Idoc problem customer data

Hai gurus,
the scenario is that ours is a sender system and other is receiving system.
customer master data is sent form our system and other receives it.
what happened here is idoc is sent to the other system and data went to other system is incorrect
example :
sender system
(customer master)
First Name DAVID
Last Name DECOSA
receiving system
First Name constant
Last Name DECOSA
so when the idoc is sent the 'first name ' of the customer is getting "constant".
what could be the possible reasons for it?
It is urgent and could help in this case.
Thanks in Advance
sameer

Hi,
Check the UserExits at the I/b side, it may be hardcoded somewhere else for First Name as constant.
You can use WE19 for creating I/b Idoc for debugging purpose.
Hope it helps to sort out the Issue.
Regards,
Anbalagan

Similar Messages

IDOC: Problem with data filter for IDOC extension field

Hallo!
I've created an idoc extension for the basic type DEBMAS06 that works fine. Now I want to use a data filter for one field ( company code ) of my segment. Every segment with a company code different from 100 should be filtered and not send to the other client. But what happend is that for all customers that have at least one company code different from 100, all segments including the one with cc 100 were deleted and a error "Segment ... does not exist for message type DEBMAS" appeared on the screen.
Does anyone have any ideas about this problem?

Not sure about changes to be made at the filtering options.
An alternative would be sending the data to XI as it is and perform the mapping to remove the unnecessary segments.
Disadvantage: Unnecessary processing of segment would be done at XI.
Advantage: The integration logic would be completely handled by XI.
Regards,
Prateek

Problems with Custom Data Types when converting from TS 1.0 to 3.0.

I am currently involved in the process of converting a test environment from TestStand 1.0, LabVIEW 5.1, and Windows NT to TestStand 3.0, LabVIEW 7.0, and Windows XP. We use a custom Operator Interface developed in LV. Based on the entered Model and Serial number, the appropriate Test Sequence is called. We also use a custom Process Model. The steps in the Test Sequence are either LV code modules or DLLs created in C++. We have LV SubVIs and C++ API functions that allow the developers of the test steps to add data to various Custom Data Types. For example, a developer may set up a test to add a note (Step.Result.Notes[x].String) when the test fails. Step.Result.Notes is a container for an array of strings. The attempt to set a note first attempts to use SetDimensions to redimension the array, then SetValString to set the value. These notes are added to the report. On the old system, everything worked fine. A note could be added to any result. On the new system, if a note is added to say the 5th result, but results 1-4 do not have a note, the test sequence ends and the Operator Interface returns to waiting for data entry (as if no test ever happened). No report is generated. The LabVIEW libraries have been modified to solve this problem by calling SetDimensions to incrementally increase the array size by one, and populating the unused TestStand array elements with an empty array of LabVIEW strings using the SetValString call . In other words, based on the previous example, if the user wants to set a note for the 5th result, the notes for results 1-4 must first be sent an empty array of strings. The report will only display the note for Result 5 (as desired). In addition to this being cumbersome, attempting to implement the same workaround in the C++ API has been unsuccessful because even though the note arrays for unwanted notes (1-4) is initialized with nothing, it is still displayed as a note (empty) on the report. If anybody knows what is wrong and what the solution is, it will be appreciated.

Aaron,
Thanks for your reply. I will attempt to clarify. I am working with a single step. The step calls a DLL. The DLL performs many 'checks' on the UUT (e.g. Model Number Check, Serial Number Check, Calibration Constants Check, etc.). Under the Type Palette - MyTypes.ini, we have a Step Type called TEST_DLL with a container in it called Results. In the Results container are a number of things, but I will only list the important ones:
Notes (Array of Type 'Notes'; Type 'Notes' is a Custom Data Type (container, Type Definition)containing an array of strings called 'String')
-Notes are generally set when on of the checks fails, otherwise no Note is set for the check.
Val (Array of Type 'Val'; Type 'Val' is Custom Data Type (container, Type Definition) containing a Boolean called 'Boolean')
-Val indicates whether the check passed of failed
Pseudocode example:
//Model Number Check
check# = 0;
resultBOOL = ModelNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number Check failed");
Note# = 1;
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Model Number = 1234");
//Serial Number Check
check# = 1;
resultBOOL = SerialNumberCheck();
SetDimensions("Step.Result.Val", 0, "[0]", check#);
SetValBoolean("Step.Result.Val[check#].Boolean", 0, resultBOOL);
if(resultBOOL == FAIL)
Note# = 0;
SetDimensions("Step.Result.Notes", 0, "[0]", check#);
SetDimensions(Step.Result.Notes[check#].String, 0, "[0]", Note#);
SetValString("Step.Result.Notes[check#].String[Note#]", 0, "Serial Number does not match expected");
More Checks
As you can see above, the "Step.Result.Val" array is redimensioned for every check. The "Step.Result.Notes" array is only redimensioned when a note needs to be added for a failing check. If the entire step executes and no check adds a note, the sequence is fine. If every check fails and therefore every check adds a note, the sequence is fine. However, if there are any gaps (e.g. check 0 adds a note, check 1 does not add a note, and check 2 tries to add a note), the sequence will stop. If I add blank notes for every check that would otherwise not have a note, the sequence completes, but the report shows the blank note.
Also, the exact code that is causing these problems runs fine on our old systems (TestStand 1.0). I hope that I clarified the problem and thanks again for the help.

