IDOC on receiver side

Hi Guys,
I am setting up connection for sending idocs between to SAP systems. In the test systems everything works fine.
However in the production systems although I have the settings in the same way as in test systems it does. not work.
The idoc is sent from sender side succesfully without error (I check that in WE05). But it is not received on the receiver side (in WE05 there are no idocs).
Can I somhow check if the receiver side was at least connected. Is there any log where I could see where can be the proble,?
I am doing the settings in the following transactions:
SM59 (remote connection works fine here)
BD54
WE21
WE20
I would be grateful for any help.
Many thanks,
Jan

Hello Jan,
check SM58.
Best Regards, Dirk

Similar Messages

Multimapping with IDOC at receiver side

Hi ,
I have a scenario wherein I have a file sender and 2 different types of docs as receivers.Please can anyone explain me this scenario in detail.
Please have a look at these lines "Mutlimapping works only for Adapter on the J2Ee engine as the actual message split happens in the J2EE engine.
As the idoc adapter runs on the ABAP stack, the multimapping will not work with idoc's on the inbound side."
Thanks in advance,
Harish.

use multi mapping and implement a BPM.
Ref:
http://help.sap.com/saphelp_nw04/helpdata/en/42/f3ca2529491bc7e10000000a11466f/content.htm
Also ref: /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Message was edited by:
Shabarish Vijayakumar

Sending an idoc to 1 the of the 2 idocs in the receiver side based on field

Hi,
Am having 1 idoc in sender side SHPMNT05 and 2 idocs in receiver side DELVRY05 and VEHCLE01.
My requirement is to send data to DELVRY05 only when one field in SHPMNT05 is having space in it
and to VEHCLE01 only if having Vehicle no in that particular field.
And to populate DELVRY05,
Need to call a FM with Delivery no and del item details.
Function module has to determine based on the FS scenarios, whether to change the delivery, split the delivery (Create new delivery) based on the reason code.
Take the return values from RFC function module and populate DELVRY05 idoc.
Using conditional operator on that particular field we can map it to root nodes of the idocs and do mapping, i think.
But How can i call a func module for populatng del05.
Help me firends.
Thanks,
Ravi.

You may perform RFC lookup in your mapping to call the function module. Make sure that your function module is remote enabled.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Regards,
Prateek

FCC in receiver side in idoc to file scenario

Hi all,
           I am doing an idoc to file scenario using FCC .I am using FCC in receiver side ,but i am getting my output file in only one line while i want structre to be seprated by new line.for more information i am giving muy file structre.
Record
    header(1to1)
    data    (0 to unbounded)
    footer (1to 1)          header, data, footer are three structre which contain various fields.I have to use fieldFixedLengths as filed separator. I am also using endseperator as 'nl' but its not coming in new line.Please share ur views on this issue.
Regards
Neha

hi neha,
In your scenario
Recordset Structure header,data,footer
header.fieldFixedLengths    = 1,2,3, whatever it is
data.fieldFixedLengths      = similar to header
footer.fieldFixedLengths    = similar to header
header.endSeparator = 'nl'
data.endSeparator = 'nl'
footer.endSeparator = 'nl'
I guess you dont have to do any thing else.
Regards
Pushkar
Message was edited by:
        Pushkar Anand

Configuring IDOC and RFC Adapters in both Sender and receiver side

Hi ,
Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
Similarly for RFC adapters.
Regards,
Sweta

Hi,
>>>Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
kindly try searching for them first yourself (there are tons of docs for that and similar questions)
and come back if you any further issues
Thank you,
Regards,
Michal Krawczyk

IDOC Adapter on receiver side- Third party non-SAP

Hi,
I have never worked on IDOC scenario.can we use idoc at receiver end to send data to receiver third party which is non SAP
Plz answer quickly
Regards,
Sriparna

Hi,
What is the Third-party application you are working on? Is it a web service, a database , file system. etc?
-Supriya.

Creating Multiple Files with different name at Receiver side

Gurus -
Can anybd tell me how to generate multiple files at the Receiver side in the given target directory with different file names?
One source message will contain number "N" using which we have to generate files "N" number of times at the Receiver side.
Kindly help.

hi,
are you following this blog?
provided you have SP>14 and no IDOC/HTTP involved.
and have you got the error you mentioned when testing with sample payload?
from where did you take the payload? if is from SXMB_MONI make sure you dont have <MESSAGE> tags in the payload,generally systems adds <MESSAGE> tags when you do multi mapping.
get the payload from SXMB_MONI right click ->view source payload(this is raw data) and test it.
it should be ok now.
and refer my discussion in the thread ,as I got he same error.
Split mapping created no messages -Mluti Mapping

Append the data in file at receiver side

Hi All,
I want dump the data frm SAP tables. the data is hughe so we are sending the data in slots from ECC like 50K recoerds at a time and after that to collect that i using the append parameter at file receiver side and records are getting appended in file only that is correct
but my one doubt is
let say monday the records get append into file at receiver side and on tuesday again the records will get appended in same file....it will be problem for this i used create parameter with overrite my question if i am using create then we can not use append ........
please suggest...........
Regards

Hi gangadhar,
Append will work like this..
if there is no file ..create the file and if file already exists then appends the data to the existing file..
in your case when you create the file with day i.e file_day ..first time when you send 50K records file will get created..
if you send another 50k in the same then will get appended to the same...
in case if you send the another 50K set another day..then a new file will get create as there is no file available with taht file name
i.e filename_nextday...
Hope this clears all your queries
HTH
Rajesh

Idoc Not received?

