IDOC status 54

Hello!
IDOC status 54 - Error during formal application check...
Has this status any specific meaning and usage?
In which cases it is recommended by SAP to set it?
Should it always be followed by a record with status 51?
Thanks and best regards,
Vlad

No answer at all...

Similar Messages

IDOC status at 30, but in we05 it is 03

Hello Gurus!!
My program generates an IDOC and as soon as the idoc is generated it the status is 03 then i have todo something else.
Within the program when i am cheking the status is 30 but actually in transaction we05 the status is 03.
I have cheked the partner profiles and transfer_idocs_immeadiately has already been selected.
I have already gone thru the forum but no valid solution was given,
There is no need to change any ALE configurations / port configurations because everything just work fine. It is only that within the program i am not able to catch the status 03. the proram is not waiting untill the idoc status is 03. it is capturing only the status 30.
Is there any thing that i can do within the program? should i capture the idoc number and then check the idoc status from EDID4?
Please answer o this questions ASAP.
Regards.

Initially when you create the outbound idocs then status is 30. then you have to run the program RSEOUT00 to process the idoc then after the processing the status changes to 03.
But the Program RSEOUT00 is optional. In the partner profile (WE20) If you select the option 'Collect Idocs', then you have to schedule the program RSEOUT00 to process the Idocs otherwise if you have choose the option 'Transfer idoc immediately', you don't need to do anything.
Thanks,
Srinivas

Is it possible to create a custom IDOC status?

Is it possible to create a custom idoc status on table TEDS1?
I have looked through customising and cannot seem to find a way to create a new idoc status.
Has anybody done this?

Hello Chester..
hope this link will be helpful,
Re: IDOC status
*********Please reward points ,if found useful

IDoc status 53 in employee replication from SAP HR

Hi experts,
We are having some problems in CRM BP creation with role employee.
We are using CRM 5.0 and SAP ECC 6.0 and we are trying to replicate employees information to CRM from HR.
After read the notes 934372, 615896, 550055, 363187, 312090 we made the next configuration steps in our systems:
R/3:
- Creation of connection port (trans. WE21)
- Creation of logical system (trans. WE20) and assignment of outbound message HRMD_ABA
- Creation of distribution model (trans. BD64) with all filters indicated in note 312090
CRM
- Creation of logical system (trans. WE20) and assignment of inbound message HRMD_ABA
- Creation of conversion between basic types HRMD_A05 and HRMD_ABA01 (trans. WE70) as described in note 312090
- Creation of conversion between message types HRMD_A and HRMD_ABA (trans. WE73) as described in note 312090
- Creation of external number range ZE from HR01200001 to HR01299999 (using PA04 in R3 we found the number range between 01200001 and 01299999)
- Creation of BP Grouping with the same name of number range (ZE) checked to be external too
- Update of table T77S0 (using SM30):
HRALX HRAC X
HRALX PBPON OFF
HRALX PBPHR ON
HRALX PBPON ON
HRALX PNUMB 3
HRALX PPROL BUP003
HRALX PSUBG ZE
PLOGI PLOGI MV
We know we should have the same value in R3 and CRM for PLOGI/PLOGI, so we created in CRM MV because that is the plan version used in R3. To create it, we just manually add a new row in table T778P and then selected it in table T77S0. Is this the correct way to create a plan version?
After these steps, in R3 we execute program RHALEINI with parameters:
- Plan version = MV
- Object type = P
- Object ID = an active employee
- Reporting period = all
- Transfer mode = Insert
- Receiving system:
Receiving partner No = DCRCLNT300 (logical system created in WE20)
Message type = HRMD_ABA
And everything looks fine in R3.
In CRM, using trans. WE05, we can see that the iDoc is created, apparently without problems with status 53 - "Applicaton document posted" but the business partner is never created.
Did we miss some configuration steps?
Should we do something more after see the iDoc in CRM to create BP?
Thanks in advance.
Alda

hi pratk bhai,
ya i have done the same setting what Ada has mentioned eariler,
and as of your suggestion to maintatin the mandatory infotype, i have even done tht,
after running RHALEINI in R3, the status is all green here.
when i run the tcode BD87 to check the Idoc status its showing fine (Error free).
now, through tcode se38 the report CRMHRALE_CENTRAL_PERSON shows all the employees as status green,,
but the partner number is not getting generated. ( i have used HRALX-PNUMB= 3 (Prefeexing the number range coming from R3)).
kindly advice me what should be done in order to generate a BP number for the replicated HR Employee.
best regards,
Madhup

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

IDOC STATUS 29 to 68

Hi all,
Customer request is change idoc status from 29 to 68.
68 = no further processing inbound side
31 = no further processing outbound side
if i change status of idoc from 29 to 68 using Fn module IDOC_STATUS_WRITE_TO_DATABASE
Data of idoc is vanishing.
I observed that if i change status of idoc from 29 to 31 then there is no data loss in idoc with same Fn module.
Is there any way to change idoc status from 29 to 68 without losing the Idoc data.
anyway for both 68 & 31 meanings are same , but customer requires 29 to 68.
if u have any idea please suggest me.