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

Custom Data Type Problem

Hi,
Im just starting in corba so his might be something simple, anyway..
Im adapting the HelloWorld example. And in my idl interface I want to use a custom custom data type named SongPreview. I have a class file for this in the same directory as my java code.
module HelloApp
interface Hello
string sayHello();
SongPreview getFile(in String name);
The problem is that I get an error saying that SongPreview is an undeclared type.
Any idea what im doing wrong?
Thanks

Just like any other language you have to define the return
type. In this case, it is SongPreview.
You must define SongPreview in IDL.
You could do it in the same IDL file or in another IDL.
But you MUST define in IDL.
====================================
Hi,
Im just starting in corba so his might be something
simple, anyway..
Im adapting the HelloWorld example. And in my idl
interface I want to use a custom custom data type
named SongPreview. I have a class file for this in the
same directory as my java code.
module HelloApp
interface Hello
string sayHello();
SongPreview getFile(in String name);
The problem is that I get an error saying that
SongPreview is an undeclared type.
Any idea what im doing wrong?
Thanks

Inconsistent Errors when processing IDocs using custom Function Module

I am encountering a most perplexing error. Here is the situation.
We have a custom function module to update data in the EH&S system. We are having a bizarre error occurring. This is the basic processing of the function module:
1. IDoc data is read and loaded into an internal table.
2. Data is run through a series of checks to determine if the data is valid for entry into the system.
3. After validation we use function module C1F2_SUBSTANCES_READ_WITH_REF to read characteristic data for the substance. This data is used to validate whether current data exists to allow for loading of the IDoc data. (This is the step where the IDoc is receiving an error even if the data is valid. This only occurs if we are processing a large amount of Idocs and one IDoc contains valid data and another invalid data for the same substance. It occurs even if the Idocs are not processed in sequence. If individually processed or reprocessed after initial failure they pass. This is what is so confusing!) If it exists, a flag is set and the data is loaded using function module BAPI_BUS1077_CHANGE to modify the data.
4. If the flag is set to allow further processing, the function module C1F2_SUBSTANCES_READ_WITH_REF is used again to select different characteristic data for the substance. A similar validation process occurs and if it passes, data is loaded using BAPI_BUS1077_CHANGE to update and BAPI_BUS1077_CREATE to create new data.
Here is the situation:
When processing one valid record for one substance, the record loads successfully. When processing multiple valid records (all are valid) for one substance, they all load successfully. The problem occurs when attempting to load valid and invalid records for the same substance. Some times the program successfully loads the valid data (as expected). Other times, it will not load any records. It is not consistent!
The order of IDoc processing does not have an impact on the success of the load. Whether the valid or invalid record processes first does not have an impact on the success of the valid substance load.
Does anyone have ANY Idea of what is going on? I am clearing all fields in the function module before processing occurs. I cannot find what is causing the error to occur.
HELP!
Jim Hardy

I have some further information. It seems that if data for a substance is sent in two separate Idocs, one with valid and one with invalid data, As long as the two IDocs are processed consecutively, they process correctly. If they are separated by IDocs containing other substance information, they fail.
thanks
Jim

Generate outbound idoc for Customer Master

Hi Developers,
I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
Thanks in advance for helping.
Regards,
Gajendra

Hi,
If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
If you want to send the idocs automatically, then you will to configure some program.
Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
Transaction SPRO
SAP Customizing Implementation Guide -->
SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
Take a look at this thread.
Re: automatic Idoc outbound
Regards,
Ravi
Note : Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

