IDoc looks fine, but "Processing (data packet)" : No Data

Hi dear all:
we trying to loading data from R3 ECC 5.0 into BI 7.0. During the loading process, the status keeps "yellow".
When we checked the Details in the extractor monitor, the message shows in "Transfer (IDocs and TRFC) is "Request IDOC and Info IDoc 1 : Application document posted".
But the "Processing (data packet): No Data. We have checked on R3 in tcodes BD87 with IDoc number."IDoc entries in tRFC queues" shows red light under section of "IDoc in outbound processing".
In IDoc entries in tRFC queues, there is not revenant record for this IDoc. Also we used tcode SM37 to check job execution based on the request number of data loading. The job is shown released.
Can anyone give us some idea about what happened and how can we fix it.
Thank you very much
SF

Geeta,
Try this...heard there needs to be a setting made in T-code..SMWQR ..
U have to register the csa*  queue...try getting more inputs on this...this is what I know abt this..
Hope this helps..
Regards.
Nick.

Similar Messages

  • Since I have installed iOS 6.1.3 on my iPhone 5 I have sometimes problems to start a phone call. Everything looks fine, but no ring tone... A workaround is to stop phone app in the multitasking bar. But this is more than inconvenient ;-) Any solution?

    In this cases everything looks fine, but no ring tone is there and after sometimes the phone informs me that no connection can be estabilished (its a German phone, therefore I am not sure about the message in English systems). A workaround is to stop the telephone app in the multitasking bar (double click on home button, hold the app symbol pressed for some seconds, close app). Next several call work after this.
    I am not sure if an incomming call would work in this mode...
    Faces anybody the same problems or has solution for it?

    Basic troubleshooting
    Restart
    Reset
    Restore with backup
    restore as new if required

  • I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • Why is that when i take pictures with my new iphone 4s they look fine but when i download they to my computer or email them they are upside down? how do i fix this

    why is that when i take pictures with my new iphone 4s rotationally they look fine but when i try to download them onto my computer or email them to others they come out upside down or sideways. how can i fix it or is it an OS issue?

    I have iPad 2 and I am having same problem since I updated to iOS 5. All we can do it is rotate it from computer

  • When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

    When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.  I have tried to adjust the margins and the page setup settings but to no avail.  It used to print fine until recently.  Is there a way to fix it so that the printer prints what print preview shows?

    I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

  • I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

    I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

    Hi Jaap,
    Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
    Thanks
    -Prashanth

  • I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
    Mylenium

  • I converted a pdf to word and when it opens in word it looks fine but in a few seconds it converts t

                   I converted a pdf to word and when it opens in word it looks fine but in a few seconds it converts to multiple spelling errors ?

    Hi Jim,
    I just responded directly. Unfortunately the original PDF is from an old fax or scan. The random ink marks and blotches along with the runny font won't transfer the proper information from PDF to Word. The only thing I can recommend is to re-create the doc so you have a clean copy. As I offered - if you need a PDF of it after you have completed - I'd be happy to do that for you.
    Kind regards, Stacy

  • Range Expander Looks Fine - but cant connect to Internet.

    I connect to the range extender & things look fine, but I can't get onto the Internet.

    What's the model number of the Range Extender as well as the model number of the Router? The Linksys Wireless Range Extender and wireless router or access point’s wireless settings should match in order for them to work properly. You must first identify the following wireless settings of your router:
    • Wireless Network Name (SSID)
    • Wireless Channel
    • Wireless Security Mode (WPA/WPA2 Personal or WEP)
    • Network Key or Passphrase
    Here is the link for setting up the Range Extender:
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=aeb3109289c04de7800546f43771bfe0_3760.xml&pid=80&r...

  • When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

    Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

  • Spool is looking fine but unable to print it with the printer.

    Hi Experts,
    I have created a custom form for the excise invoice.  If I try printing the form from the transaction J1IV, it is creating the spool.  Spool is looking fine and everything is ok.  But If I try to print it through the printer, it is not printint at all. 
    Please help me ASAP.
    Thanks,
    Srinivas.

