IDoc posted in R/3 but data for Date field has not generated.

Hi Experts
This is JDBC to IDoc scenarion.
Source: MS SQL Server
Date Data Type: smalldatetime
Date field Format: yyyy-MM-dd hh:mm:ss --> example: 2009-11-13 00:00:00
XI Mapping: Source Date --> Transformation --> Target Date
Transformation: yyyy-MM-dd hh:mm:ss to yyyyMMdd
Target: R/3 System
Date Data Type:  ERDAT from VBAK table - Date on Which Record Was Created
Date field Format: Date field (YYYYMMDD) stored as char(8)
Check points:
1. Mapping is working fine in XI and transformation is done with the test data: 2009-11-13 00:00:00  --> to ---> 20091113
2. In SXMB_MONI the data is processed from the source and the IDoc XML data is generated. In the IDoc XML data the date field is containing the value <DATE>20091113</DATE>
3. But when I tried to open the IDoc(SE05) in R/3 the date field is empty and no data is generated.
Request you to let me know why the error is happening.
Regards
Ram

Hi Ram,
First try to test the same IDOC generated in ECC Box by populating date field value using WE19 and test .
Or
Instead of passing date value from SQL Server, Just give a try with  Current Date function in Mapping and test in ECC system.
then we can think on further analysis.
Regards,
Vijay

Similar Messages

  • Default Data for Document Fields D_CUII_TYP

    Hi experts,
    I am trying to define default data for document fields in Export Switzerland.
    Source field is G_IMPCN,  target field is D_CUII_TYP.
    I create the following master data, i.e.
    G_IMPCN = 39095000
    D_CUII_TYP = FREI
    meaning if G_IMPCN is 39095000 then Legal Document Type FREI is being created automatically.
    Then I run the default data function on document level but nothing happens.
    The log shows G_IMPCN with value 39095000 but D_CUII_TYP = FREI is missing.
    Do you have any idea what else I should do to resolve this issue ?
    Many thanks for help which is much appreciated.
    Best regards,
    Corinne

    Hi Corine,
    Be careful with the logs, they are quite confusing as sometimes it displays the value it is looking for and sometimes the value it has foud. And sometimes the green and red lights are wrong or put in a logic that is confusing.
    Most likely it does not find the value because it is looking in the Import numbering in the import scheeme. Did you try with STAWN ? At any rate, if I may suggest, you need to setup the system with having the commodity code in the Declaration, because if you do not have the Scheme CHEXP defined in the Scheme for commodity code you are going to face trouble when trying to retransfer the Tarification to the feeder System.
    Keep me posted.
    Regards,
    Marc

  • Not getting data for 1 field in ODS

    Hi BW Experts,
    I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
    I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
    Thanks,
    Siva.

    Thanks for the Update
    1. What is your Service Pack Level?
      Service Pack is 0016
    2. Are you able to see the data in PSA?
       Yes I can see the data in PSA
    3. After load, are you able to see the value in New table?
       Yes i can able to see the data in New data table
    4. Anywhere, are you doing the SORTING of Data Package?
       No I have not sorted the data Package.I have not written any coding on this
    I have not written any coding in transformation also.
    Thanks,
    Siva.

  • Goods receipt for purchase assignments has not been posted. Mes. no. O1573

    Dear expert,
    I got a proplem with Intercompany STO as detail below:
    Goods receipt for purchase assignments has not been posted.
    Message no. O1573
    Diagnosis
    Certain fields needed for posting Goods Receipt have not been entered.
    System Response
    The goods receipt for Purchase Assignment was not posted.
    Procedure
    Check the error log and make the required entry.
    process Step by steps:
    1- create PO (intercompany PO) --> save
    2- create SO to sell to endcustomer (at receiving company)
    3- create DO
    4- assign the previewous PO to DO  (exchange function)
    5- PGI ---> problem as above
    Please, kindly help

    Dear all,
    In this case,  if I enter itemcategory "U" into PO I can post GR and GI at the same time I do PGI. but you know if I use "U" which mean I can't enter the net price as normal because this is a "stock transfer".
    Is there any ideal for this?
    Please, help me

  • How to populate the data for additional fields in custom report of fbl5n tr

    hallo friends,
    i ha ve to add some fields to the output of custome report of transaction FBL5N.
    Till now i have only added the fields to the output.
    Now i have to write the code to populate the data for those fields in the program.
    1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
    2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
    3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
    4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
    5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
    6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
    7.     Rating: (Table: KNKK; Field Name: DBRTG)
    8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
    9.     Credit control area: (Table: KNKK; Field Name: KKBER)
    10.     Company code: (Table: KNB1; Field Name: BUKRS)
    11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
    These are al fields i have to populate in the program..
    MY ATTEMPTS:
    I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
    And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
    Can anybody tell me how should i proceed..
    thanks in advance.

