Idoc ORDERS05 for PO Outbound for the Output type ZSUS.
I have a standard Idoc ORDERS05 for the PO.
I have Extended this Idoc and Created a Z- Segment below E1EDKA1 which is ZE1EDKA1.
There are Four Fields in it. i.e. ZZFNAME, ZZLMAE, ZZEMAIL & ZZADDRESS.
When I create the PO using ME21N OR Change using ME22N and use the MEssage type ZSUS which is Configured in the NACE T-Code.
The Idoc Just does not get triggered . I tried to do the same through the test tool. WE19 but yet the Idocs gets Created but the Z-segment does not get populted nor is seen.
I have writtem my code in the Exit 'EXIT_SAPLEINM_002' and have poulated the above mentioned four fields.
But the Idocs just does not reach the user Exit and hence these four fields do not get populated.
I have done the neccessary configuration in WE82 and also in WE57.
Can u please provide me with the Solution.
Regards,
Deepak.
Hi,
Use table NAST
Similar Messages
-
Problem with the Output Type and Transaction ME9F
Hi,
I have an Output Type (xyz) and Program (abc).
If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
Printout.
If for ME9F i give the output type ( pqr) then am able to get the Spool and
Printout.
Problem is :---
when am using O/P Type ( xyz ) for ME9F then am abel to process but am
not able to get the spool and not even printout.
I want to know where it can be wrong.
It's a high priority object.
Kindly help me out.
Thanks,
Zia.hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay -
No processing log generated from the output type for the IDOC
Dear experts,
the output type which is triggered with a transmission medium Special Function has not generated any IDOC.
The question is what is the role of a Special function and EDI transmission.
In some cases the system has generated an IDOC and some cases not. The output is pickedup automatically, but
does not always trigger an IDOC, Thats is the issue I am facing.
Therefore in cases where there was no IDOC created there is no processing log generated.
KIndly help.The status is green, and when I try to show the IDOC it doesnt show and no processing log.
The same output is processed for a delivery and it creates a IDOC but sometimes it doesnt. -
Is there a way to change the output type for Email Remittance Program?
Hello,
We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the
email which we receive looks like a regular email I mean with a normal text . Is there a way to get the output in different type like excel,attachment,pdf.
Any inputs would be highly appreciated.
Thanks,
SushmaCurrently there is a bug raised
Bug 8208646 : R12 UNABLE TO SEND SEPARATE REMITTANCE ADVICE AS EMAIL ATTACHMENT IN PDF.
If you want to customize this process you need to create data definition,new rtf template and bursting program to send pdf as attachment. -
How to add a comment for each row on the output of a report?
I would like to add a comment (field) for each row on the output of report? This comment should to be saved as well. Is there a way i can do that?
Regards,
RamHi Dimitri,
through the instead of trigger functionality i am able to update the view. This is view is based on different views which should be linked to a table (as you suggested) in which comments can be stored. Hower this table is empty and how to link this table with the view now? I face the following challenge.
View consists the following columns, for example
select name, sex, age from test_view
name sex age
John M 20
Anton M 30
Willy M 40
shirley F 38
sharon F 37
The report has the following output, for example
name sex age
John M 20
Anton M 30
Willy M 40
Shirley F 38
Sharon F 37
Now i would like to add comment through a button.
The report layout looks like
name sex age
John M 20 <add comment button>
After submitting the <add comment button> you can enter text which deals with John
text='John doesnot like me'
Finally the report display the comment as well
name sex age
John M 20 'John doesnot like me' <update/delete comment button>
Anton M 30 <add comment button>
Willy M 40 <add comment button>
Shirley F 38 <add comment button>
Sharon F 37 <add comment button>
After submitting the <update/delete button> you can change or delete the entered text.
I hope this example clears things up.
Regards,
Ram -
Print program for the smartform for selecting the output type (email/fax)
Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
RahulHi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji -
Find the SAP Script name for the Output type RD00 and Appli V3
Hi Gurus,
My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
Regards
paulHi,
The script Name is LB_BIL_INVOICE
You can find byNACE>V3>Output Types>RD00-->Processing Routines
In thje output type Press Change button and select New entries.
Regards
Sandipan
Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM -
Hiding the Output types for ME22n transaction
Hi,
We have a requirement in removing the output types from the message tab of ME22n trasaction.we have defined 2 output types for the same NEU and ZFES a special function,we need to check if the PO is already assigned with ZFES then the NEU output types should not be displayed over there in messgaes tab.