ADRMAS IDoc for customer address

Hi,
I am trying to send the customer address information via ALE. We are using a custom message type (ZDEBMAS) to send the customer data. I am aware that additional address information can be sent using ADRMAS. However, this message type is linked to a BAPI and I am unable to trigger the IDoc. I have activated the change pointers for ADR2MAS, ADR3MAS & ADRMAS as suggested in previous posts. I have also added the BAPI in the Model view with Object type - BUS4001 and Method - SAVEREPLICA. Partner profiles have been generated as well.
Can anyone guide me as to what I am missing? Any help is greatly appreciated.
Thanks!
Sheetal

Hey,
I think there are two possible problems:
1. Please log in to XI system,
check in transaction IDX1,
which RFC destination is used for the system SAPR3D.
than test this RFC destination in transaction SM59.
2. Please check (via transaction WE30) that the IDOC in the ECC 6.0
have the same fields as the IDOC in 4.6C.
If they have different fields, than you must change the field "version" of channel of the 4.6c system (in the Integration builder configuration).

MATMAS outboud Idoc: problem in SM58

Hi experts,
i have done Idoc to File scenario through SAP PI 7.0 server,
here SAP ECC 6.0 is the sender (MATMAS05- idoc) and Fileserver is the Receiver system and the SAP PI 7.0 is the Middleware system.
created Prtner profiles, customer distribution model view and distributed.
i triggered the IDOC from SAP ECC 6.0 system, (BD10), in WE05it is showing as IDoc processing success, data has sent to port and the status code is 03.
then i checked in tcode SM58, there it is showing under the
user - username
Function Module - IDOC_INBOUND_ASYNCHRONOUS
Target System - PI7CLNT001
Status Text - : : 000
can anybody tell me what would be the problem?
Thanks,
Kumar

Hi,
what kind of connection do you use between ECC and PI - RFC / Proxy? You can check this via SM59.
Is the file reaching PI or does the IDoc stuck in SM58? If it stucks in SM58 - try to reprocess it (hit F6 button).
Also what settings do you use in WE20 for partner PI7CLNT001?
Thanks,
Kai

No Data in Reports Details in Custom date range

Hello, iTunes U Public Site Manager Admins.
As the iTunes U Public Site Manager admin, I've been trying to access our institution's iTunes U Reports Details for a couple of days. (I send a monthly report of usage to our course/collection contributors.) When I custom the date range, under Details, there is zero entry; "No data available in table" message is shown.
This feature had been working well since Apple iTunes U added this enhancement on August 13, 2013. The report Details showed the exact stats for Browse, Subscribe, Download, Stream, and Enclosure for each course/collection in the custom date range.
Now under "Details", the data is shown only when the date range is Last 30 Days. It shows no data in custom date range when the Calendar is used to select a Start Date and End Date.
Has anyone else noticed this problem?
Thanks.
Q. Wang

Erik.
I used your suggestion and it worked very well. This is how I did it.
Export the range of data that includes Feb. 1-Feb. 28, 2014 as .tsv file.
Open that file in Excel.
Add a blank column next to the Date column. Use function =Month() to just extract the month into the new column. Fill down the whole column. Then copy and paste special (value) into the same column (I have over 26,000 rows of data in the file.) Converting to Value will allow for the next step of PivotTable.
Create a PivotTable for the 26,000 rows of data. Use Month as the Report filter, iTunes_ID as the Row Labels, Select Browse, Subscribe, etc. as the Sum Values. (The result is a summary table with about 200 rows.)
I then do a Vlookup to my premade Master file to add Category (course, collection, resources) and Instructor Name to each of the 200 rows.
That will do it for my monthly report.
Thanks for your tip again. I did not know the .tsv file would have DATE for each item.
Sincerely,
Q. Wang

Customer Dates in Activity

We have added some custom dates to our date profile for activities. We woulod like to transfer these dates to BW.
Is there an easy way to do this, or do I need to enhance the datasource etc.?
Does anybody have a list of the steps I will need to go through?
I think:
1. Enhance datasource, with new extract structure, selection and mapping modules.
2. Replicate new datasource to BW.
3. Create new ODS object containing new fields and update transfer rules accordingly.

