IDOCs : Not abe to add funciton module to Z Process code.

Hi,
I have created a new Z process code and was trying to add the function module to the process code. I can see the fucntion module in the list but when i select and press enter i get a error message " Application object type is not planned".
I have added the enrty for message type and function module in we57.
am i still missing something?
thanks.

Hi,
Maintain the entry in BD51 as well if its inbound.
Also check if you've specified the further details of the function while creating the we42 entry.
i.e logical messages and the IDoc packet and Object type, start event and end event.
regards,
Advait

Similar Messages

Not able to add login module to authentication stacks!

HI Portal Gurus!
we are implementing siteminder sso integration with portal.
Iam trying to do following configuration ...
Modify the ticket authentication template:
a.)Remove from the stack:
1)BasicPasswordLoginModule
2)EvaluateTicketLoginModule
b.)Add the following modules to the top of the stack, in the order shown:
SiteMinderLoginModule
CreateTicketLoginModule
Iam not able to do either reomove exting one nor add new login module.Iam getting an error"Unable to add login module to authentication stacks! "
Ilogged in to v.admin as administrator with admin & superadmin roles.
It would be great if anyone could help me in this .
Regards
tag

Hi,
in change mode only getting an error.
error"unable to add login module stack to authentication stacl! details are available in status bar"
in status bar information below...
Unable to add login module to the authentication stack!
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java(Compiled Code))
     at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java(Compiled Code))
     at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java(Compiled Code))
     at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java(Compiled Code))
     at com.sap.engine.services.security.server.AuthenticationContextImpl.setLoginModules(AuthenticationContextImpl.java(Compiled Code))
     at com.sap.engine.services.security.remoteimpl.RemoteAuthenticationImpl.setLoginModules(RemoteAuthenticationImpl.java(Compiled Code))
     at com.sap.engine.services.security.remoteimpl.RemoteAuthenticationImplp4_Skel.dispatch(RemoteAuthenticationImplp4_Skel.java(Compiled Code))
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java(Compiled Code))
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java(Inlined Compiled Code))
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
     at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
     at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
     at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:1057)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java(Compiled Code))
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java(Compiled Code))
     at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java(Compiled Code))
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java(Compiled Code))
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java(Inlined Compiled Code))
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
I would appreciate if anybody could help for resolving this issue.
Regards
Tag

Function Module for Outbound process code

Hi,
I have a scenario in which i have to send MBGMCR02 Idoc from SAP to XI.
I created a new Outbound process code and now I have to code the function module that populates data into the segments.
Does anyone have sample code for this, i.e code to put in the finction module of an outbound process code?