Hi Suneel,
If the program does't exits then try this ...
DATA: L_EDIDC_TAB       LIKE EDIDC      OCCURS 1 WITH HEADER LINE,
      L_IDOC_STATUS_TAB LIKE BDIDOCSTAT OCCURS 1 WITH HEADERLINE,
      L_IDOC_CONTROL    LIKE EDIDC.
    L_IDOC_STATUS_TAB-DOCNUM = <your IDoc number>.
    L_IDOC_STATUS_TAB-STATUS = '68'.
    APPEND L_IDOC_STATUS_TAB.
    CALL FUNCTION 'IDOC_STATUS_WRITE_TO_DATABASE'
         EXPORTING
              IDOC_NUMBER               = L_EDIDC_TAB-DOCNUM
         IMPORTING
              IDOC_CONTROL              = L_IDOC_CONTROL
         TABLES
              IDOC_STATUS               = L_IDOC_STATUS_TAB
         EXCEPTIONS
              IDOC_FOREIGN_LOCK         = 1
              IDOC_NOT_FOUND            = 2
              IDOC_STATUS_RECORDS_EMPTY = 3
              IDOC_STATUS_INVALID       = 4
              DB_ERROR                  = 5
              OTHERS                    = 6.
Regards,
Ferry Lianto

Idoc Status 53 but Applicaton document not posted message type PORDCR

Hi,
Need your help. I am using message type PORDCR and Basic type PORDCR04 to create Purchase order through inbound Idocs. I am getting correct status '53' Application document posted along with the new Purchase order number. When I am trying to see it in EKKO / or ME23N I could not see this purchase order.
Can anyone please let me know what could be the possible reason for document is not getting posted in in database but Idoc status is correct.?
Thanks in advance.
Regards,
Deepak

check SM13 and ST22 to see if there are any errors there

IDoc status is not coming to '03'

Hi,
When I run my program, it is giving IDoc status as 30. When I go and see in WE05, it is showing same status. It's not getting 03 status.
I know that we can bring the status to 03 by executing the program RSEOUT00. But I want this to come from my program where I have used MASTER_IDOC_DISTRIBUTE function module.
Generally, even though I get status 30 in the program, when I go and see in WE05, 03 status is displayed. But I don't know what happend this time, it is showing 30 status even in WE05 also.
Please tell me what could be the reason.
Regards,
Suman.

Hello,
Check if there are any dumps in the system
Or
if there are any authorization issues.
IF there are dumps, then the system usually stops autoprocessing the idocs and you might need to schedule the program at periodic intervals to get the idoc in status 03.
Thanks,
Sushil Joshi

IDOC status 03 but no XML generated

Hi Experts,
I am facing a problem related to idoc i.e. I am getting idoc status 03, still no XML created at the server directory.
Scenario is: A custom idoc is created with a z report which selects data & send idoc as an XML file in the server directory
IDOC (the first \ represents root as it is a unix server, 2nd \ is a saparator nd then IDOC is a folder to save XML files). Folder IDOC is having all permission(777). When i send idoc using the report is fives status 30 & after that when process it through BD87 it gives a status message 03.
I checked the partner profile, port etc. Even in port access test is OK.
I even tried putting directory as //IDOC , /IDOC but then no access possible error came. only work with
IDOC & gives status message 03.
But no idoc is reaching at the other end i.e.
IDOC.
Can anyone tell me how to fix this problem. Is the problem at SAP end of Unix end.
Regards,
Nik

Hi,
Check the Port configuration.In this case mostly problem form port configrations only.
Check Directory,Outbound file paramters in the port configuration.
Thanks,
radha.

IDOC Status, Tracking in SAP PI/PO Single Stack

Hi All,
My PO version: 7.4, SP4. I am not sure my questions below are still a limitation in current PI/PO single stack systems, and hence requesting your help for the same.
1) Is there a way we can track outbound idocs in SAP PI/PO single stack similar to PI abap stack IDX5? ( Note:- I couldn't find any option in IDOC monitoring in single stack SAP PO 7.4, SP4)
2) IDOC status is always 0 in SAP PO 7.4 single stack IDOC monitoring. I am not sure if this status is just specific to my PO system. Any setting needs to be applied?
ps: Please post only relevant answers/solutions
Thanks,
Praveen Gujjeti
Message was edited by: Praveen Gujjeti

