IDoc with incorrect data is expected to fail but does not

Hi All,
The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
exist. The IDoc is expected to fail and give an error message but has not done so.
We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
Would like to know why the IDoc is not failing when it has incorrect
data.
Thanks & Regards,

Hello,
the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
BR
Rene

Similar Messages

IDoc with incorrect data is expected to fail but it does not

Hi All,
The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
exist. The IDoc is expected to fail and give an error message but has not done so.
We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
Would like to know why the IDoc is not failing when it has incorrect
data.
Thanks & Regards,

Hello,
the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
BR
Rene

Why does Jaws works with the project when previewed in browser but does not when it is published?

I am using Jaws 15.0.110024 and Captivate 8 in windows.

Perhaps you need to add the published location to the list of trusted locations for the Flash Player?
Click here for info on how to do that
Cheers... Rick

With Firefox 3.6 , Yahoo mail opens but does not function properly

I can sign into and open my Yahoo mail account but can access nothing in the site.... like open new mail, send mail, etc.

See this: <br />
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

There are IDocs with incorrect status.How to rectify it?

Hi All,
I was trying to do full load for 0vendor_attr.
The error message is getting displayed as mentioned below:
" Error when updating Idocs in Source System*
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
*How you remove the errors depends on the error message you receive." *
Please revert.

The Error messages in detail:
Incomplete control parameter for commmunication with the BW system
                                                                                Diagnosis
                                                                                The control parameters for communication with the BW server are not
     complete. A BW PlugIn upgrade could be the cause of the problem.
                                                                                System response
                                                                                Procedure
                                                                                Depending on the Release of the BW server, proceed as follows:
     BW Server Release 1.2B: Source system: Update InfoSource metadata
     BW Server Release >= 2.0A: Source system: Activate
Please revert at the earliest what needs to be done int his case.

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Is there a mobile phone that can sync with ical, but does not require a data plan?

Is there a mobile phone that can sync with ical, but does not require a data plan?

Thanks for the reply. I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites. I was hoping there was an easier way.
John Maisey wrote:
Hi,
You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
Best wishes
John M

HT1347 I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3

I have an mp3 DVD with episodes of Gunsmoke. iTunes imports them, but does not sort them correctly by date or episode. One file name is GS 52-04-26 001 Billy the Kid.mp3. iTunes sorts them by month/day/year. How can I fix that?

The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success.

I'm able to transfer iPhotos from Mac to MacPro but data I've added to photos does not transfer. What am I missing? Tried using Thunderbolt, AirDrop, Flash drive with no success. Do I have to use iCloud for 800 vacation photos or re-enter all the data after transfer?

There is no support for mirroring or syncing iPhoto libraries or Aperture libraries. You can however export partial Aperture libraries on one mac and merge them into other libraries on a second Mac.
To transfer your edited photos open your photolibrary in Aperture and and collect the edited photos in an album. Then select the album and use the command "File export > Album as new library". This will export all edited photos as a new Aperture library. Copy this library to your other Mac and import it with "File < Import > Library to your other photolibrary on that computer (assuming you are having the same Aperture version on both macs). When merging the new library into your Aperture library, opt to keep the newer versions from the imported library. iPhoto 9.5.1 will be able to open these merged Aperture 3.5.1 libraries.

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images and no previews.

LR 4.4 on pc with Win7. Catalog is loading with all data and text and metadata but no images and no previews.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

IDoc with incorrect data is expected to fail but does not

Similar Messages

Maybe you are looking for