hi...
please find the below code.
*& Report ZPROGRAM11
REPORT ZPROGRAM11.
tables : likp,vbuk,vbfa,ibin,vbap,vbak,kna1.
types : begin of iy_tab,
         vbeln type vbfa-vbeln,
        vbelv type vbfa-vbelv,
       posnv type vbfa-posnv,
       end of iy_tab.
types : begin of iy_tab1,
vbeln type vbuk-vbeln,
wbstk type vbuk-wbstk,
end of iy_tab1.
types : begin of iy_tab2,
vbeln type vbak-vbeln,
kunnr type vbak-kunnr,
vkorg type vbak-vkorg,
vtweg type vbak-vtweg,
spart type vbak-spart,
end of iy_tab2.
data : i_ibase type ib_ibase.
data : i_kunnr type vbak-kunnr.
data : it_tab type table of iy_tab with header line,
it_tab1 type standard table of iy_tab1 ,
wa_tab1 type iy_tab1,
it_tab2 type standard table of iy_tab2 ,
wa_tab2 type iy_tab2.
data : t_edidd type standard table of edidd .
data : t_edidc type edidc.
data : t_edidc1 type standard table of edidc .
data : wa type edidd.
data : wa1 type e1edl20.
data : wa2 type zibase.
data : wa3 type e1edl32.
data : wa4 type e1edl44.
data : wa5 type e1edl37.
data : wa6 type e1edl28.
data : wa7 type e1edl30.
data : wa8 type e1edl24.
data : wa9 type e1adrm1.
data : begin of it_tab3 occurs 10,
       vbeln type iy_tab-vbelv,
       posnr type iy_tab-posnv,
       i_ibase type ib_ibase,
       end of it_tab3.
types :    begin of iy_tab4 ,
        valfr type ibin-valfr,
        ibase type ibin-ibase,
       amount type ibin-amount,
       unit type ibin-unit,
       end of iy_tab4.
       data : it_tab4 type standard table of iy_tab4,
              wa_tab4 type iy_tab4.
data : begin of it_tab5 occurs 10,
         vbeln type vbfa-vbelv,
         posnr type vbfa-posnv,
         ibase type ibib-ibase,
         valfr type ibin-valfr,
         amount type ibin-amount,
         unit type ibin-unit,
         matnr type vbap-matnr,
         kunnr type vbak-kunnr,
         vkorg type vbak-vkorg,
         vtweg type vbak-vtweg,
         spart type vbak-spart,
         name1 type kna1-name1,
         end of it_tab5.
      types : begin of iy_tab6,
             vbeln type vbap-vbeln,
             posnr type vbap-posnr,
             matnr type vbap-matnr,
            end of iy_tab6.
      data : it_tab6 type standard table of iy_tab6,
             wa_tab6 type iy_tab6.
types : begin of iy_tab7,
        kunnr type kna1-kunnr,
        name1 type kna1-name1,
        end of iy_tab7.
data: it_tab7 type standard table of iy_tab7,
      wa_tab7 type iy_tab7.
      data : wa_table type ytable1.
selection-screen: begin of block b1 with frame title text-t00.
parameters: p_vbeln type vbfa-vbeln.
selection-screen: end of block b1.
start-of-selection.
select vbeln vbelv posnv from vbfa into table it_tab
where vbeln = p_vbeln.
if sy-subrc eq 0.
        loop at it_tab.
    select vbeln wbstk from vbuk into table it_tab1
      for all entries in it_tab
    where vbeln = it_tab-vbeln.
        endloop.
endif.
loop at it_tab1 into wa_tab1.
    if wa_tab1-wbstk = 'C'.
      loop at it_tab.
        call function 'IBSD_CREATE_IBASE'
          exporting
            i_vbeln                     = it_tab-vbelv
            i_posnr                     = it_tab-posnv
            i_as_sold                   = '0'
            i_as_build                  = '0'
            i_capid                     = '0'
          I_CHANGE                    = ' '
           i_commit                    = 'X'
          I_COMMIT_WAIT               = ' '
         importing
           e_ibase                     = i_ibase
         exceptions
           order_not_found             = 1
           position_not_found          = 2
           nothing_to_do               = 3
           too_much_to_do              = 4
           missing_authorization       = 5
           foreign_lock                = 6
           others                      = 7
        if sy-subrc <> 0.
          message id sy-msgid type sy-msgty number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        else.
          move it_tab-vbelv to it_tab3-vbeln.
          move it_tab-posnv to it_tab3-posnr.
          move i_ibase to it_tab3-i_ibase.
          append it_tab3.
          if sy-subrc eq 0.
           select valfr ibase amount unit from ibin into table it_tab4
              for all entries in it_tab3
              where ibase = it_tab3-i_ibase.
             if sy-subrc eq 0.
               select vbeln posnr matnr from vbap into table it_tab6