    Hi Ravi,
    I checked the output also, In the transmission medium it is selected "Print Output" and the Despatch time is "Send Immediately". 
    But one thing, in the General data, for the Access sequence, no value is selected.  It might be the problem ?
    Thanks,
    Srinivas.

  • When I send an email in Thunderbird it looks fine, but when the recipient tries to print it, the font is unreadablly small. Is there a setting I need to fix?

    I have Thunderbird version 24.3.0 downloaded to my Windows 7 computer.
    When I send an email in Thunderbird it looks fine and when the recipient receives it, it looks fine on the screen, but when she tries to print it, the font is unreadably small. This happens on every email I send her, but not other people's emails she receives. It has happened on some of the emails I receive back from her that contain the information I sent her.
    Is there a setting I need to fix or something I can do on my end to address this so this doesn't happen. She is receiving email through AOL online. I believe she is viewing it through either IE or Chrome.

    I recently tried sending myself an email through Thunderbird to another email account to see if that was the case, but the email came in with a font so tiny that it was unreadable. I had chosen a font type and size (arial 10) and just coming into my outlook inbox was virtually unreadable.
    And referring to the person I work with, she doesn't have problems getting anyone else's emails, just ones I send from Thunderbird.

  • Pages looks fine but prints blank

    Using Pages in page layout mode, starting with a blank template, portrait 8.5 x 11.
    The composed page looks fine on the screen but shows up completely blank on the printer. Tried PDF, Preview etc. all blank. The content even shows blank in the printer dialog. I'm baffled.

    Duh! I have (embarassingly) solved my problem!
    Somehow I had left the option "even Pages only" turned on and as there was only a single page I was printing a null set. Unfortunately the print dialog says something like 'using latest settings' and doesn't list them so it took me a while to realize the error. I've only been using a Mac since 1985 after all!

  • PDF file looks fine but prints fuzzy

    Hi, I am making music books for a publishing company and we are having an issue with some PDF's. To let you know what we are dealing with I will provide you with some critical info.
    I recieve 600 DPI scans as PDF's of books with music in them from our production crew. I take these files and I have to edit the layout of music on the last page so that there is room for our barcode. I insert the barcode and resave the file as a flattened 600 DPI PDF again. Then in Acrobat, I replace the old page, with the new page containing the barcode. The new page looks fine on screen, but when printed out it looks very fuzzy.
    I have noticed that this also happens to our barcodes when importing pictures into Quark. I have tried saving the barcodes out as TIFF's and as GIF's (they are high contrast black and white, so GIF's have good quality and very low file size)at 600 DPI. Then we export PDF's from Quark and get the same problem with the fuzzyness.
    Does photoshop have some settings for PDF's that will fix this? I am not even sure why it is doing this in the first place. I appologize for the long explanation but would rather have it be clear the first time. Any help you guys can give me would be great!
    -JP

    Okay thanks for the input, but when i try to import with images, instead of pages, it says there was a program error and it fails to import. Unfortunately I have to do these in photosjop first, because like I said in the first message, i have to edit the music on the page so that the barcode will fit.
    The page is FULL of music, and we cannot simply shrink because that makes it harder for people to read the smaller notes. So I have to move the measures closer together, and sometimes I have to cut out extra space in the measures. If I were to do this in quark I would need to set up several different image boxes and then make sure they would line up properly. It is not very time effecient because I do dozens of these each day.
    I have been playing around with the downsampling options and I am getting better results with that. I will post any progress I happen to find.

  • I am trying to set the airport express with a printer; everything looks fine but I keep getting an error message, any tips??

    Do you know where the error message is coming from? All the set ups looks fine.
    Do you think I should reset everything and start from scratch?
    Cheers,
    JB

    An AirPort Express running firmware version 6.3 must be an old one. The Express is unrelated to Bluetooth, but it is likely that your wireless speaker signal is interfering with the Express's wireless signal. This is a common problem with wireless speakers and the older 2.4 GHz - only Express.
    The cure probably going to require upgrading your Express to a newer model, and using the relatively interference-free 5 GHz band.
    Read: Wi-Fi and Bluetooth: Potential sources of wireless interference
    NB:
    Sources of interference
    Wireless speakers that operate in the 2.4 GHz or 5 GHz band.

Maybe you are looking for