Hi
During data loading , I got one Error that Idoc Not received.
What will be the cause of problem and How to resolve it?
Regards & Thanks
Durai

Hi Robert Negro !
I checked , Dump has been there.
How can I resolve?
what will be other causes apart from the Dump?
Thanks A Lot .
Regards
Durai

Problem with Stored Procedure exection in Sender and Receiver side of JDBC

Hi All,
I am facing problem while executing Stored Procedures using sender and receiver sides of JDBC adapter.
Here is my SP in Oracle DB :
PROCEDURE EMP
( ID IN VARCHAR2,NAME IN VARCHAR2,PROCESSED IN VARCHAR2 ) AS
BEGIN
   INSERT INTO EMPLOYEE VALUES (ID, NAME, PROCESSED);COMMIT;END EMP;
Now I want to execute this SP using sender JDBC channel and receiver JDBC channel.
Can anyone please help me executing this SP?
Regards,
Soorya

Hi Soorya,
The receiver Data type should be like this:
<StatementName>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName>
Check the link http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
Which DB are you using?? The sender structure will be like
<resultset>
<row>
<field1></field1>
<field2></field2>
<field3></ field3>
</row>
</resultset>
Search SDN you will get lot of examples
Regards
Suraj

Mandatory fields in receiver side

Hi Experts,
Is there any easy way to find out, what are the mandatory fields(receiver side) we have to map during mapping?
Regards
Sara

Basic question
Sender side :
1. Sender1_Root
2. Sender1_Child1
3. Sender2_Root
4. Sender2_Child1
Receiver Side:
1. Receiver_Root
2. Receiver_Child1
3. Receiver_Child2
1. Sender1_Child1 is mapped to Receiver_Child1
2. Sender2_Child1 is mapped to Receiver_Child2
In this case, Do we need to map the Sender1_Root and Sender2_Root to Receiver_Root?
Regards
Sara

Passing Changed extended fields using ALE-IDOC to receiving system

Hi all,
Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
For ex. in matmas05 extended for classification and inspection view and then created using 'CREATION'
related bapi.Do i also need to incorporate the changes by change related bapi or ir can be handled by change pointer concept.
Thanks.

Hi Sanu
1) Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.
=> Looks like you have extended standard IDOC here. so you need to find User Exit or BADI for the Push program to populate the additional fields. Yes, it is possible thru change pointers as well.
1) Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
=> Yes, as suggested in 1 try finding User Exits/BADIs.
Regards
Shital

Problem in Receiver side File Adapter using FTPS mode

Hello,
Here I am facing some problem in receiver side while using FTPS mode in the channel configuration.
The error message which i could see in the audit log is,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: java.lang.NullPointerException
Can anyone help me out in solving this issue ASAP?
I am using Per file transfer mode ni the reciever channel.
Thanks in advance,
Yours
Soorya

HI Surya,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

File access parameter in file adapter at receiver side

Hi Experts,
1- i am using file adapter at receiver side. i want to create my file with time stamp for that i have given the file construction mode = add time stamp and put file directly .but it is showing time in file name????????
2. i want my file name as TimeSheet_Country_Date_time.csv so for this what value i have to give in file Name Scheme parameter.
Regards

1- i am using file adapter at receiver side. i want to create my file with time stamp for that i have given the file construction mode = add time stamp and put file directly .but it is showing time in file name????????
The addtime stamp will add timestamp as the last part of the filename before the extension.
2. i want my file name as TimeSheet_Country_Date_time.csv so for this what value i have to give in file Name Scheme parameter.
You can achieve this using dynamic file naming UDF in mapping and using ASMA in file adapter.
Use current date function and generate the current date. Then use substring to pick date,time from it and format it according to your requirement (TimeSheet_Country_Date_time).Else you can write a UDF to generate the file name as per your requirement and then pass it to the dynamic filenaming UDF in the mapping.
Search SDN for dynamic file naming.

Problem with file contnet conversion in receiver side.

Hi All,
I have a source strucuture as below.
Header-1.1
Item..1..unbounded.
footer..1..1,
As i am using PI 7.0 , can you any one tell me ..how do i mention item segment is occuring multiple times in the reciever content conversion.If only one segment is comming then the scenario is working but if the item segment is comming with multiple times, it is throwing error.
Can any one let me know how do we achieve this.
Regards,
Chandu.

hi,
There is no need of giving * in receiver side FCC
give the structure as
header,item,footer
try with this one,it will work....
and give corresponding
header.feildSeparator
header.fieldNames
item.feildSeparator
item.fieldNames
footer.feildSeparator
footer.fieldNames
default endSeparator is 'nl'
if fixed length give fixed lengths

IDOC on receiver side

Similar Messages

Maybe you are looking for