Stuart,
We're facing the same problem. How did you extracted custom dates into BW? (if you did!). I've added a couple of custom dates using the date management functionality in CRM, but I´m not able to transfer those values to BW.
If you have any info or clue, please let me know. Thanks!
Pablo

IDOC: FB70: Customer Invoice

Hi,
I want to post document using tcode FB70.
Please provide me the IDOC for the same.
These are the fields which i want to pass to the IDOC:
Account (Customer)
Amount
Transaction
Document Date in Document
Baseline Date for Due Date Calculation
Posting Date in the Document
Company Code
Item Text
Reference Document Number
Profit Center
Order Number
G/L Account Number
Account Number
Debit/Credit Indicator
Amount in Document Currency
Dunning block
WBS Element
Invoice status such as Dispute
Exempted from interest calculation
Dunning level
Thanks.
Vinod.

Thanks Neha,
But in this IDOC, I am not able to see the amount field which we put in header in FB70 tcode.
Please tell me how to go about it.
Thanks.
Vinod.

Custom Data Processing Extension and Parameters

Hello,
I have successfully implemented a custom data processing extension. Now I'm trying to add parameters, but the documentation is very weak on this topic. Also all examples of custam data processing extensions I have found so far are working without parameter support. Using a search engine I have found a custom data processing extension's sequence diagram during report execution. The related article also gives some hints about the IDbCommandAnalysis interface.
The GetParameters implementation creates a parameter collection based on the current command text and returns this collection. So far no problem.
My question is how to implement the IDbCommand's CreateParameter method and Parameters property? In CreateParameter I just return a new instance of my IDataParameter implementation, and the Parameters property returns a new parameter collection based on the current command text.
Is this ok so? At least this is the first implementation which seems to work in the data designer. If I share an instance variable for GetParameters and Parameters I will either get all parameters twice or BIDS will crash when pressing the execute button in the dataset designer - depending on my actual implementation.
What I'm still missing is how to get the parameters added automaticall to the dataset's properties parameter register?
thanx in advance and kind regards, Gerald

I think that finally (after some days of trying) I could make it work. The dataset and report parameters are reflecting the command text's parameters now (BTW: to answer my last question - the dataset's properties are updated after pressing the refresh button only). The road to success was not to use the same member variable for the collections returned by IDbCommandAnalysis:GetParameters() and IDbCommand:Parameter and not to fill the latter one with the command text's parameters (see partial source code below).
public sealed class MyCommand : IDbCommand, IDbCommandAnalysis
    private string m_commandText;
    private MyParameterCollection m_parameters = new MyParameterCollection();
    public string CommandText
        get { return this.m_commandText; }
        set { SetCommandText(value); }
    public IDataParameterCollection Parameters
        get { return m_parameters; }
    public IDataParameter CreateParameter()
        return new MyParameter();
    public IDataParameterCollection GetParameters()
        return GetParameterCollection();
    private void SetCommandText(string commandText)
        m_commandText = commandText;
    private MyParameterCollection GetParameterCollection()
        // ... create parameter collection based on m_commandText
Still there are some open questions:
How can I update the report parameter's properties? Now the parameter's data type is always string, but I'd like to assign the right data type. I'd also like to tag the parameters as hidden and supply a non-queried default value. Is this possible? How?
Although I my implementation of IDbCommandAnalysis:GetParameters() returns a collection containing the parameter names and values the "prompt query parameters" dialog (after pressing the query designer's execute button in the toolbar) shows a "<blank>" value for the parameters. What could be the problem?
Thanx in advance and regards,
Gerald