    Thnx Andreas,
    i have following doubts again..
    I have to add sales organisation field to the selection screen...(this is given in the req.)
    now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
    And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

  • What this mean? "could not rasterize because the pixel data for this layer is not"

    I've taken a color picture and made it black and white by doing the following: Layer>New Adjustment Layer>Hue/Saturation. I brought the saturation down to -100.  The pencil is selected and my foreground color is black.
    When I try to select the flowers in my picture to bring out their color (within the black and white image), I get a circle with a black line thru it and the error message "could not rasterize because the pixel data for this layer is not directly editable".  The steps I followed are working for most of my team but some of us are getting this error message.
    Any idea why and/or how to fix it?

    Ah, thank you!  I didn't have the mask selected. So once I did select it, the color came thru like magic. 

  • Goods receipt for purchase assignments has not been posted

    Hi all;
    In Vl02n in goods issue steps i have a message "Goods receipt for purchase assignments has not been posted"
    -the purchas order is assined to items delivery correctelly!
    -in our case, we haven't a stock.
    -after goods issue in vl02n we have tow goods mvt (101 for goods receipt) and (601 for goods issue) for the same quantity.
    so can you tell me how to solve this problem
    thx

    ok sir ;
    No i don't talke abouat STP i don't have any transit stock it's a simpl sales based on global purchas
    -first with me21n i created global purchas order
    -the sales will be picked from this purchas .
    -delivery is assigned automatically to this purchas order  with user exit.
    -with vl02n in goods issue steps there is tow operations ( stock mvt 101 in purchas assignement and a normal 601 for delivery )

  • How to find out the GR Numbers for which IR has not been done

    Hi Sap Gurus,
    Can anybody tell me how to find out the G R Numbers for which Invoice Receipt has not been done. Any TC or ant standard process to find out.
    Thanks N Regards,
    Siddhartha

    Hi Siddarth,
    Solution :
            1) Go to SE16 - Table Name : EKBE (PO History)
            2) Field - BUDAT (Posting Date)
            3) Transaction event Type:
                             - 1 (Only GR's )
                             - 2 (Both GR and IR)
            4) We can fetch both GR Numbers and also PO Numbers for which IR has not been done if transaction event - 1.
    In addition to MB5S, you can try this also...

  • XSLT Mapping: Namespace for prefix 'ns0' has not been declared

    Hello, I am working on a synchronous SOAP call and having some trouble with the response message. The web service has its own namespace and I am trying to convert this to my custom data type in PI. PI wants the message to be in format of having ns0 prefix and namespace like we have defined (http://foo for example).
    I have an XSLT mapping (see below) which works fine with my test response payload (pulled from SXMB_MONI source) on this online XSLT test site:
    http://www.freeformatter.com/xsl-transformer.html
    However when I import this archive to PI and test with operation mapping it always says "Namespace for prefix 'ns0' has not been declared."
    This is very confusing because when I test it online, I see both prefix and namespace declaration perfectly. Is there a way to see the results in the PI test tool? After this XSLT java error it doesn't give me the output even in Trace Level All mode.
    Please advise on this issue or if you know an easier way (such as altering my datatype/message type to match the inbound SOAP message). I tried working with the 3rd party WSDL but the response message types show a different root level node than what PI is receiving so I gave up to make my own matching datatype. I just have to solve this last inbound namespace issue and should be finished.
    FYI I have refreshed all PI caches and activated all objects.
    Thanks for your ideas!
    <xsl:stylesheet version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:ns0="http://foo"
      <xsl:output method="xml" indent="yes" omit-xml-declaration="yes"/>
      <xsl:template match="@* | node()">
        <xsl:copy>
          <xsl:apply-templates select="@* | node()"/>
        </xsl:copy>
      </xsl:template>
      <xsl:template match="/*">
        <xsl:element name="ns0:{local-name()}">
          <xsl:apply-templates select="@* | node()" />
        </xsl:element>
      </xsl:template>
      <xsl:template match="/">
        <xsl:element name="{local-name()}">
          <xsl:apply-templates select="@* | node()" />
        </xsl:element>
      </xsl:template>
    </xsl:stylesheet>

    Some additional info, here is an example payload which goes through the XSLT mapping perfectly, but in PI I get the error about missing ns0 declaration.
    XML input:
    <bar xmlns='http://irrelevantnamespace'
    xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'
    xmlns:xsd='http://www.w3.org/2001/XMLSchema'
    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
    <foo/>
    </bar>
    XSLT mapped output using test tool and XSL above:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:bar xmlns:ns0="http://foo">
       <foo />
    </ns0:bar>

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • In IDoc to file example if IDoc has not generated?what might be the problem

    In IDoc to file example if IDoc has not generated? what might be the problem? where we can find it?