Any pointers will be really helpful.
Thanks,
JayUse EXIT function VN000001 for output selection
write down your code as per your need .
thanks
abhishek -
How to know the output type for particular tcode
Hi
how to know the output type for the VL10D & VAL TCODES.
Can anybody help me out.
Thanks and Regards
KrishnaraoHi Krishna,
GO to NACE and select your application and click on output types and in the next screen select your output type and and dbl click on Processing routines.
Here you will come to know about which driver program is used for which smartform or Script.
and for Program details you can refer table: REPOSRC
Regards,
Sachin -
User exist for controlling the OutPut type in sales order
Hi
Is their any exist which controls the output type based on header data of the order? VA01/02.
Best regards
Satish Kumar KHi,
IN the VOFM routine you can use the structure KOMKBV1 which will be populated with the sales org (VKORG), division (SPART) and order type (AUART).
Example
SY-SUBRC = 4.
IF KOMKBV1-VKORG = '0001' AND
KOMKBV1-SPART = '12' AND
KOMKBV1-AUART = 'ZXXX'.
SET THE return code to 0 to propose the output type.
SY-SUBRC = 0.
ENDIF.
Hope this helps..
Thanks,
Naren -
IDOC Number based on the output type
Hi,
I have a special requirement where in I need to find the IDOC number generated from the output type .
I have the NAST details and the Invoice number and need to find the IDOC generated for the particular NAST entry.
Is there any table or FM which gives this information in SAP.
Please let me know.
Regards
PraneethAll,
Solved myself.
Used FM WFMC_PROTOCOL_GET to get the IDOC number based on the NAST value.
Regards
Praneeth -
Standard smartform for application V5-Groups. and Output type LL00.
Hi,
I want the name of standard smartform for application V5-Groups. and Output type LL00.
I need to print Ship to party address of Multiple Deliveries.
Can anyone tell me the standard form name and Print program name.
Regards,
RajenderHi Lavanya,
SD_LOADING_LIST is a script.
Can you please provide me with a standard smartform as we need to develop this in smartform only.
Thanks,
Rajender. -
Restriction of Selecting Reason for movement based on the movement type
HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush -
Triggering Outbound proxy through Output type
I am sending sales order Acknowledgement to a file sytem from SAP. For this I am using a outbound proxy. I have a output type say ZCCS created in SAP . My question is how will the outbound proxy will get triggerred.
what should be the medium type(Print,Mail,External send ...etc) in the output type. & where do I write my outbound proxy code ( I mean should it be a executable program).
Message was edited by: SACHIN KAGLIWALLets say you want to send the data whenever you kick off your Print program. just call the proxy method in your ABAP program and it will be kicked off. Or write an ABAP program, use SUBMIT command.
regards
Shravan -
Update LIKP table while saving the output type in VT02N transaction
Hi All,
I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.This could be a result of one of the following reasons:
1: Incorrect smart form/routine assigned in the output configuration (NACE)
2: Serial number range of the delivery expired
3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
Hope this is helpful
Manish
Maybe you are looking for
-
Help needed in extracting pipe delimited fields in a CLOB data type
hi i Had a table with clob field as shown below. CREATE TABLE TRANSACTION_INFO TRASACTION_ID CLOB, LOG_ID NUMBER Insert into TRANSACTION_INFO (TRASACTION_ID, LOG_ID) Values ('354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25
-
Hi gurus, in transaction M706 "Processing Routines" configuration MIGO message (e.g. WE03) there is a field called "PDF/Smartform Form". We would like assign a smartform, not a sapscript, ¿Does exist an smartform standar in system? Thank you!
-
Moving music from Real Player to ITunes
All my music is in Real Player. I just got my first IPOD and now I need all those songs to be in the ITUNES program. Is there a way to move it without downloading each CD all over again?
-
Standby cisco ACE loadbalancer issues (network connectivity)
Hi ALL, We are having issues with the secondary (standby) load balancer ACE module on a 6500 switch. We see that the loadblanacer is not able to get onto the network which leads to problem with fault tolerance as well. Following is the ft
-
Strange behaviour of p35 platinum
ok this mobo is 2 days old in my pc .installed all bits and bobs then installed xp pro and all went like a dream not one problem its still running fine now,,however i turn all plugs off at night and when i rise the next day and turn all plugs back on