How to Test SSRS Custom Data Extension in TSql

Hi There,
I have created a custom data extenstion for SSRS 2008 Reporting Service.
I can test the CDE in the Report DataSet -> DataSet Properties -> Query Designer -> Run Query.
In the Command Text I pass parameters to the invoked VB code which is of type "BaanstedeCds" then name of my custom data extension.
I can even Attach the Visual Studio VB Code Project that is invoked by the Query Designer an debug the code.
The custom data extension works perfectly in SSRS.
However I have not found a way yet to run BaanstedeCds (with a parametertext) from within SSMS 2008 by using an T-SQL statement!!! Is there a way to use the SSRS Custom Data Extension in Sql Server Management Studio using the dataset type I used in
SSRS 2008?
Because I am leaving the path of using Custom Assemblies in SSMS, for deploying an testing that way is undoable for me.
I is to complicated and in order to properly debug these routines the entire solution of multiple projects is deployed each time even the slightest change has been made to the VB code. Also if I want to deploy from Test to Production it is very hard. I have
to detach the databases etc, ect. Note my previous question about this subject that remained unanswered!!!
Using the Custom Data Extension the problems are a lot less. However I how do I use a routine in the CDS in T-SQL, like I could invoke a routine in the Custom Code Assemblies?
I "hate" CLR routines. I have extreme trouble managing these CLR's as I explained in my post and other posts in the past.
You just cannot build a maagable system that way.
I had to convert all the CLR's (I had a lot of them) to Custom Data Extension Functions, as they do not have all the drawbacks of CLR's.
And using the CDE with all the converted CLR's in it works much better for me in the Report Manager.
However in order to test de CDE I must invoke the CDE in a Windows Form something like this:
Private Sub cmdGetData_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdGetData.Click
Dim CommandText As String = ""
' Get Parameters for CDE GetData
CommandText = txtAdoCds.Text
Dim Rdr As New BstCds.BaanstedeCdsReader(CommandText)
' Invoke GetData Function of CDE Rdr
' Input: CommandText: txtAdoCds.Text = TextBox on TestForm
' Output: DataTable: RdrDataTable
Call Rdr.GetData(CommandText)
If Not Rdr.RdrRetVal Then
GoTo End_Method
End If
' Show DataTable: RdrDataTable (in Excel)
If Not BstOff.ToonTabel(DataTabel:=Rdr.RdrDataTable) Then
Exit Sub
End If
End_Method:
End Sub
'=========================================================================
' File: BaanstedeCdsReader.vb
' Summary: Provides a means of reading one or more forward-only streams
' of result sets obtained by executing a command at a data source,
' and is implemented by Baanstede Data Processing Extensions
' that access BaanstedeIw3-routines.
'=========================================================================
Public Class BaanstedeCdsReader
Implements IDataReader
#Region "Public Variables"
Public RdrRetVal As Boolean = False
Public RdrSqlSel As String = ""
Public RdrDataTable As DataTable = New DataTable
#End Region
#Region "Constructors"
#End Region
#Region "IDataReader Members"
#End Region
' GetData '
#Region "GetData Method"
'==================================================================================================
'We are executing the command using the connection string that connects to the Active Directory.
'Hard coding of the connection string is because it is the same for all the ADs.
'Once we read the data using a DataReader, we place the same in a DataTable so that can be used for
'Other processings.
' Public Sub GetData(ByVal _CommandText As String)
' Output in Public RdrDataTable As DataTable
'==================================================================================================
Public Sub GetData(ByVal _CommandText As String)
' Ophalen Data in DataTabel '
RdrRetVal = False
' Fills RdrDataTable Using _COmmandText
RdrRetVal = True
End Sub
But can I invoke Report Manager Source Type BaanstdeCds's .BaanstedeCdsReader.GetData(CommandText) in TSQL any other way then using CLR ?
Regards Jos
It works, but it does not work (The program runs, but does not produce the desired result)

Hi Josje,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Best Practice to Export Solman Customer Data to a new one

Hi Solman experts,
We are facing a new project to move a huge Solution Manager VAR Scenario to a new one server, the biggest problems is system landscape from customer data (LMDB) and incident management customer data (ITSM), also mopz, ewa and sap service delivery that has request from customers to SAP and is Stored in solution Manager.
The information that we have to export to a new Solution Manager is:
Customers: +300 aprox.
Systems: +900 aprox.
- Solution Manager Configuration "Managed system Setup" for around +900 productive systems.
- Customer data in LMDB and SMSY ( product systems, tech.systems, logical components, solutions, etc... ).
- VAR Scenario data from: ITSM (with communication with SAP).
- VAR Scenario data from: Mopz, ewa, Sap engagement and service delivery, Solution Documentation.
We decided to do that to user a flesh installation of Solution Manager SP11 with better system resources, better than migrate our existing one.
What do you think that is the best way to migrate customer data from a SAP Solution Manager SP08 to a new server with SAP Solution Manager SP11 ?
Thanks,
Lluis

Hi forum,
Have you check anytime that SAP package ? AGS_SISE_MASS
you can check it runing that webdynpro app:
http://<server>/sap/bc/webdynpro/sap/wd_sise_mass_conf
Related SAP Support Notes:
http://service.sap.com/sap/support/notes/2009401
http://service.sap.com/sap/support/notes/1728717
http://service.sap.com/sap/support/notes/1636012
Regards,
Lluis

Idoc problem customer data

Similar Messages

Maybe you are looking for