Hi All,
As per SAP help: Comparison of IDoc Adapter (IE) and IDoc Adapter (AAE) - SAP NetWeaver PI Reference Documentation - SAP Library idoc status and tracking not supported in current PO versions. May be SAP will add this feature in upcoming PO versions
Auditing, Monitoring ,and Tracing Functions
Attribute/Feature
IDoc Adapter (IE)
IDoc Adapter (AAE)
ALE Audit
Supported
Supported
IDoc tracing
Supported (transaction IDX5)
Not supported
IDoc monitoring
Transaction IDX5
Integration with channel monitor and message monitor (as part of Advanced Adapter Engine monitor)
Status tracking -SYSTAT
(analysis and further processing of messages that have not been processed)
Not supported
Not supported
RFC monitoring
Supported
Not supported
Message persistence in the IDoc adapter
Supported
Message correlation information can be stored in IDoc adapter.
Not supported.
Message is persisted in messaging system with correlation data persisted in adapter.
Regards,
Praveen Gujjeti

Idoc status is in 12, but it does not reached to Target.

Hello Experts,
We are facing a problem with outbound Idoc.
The problem details are as below.
We have generated an Idoc(Without message Control) and dispatched it to external vendor. Idoc status is 12, when we check it in midleware(seebeyond) it does not reached.
There is no error with RFC and Port definition.
Could you please suggest us whats wrong with it or where its gone.
Thanks in advance.
BR//
Raghu

Hi Siva Prakash,
Thanks for your response.
There is no error with RFC, its working perfectly.
BR//
Raghu

Idoc status 53.Yet application data is not posted.

IDOC status is 53. But application data is not partially posted.iam generating 2 idocs, one for type INFREC01 and other for COND_A01. iam Generating IDOC using a fm IDOC_INBOUND_ASYNCHRONOUS. purchase info record is posted succesfully. but condition info record is not posted.
for both the idoc its shows green status-53. moreover data in EINA EINE KONH KONP is updating, but its not displayed in transaction ME13.
Kindly help me.

Hi,
Check the config stuff if you are usng the right IDoc...See partner profiles and the message types.
thanks

How to find Correct IDoc Status in SAP

Hi All,
I need some help on IDoc scenario, I have custom program to create Idoc and as well it will send IDoc to XI. I want to know idoc staus in the program to update custom table whether idoc sent successfully or not but idoc giving status as 03 (Data passed to port OK) irrespective of idoc send or not, actually idoc not sent to xi when I check SM58 showing error.
Please advice me how to find correct idoc status inside program itself.
**-----Create IDoc
CALL FUNCTION 'IDOC_OUTBOUND_WRITE_TO_DB'
    TABLES
      int_edidd      = i_edidd
    CHANGING
      int_edidc      = wa_int_edidc
    EXCEPTIONS
      idoc_not_saved = 1
      OTHERS         = 2.
COMMIT WORK.
i_edidc = wa_int_edidc.
APPEND i_edidc.
REFRESH i_edidd.
**-----Send Idoc
CLEAR i_edidd.
**-------Send Idoc to XI
CALL FUNCTION 'EDI_OUTPUT_NEW'
    EXPORTING
      onl_option = 'B'
      error_flag = ' '
    TABLES
      i_edidc    = i_edidc
      i_edidd    = i_edidd.
COMMIT WORK.
READ TABLE i_edidc INDEX 1.
**-----Update Dispatch order status based on Idoc status.
IF sy-subrc = 0 AND i_edidc-status ='03'.
    znxi01_update c_03 i_edidc-docnum.
    gw_success_record = gw_success_record + 1.
ELSE.               " Error in Data Transfer
    znxi01_update c_02 i_edidc-docnum.
    gw_fail_record = gw_fail_record + 1.
ENDIF.

Hi Anil,
for setting IDOC Status you can send back a IDOC of type <i>ALEAUD01</i>.
The function IDOC_INPUT_ALEAUD takes automatically this IDOC and writes the status to the origin IDOC.
Regards Mario

Need to change the Idoc Status based on the Text in the Idoc

Hi All,
I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly.
I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice.
I have mapped the response Text( Success or Fail) to one of the field in the Response Idoc, this is perfect.
Requirement:
1) If the Response Idoc Field receives Success Text means the Idoc Status shld be in Green Status.
2) If the Respnse Idoc Field Receives FAIL means the Idoc Status shld be in RED Status.
How can i Do this. please suggest me......
Regards

Hi Santhosh,
YES, I have to Capture the Response from Webservice in SAP R/3 by using STATUS.SYSTAT01 Idoc.
I have mapped the response from webservice to the one of the field in the Idoc.
If this field contains Success as text means the Idoc Status in We05 shld be 53 else it shld be 56
With out changing the FM code, can we use any other process to achieve this???
@ Mario
Can u please Allobarate your views more based on my requirement
Regards

IDOC status not changed

SAP support
I am not able to change the IDOC status...
I have also processed the IDOCs many times..
Guidance required...
Kamal

Dear Kamal
Please check your entry in SM12 an delete it and again reprocess it with the help of Tcode Bd87
Thanks
Amit Shivhare

IDOC status 54

Similar Messages

Maybe you are looking for