    Hi Sudhakar,
      We need to check in sm58 of R/3 system for any errors..and according to the error message we have to fix the problem.
      It can fail with many reasons for example error in RFC destination connection etc.
    Regards,
    Prasanthi.

  • SCCM Client Policy instance "The body for this policy has not been downloaded."?

    Hi,
    With PolicySpy I got SCCM Client Policy instance with an red and white symbol "The body for this policy has not been downloaded." what does that mean?
    /SaiTech

    Hi,
    Is there something not working? What is the core issue?
    -It is a long story, I will take the short version. I have had several supportcase at Microsoft, I think in two yeas time. We have done RAP as a Service, and no big issue. I have reinstalled the MP just some Days ago.
    I started with slow App-V 4 user centric deployment (hours). No I have an case at Microsoft support about Enable Win32_QuickFixEngineering class in the Client Setting hardware Inventory dont get enable at client side.
    If I do policy reset I think it take long time 15-30 minuters to all actions show up again.
    So I try to understand MP and policy, I have an feeling that something is not right but what?
    /SaiTech

  • Account for bank transfer has not been defined

    Hi,
    I am doing a Bank Transfer in my SDK development and I get following error:
    "Account for bank transfer has not been defined "
    I use _SYS00000000002 (Cash at Bank - Checking (HO, USA, GA )) from the US demo database for testing and it doesn't work.
    My code is below, even when this only for consuling.
    Thank you,
    Rune
    oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
                        oPayments.CardCode = vmp_CardCode_string;
                        oPayments.DocDate = DateTime.Now;
                        oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
                        oPayments.TaxDate = DateTime.Now;
                        SAPbobsCOM.Recordset oRecordset_BankAccount = null;
                        oRecordset_BankAccount = ((SAPbobsCOM.Recordset)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)));
                        oRecordset_BankAccount.DoQuery("SELECT * FROM [dbo].[@PAY_TYPE] WHERE [U_PayMethod] = '01'");
                        oRecordset_BankAccount.MoveFirst();
                        if (oRecordset_BankAccount.EoF == true) // No Records
                        else
                            vmp_BankAccount_string = Convert.ToString(oRecordset_BankAccount.Fields.Item("U_BankAccount").Value);
                        oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343"; //"1010140-001";
                        oPayments.TransferDate = DateTime.Now;
                        oPayments.TransferReference = vmp_CardCode_string;
                        oPayments.TransferSum = vmp_Amount_double;
                        vc_Message_Result_Int32 = oPayments.Add();
    Edited by: Rune Brattas on Jun 18, 2009 5:18 PM

    Hi,
    I request you to post this thread in SDK forum,so that you may get quick response.
    And kindly close this thread after posting in the appropriate forum.

  • XL reporter error-requried COM add-in program for XL reporter has not ben l

    Dear All,
    I am getting this error could anyone please let me know the solution:
    "A requried COM add-in program for XL reporter has not been Loded and prohibuit Microsoft Excel from running.

    Hi,
    try to use the solution from the SAP note 893307:
    XLR - Activation of Other Microsoft Excel Add-Ins
    Symptom
    When Microsoft Excel is launched from within the XL Reporter application, other add-ins selected in Microsoft Excel's Add-Ins window are not automatically loaded into Microsoft Excel upon start.
    Other terms
    XLR, Business One, Addins, deactivated
    Reason and Prerequisites
    When Microsoft Excel is started through Automation (COM), Add-ins are not loaded by default. This is by design and XL Reporter follows this behaviour.
    The following is a workaround solution that is avalible in SAP Add-On XL Reporter 2004 SP02 patch 2 and SAP Add-On XL Reporter 2005 SP00 patch 1 and subsequent releases.
    Solution
    If you need to have other add-ins automatically loaded upon start, a workaround solution is now possible:
    In the Microsoft Registry Editor on your client machine, change the following settings in your system registry: in the registry tree underHKEY_CURRENT_USER/Software/iLytix/XLReporter/Settings/SBOOEM, add a key with the following name: StartExcelAddins. The key can have two values: the value, 1, which activates other add-ins upon start, and the default value, 0, which leaves the other add-ins inactivated.
    Incorrectly editing the registry may damage your system. System registry changes should therefore only be performed by an advanced user who is prepared to both edit and restore the registry. For details about the system registry, please refer to Microsoft Registry Editors help system
    if not solve yet, just let me know
    JimM

  • HT1349 How do I change my Icloud ID on my mobile, I have changed it on my computer and in other settings on the phone, but the actual icloud ID has not changed and my music is not syncing to my phone

    Hi, I need some help, How do I change my Icloud ID on my mobile, I have changed it on my computer and in other settings on the phone, but the actual icloud ID has not changed on my phone and my music is not syncing to my phone

    Note: Content bought using one Apple ID cannot be merged or transferred to another Apple ID.

Maybe you are looking for