all the fields you want to transport are properly mapped
2. you can try to debug, if indeed your mapping rules are working during convertion
3. do you want to fill this fields in insert (to create new BP) or update mode (udate already created BP)?
etc.
regards,

IDOC Inbound processing error

Hi Experts
While IDOC posting i m encountering an error with status 64 (<b>No resources, Immed. processing not possible. Quota for rdispirfc_max_own_used_wp wxceed</b> )
Can anyone explain the reason behind this.
Regards
DhanyaR Nair

Hi,
This has nothing to do with your IDOC and ideally should not happen on a production system at all.
The work processes processes different tasks in the system like executing programs, background jobs. And you need to have enough for the same.
From a IDOC stand point, you shouldn't be worrying about it.
Regards,
Ravi
Note : Please mark all the helpful answers

Reg: Idoc inbound posting

Hi Experts,
I am trying to post an Idoc into SAP system from PI. There are almost 50 tables in sap, based on the table name one of the field length should be changed. How to check the table name...is it possible to save those table names in PI and compare and then change field length. Please help me....
Thanks,
Srinivas.

>>some tables which accept only of field length 9 others will accept 18
Ideally speaking, this is a constraint on ECC side and they need to handle this. Today, you are posting data via one interface, tomorrow you might have other application/interfaces which post data to same table, how many interfaces need to be tweaked?
We had a similar requirement and changes were made in ECC side to trim down the incoming IDOC as per the ECC table lengths, in this way, any application (not just PI) can post data to ECC without worrying about field lengths.
Having said that, if they still want you to handle this in PI, it can be handled via RFC lookup on ECC.
You can hard-code these values in Message mapping as well, but in that case, if field length changes in ECC, you have to modify PI Message Mappings.
Thanks
Aamir

Urgent: Automate IDOC Inbound/ Outbound

Hi all,
I need to automate the whole IDOC process, inbound and outbound.
For inbound, I need to run or schedule a program that will read all files in a given directory as separate idocs. Note that the filename is not constant, whatever file is in the given directory should be consumed. I don't know if I can use we16 for this still. If I could do this, I just need to schedule RWPOS_PARA_ENQUEUE and I' finished.
For outbound, what do I do for the system to automatically generate IDOCs? I thought if I activate change pointers, IDOCs will automatically be generated if a change is detected. I am using SAP Retail, one of the idocs is similar to matmas but I cant use BD10 for this. The other two idocs are still problems for me.
In short, what do I do to automate eveything?
Thanks so much,
Kenny

Hi Kenny Martinez ,
For Inbound Automation
First attach your idoc to a process code.
In the process code you can tell the system that the specified program should be triggered whenever an idoc of that type comes to the system.
Then you want to have a Z-function module for your idoc processing, if I understand correctly.The steps should be:
1. Create a z function module for idoc inbound posting (copy from a function module idoc_input_*).
2. Set Function Modules as Inbound: - Transaction BD51
3. Assign Function Modules to Logical Messages and Idoc types:- Transaction WE57
4. Create process codes : Transaction WE42, and link the z-function module.
5. Create partner profile: transaction WE20 and attach the message type and process code.
6. In the Z- function module, extract data from the idoc segments, do whatever processing you want to do, and then call BAPI_CREATE_SALES_ORDER_FROMDAT2.
Good Luck and Reward me for the same.
Thanks
Ashok.N

IDOC is posting with Errors in File to IDOC scenario

Hi,
I did the File to IDOC scenario for CREMAS . IDOC is posting with Errors .. i.e. in the status record it was showing 56- EDI: Partner profile inbound not available ..
If I manually process that IDOC in WE19 , then it was processing successfully.. and in the we19 it was showing Inbound Processing : Port Not Maintained but even though manually it was posting fine...
any ideas regarding this will be appriciated.....
Regards
Babu

Please check whether you had done the following assuming your doing File to Idoc
Settings in your Business service for the receiving system
Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
Settings in R/3
WE20 - Add the partner profile for the particular message type cremas and process code.
Your statement
" and that same logical system name had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
Please do mention R/3 Details in the receiver business service or system.
Thnz

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

IDOC WMMBXY outbound - R3 idoc posting error

Hi! All
In a file(inbound) to IDOC scenario using the IDOC WMMBXY.WMMBID02(outbound), i have the following status notification and status grouping is also in red when the idoc is posted to R3...
IDOC: 0000000000605076 Status: Application document not posted
Qty and / or "delivery completed" ind. or final issue ind. are missing
It would be very helpful, if you can let me know ...what i did wrong in the mapping/design.
Thank you,
Patrick

Jones,
The error states:
<i>Qty and / or "delivery completed" ind. or final issue ind. are missing</i>
So please check in the idoc whether you are passing the values for Qty and "delivery completed" or final issue ind. I think to post into R3 you need to have these values.
Regards,
---Satish

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

File to idoc adapter :IDOC IS POSTED IN XI but showing error EDI partner

Hi ,
my interface is working fine but issue is that in Recver R3 system idoc is in errors status 56 (EDI partner profile not available.
I already define business system which is used to send data from XI.
My Business system name is testBsys1 for sender XI service.
In R3 i have created logical system testBsys1
and in we20 already created partner profile testBsys1
and also maintain in bound parameter.
please suggest me where is i am doing mistake.

Hi Mohit,
How is the control record of the posted Idoc made in PI? Check the Control Record of The IDoc that is posted in R3, it is not having correct information.
IF you are not making the control records in PI mapping, then in the receiver IDoc, keep apply control records from payload as checked.
Regards
Suraj

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56

EDI / IDoc : While posting inbound IDocs, IDocs gets into status 56 with message "EDI: Sender port in control record is invalid".
But if I reprocess the same idoc without doing any changes using RBDINPUT and select radio button to processs idocs for status 56, then it gets successfully posted.
So not getting why this stucks for the first time.
Thanks in Advance..........

i fixed this my self

Posting Debit Memo (SO) through IDOC throwing V1213 error msg.

HI Guys,
Debit Memo has been created using the idoc.
Getting the error status in IDOC - 51 - Message V1213 - Condition ZR00 is not allowed as header condition
I am using custom BAPI using SD_SALESDOCUMENT_CREATE FM inside it.
The error is thorwn by PRICING_CHECK FM.
Ironically the idoc is posting successfully when there is only one item, if its more than one.. throwing error V1213.
When I debug it, PRICING_CHECK FM is the culprit.
PRICING_CHECK FM is called 2 times, one per item. During first call the item No. komp-kposn = 0010,
in 2nd call komp-kposn = 0000. thats why its throwing this error in the first place.
But why the item value is 0, during 2nd call.. no idea.. !
Interestingly VBKD table stores the item 0010 and 0000 in its entries.. when I force it to posting successfully in debug mode.
Entries in VBAP are normal.
But when I create the debit memo manually with 2 items, its posting without an error. its accepting condition type ZR00.
Now I turn on the header condition in V/06 for testing purpose only. Now its posting for more than one item..
But I can't turn it on permanantly, as its not recommended by business.
but its posting coreectly in other system where header condition is turned off. !!
Thanx for Ur time..
Cheers

In SD/LE tables, posnr (item) no. 0 refers to the header. So, in VBKD, if you have 0000 and 0010, the SO has one and only one item. In your case, obviously, ZR00 is not intended to be a header condition and can only be applied at the item level... and the only item to which the condition can be applied is 0010.

IDOC inbound Posting Error no 51

Similar Messages

Maybe you are looking for