                 for all entries in it_tab3
                 where vbeln = it_tab3-vbeln and posnr = it_tab3-posnr .
                 if sy-subrc eq 0.
          select vbeln kunnr vkorg vtweg spart from vbak into table it_tab2
            for all entries in it_tab
              where vbeln = it_tab-vbelv.
          sort it_tab2 by vbeln.
          delete adjacent duplicates from it_tab2 comparing all fields.
         if sy-subrc <> 0.
           select kunnr name1 from kna1 into table it_tab7
             for all ENTRIES IN it_tab2
             where kunnr = it_tab2-kunnr.
             endif.
           endif.
           endif.
           endif.
           endif.
      endloop.
    else.
      exit.
   if sy-subrc eq 0.
   endif.
    endif.
endloop.
loop at it_tab3.
    move it_tab3-vbeln to it_tab5-vbeln.
    move it_tab3-posnr to it_tab5-posnr.
    move it_tab3-i_ibase to it_tab5-ibase.
    if sy-subrc eq 0.
      read table it_tab4 into wa_tab4 with key ibase = it_tab3-i_ibase.
      move wa_tab4-valfr to it_tab5-valfr.
      move wa_tab4-amount to it_tab5-amount.
      move wa_tab4-unit to it_tab5-unit.
      if sy-subrc eq 0.
        read table it_tab6 into wa_tab6 with key vbeln = it_tab3-vbeln posnr = it_tab3-posnr.
        move wa_tab6-matnr to it_tab5-matnr.
        if sy-subrc eq 0.
          read table it_tab2 into wa_tab2 with key vbeln = it_tab3-vbeln.
          move wa_tab2-kunnr to it_tab5-kunnr.
          move wa_tab2-vkorg to it_tab5-vkorg.
          move wa_tab2-vtweg to it_tab5-vtweg.
          move wa_tab2-spart to it_tab5-spart.
          if sy-subrc eq 0.
            read table it_tab7 into wa_tab7 with key kunnr = wa_tab2-kunnr.
            move wa_tab7-name1 to it_tab5-name1.
            append it_tab5.
            endif.
          endif.
      endif.
      endif.
     append it_tab5.
      endloop.
    loop at it_tab5.
      move it_tab5-vbeln to wa_table-vbeln.
       move it_tab5-kunnr to wa_table-kunnr.
        move it_tab5-vbeln to wa_table-vbeln.
         move it_tab5-ibase to wa_table-ibase.
          move it_tab5-matnr to wa_table-matnr.
           move it_tab5-valfr to wa_table-valfr.
            move it_tab5-unit to wa_table-unit.
             move it_tab5-amount to wa_table-amount.
              move it_tab5-vkorg to wa_table-vkorg.
               move it_tab5-vtweg to wa_table-vtweg.
                move it_tab5-spart to wa_table-spart.
                move it_tab5-name1 to wa_table-name1.
                insert ytable1 from wa_table.
                endloop.
*INSERT ytable1 FROM TABLE it_tab5.
    loop at it_tab5.
    wa1-vbeln = it_tab-vbeln.
    wa1-vkorg = it_tab5-vkorg.
    wa-segnam = 'E1EDL20'.
    wa-sdata = wa1.
    wa-hlevel = 2.
    append wa to t_edidd.
loop at it_tab3.
    wa2-i_ibase = it_tab5-ibase.
    wa2-i_qty = it_tab5-amount.
    wa2-i_dat = it_tab5-valfr.
    wa-segnam = 'ZIBASE'.
    wa-sdata = wa2.
    wa-hlevel = 3.
    append wa to t_edidd.
           endloop.
wa9-name1 = it_tab5-name1.
wa-segnam = 'E1ADRM1'.
wa-sdata = wa9.
wa-hlevel = 3.
append wa to t_edidd.
    wa-segnam = 'E1EDL28'.
    wa-sdata = wa6.
    wa-hlevel = 3.
    append wa to t_edidd.
    wa-segnam = 'E1EDL30'.
    wa-sdata = wa7.
    wa-hlevel = 4.
    append wa to t_edidd.
    wa3-kunnr = it_tab5-kunnr.
    wa-segnam = 'E1EDL32'.
    wa-sdata = wa3.
    wa-hlevel = 5.
    append wa to t_edidd.
    wa8-meins = it_tab5-unit.
    wa8-vtweg = it_tab5-vtweg.
    wa8-spart = it_tab5-spart.
    wa-segnam = 'E1EDL24'.
    wa-sdata = wa8.
    wa-hlevel = 3.
   append wa to t_edidd.
    wa-segnam = 'E1EDL37'.
    wa-sdata = wa5.
    wa-hlevel = 3.
    append wa to t_edidd.
    wa4-vbeln = it_tab5-vbeln.
    wa4-posnr = it_tab5-posnr.
    wa4-matnr = it_tab5-matnr.
    wa-segnam = 'E1EDL44'.
    wa-sdata = wa4.
    wa-hlevel = 4.
    append wa to t_edidd.
    endloop.
    t_edidc-mandt = sy-mandt.
    t_edidc-direct = '1'.
    t_edidc-rcvpor = 'A000000062'.
    t_edidc-rcvprt = 'LS'.
    t_edidc-rcvprn = 'O2C_ASSET'.
t_edidc-rcvpfc = 'LS'.
    t_edidc-sndpor = 'SAPSIT'.
    t_edidc-sndprt = 'LS'.
    t_edidc-sndprn = 'T90CLNT090'.
t_edidc-sndpfc = 'LS'.
    t_edidc-mestyp = 'DELVRY'.
    t_edidc-idoctp = 'DELVRY03'.
*t_edidc-rcvpfc = 'LS'.
t_edidc-sndpfc = 'LS'.
    t_edidc-cimtyp = 'ZDELVRY03'.
    append t_edidc to t_edidc1.
    call function 'MASTER_IDOC_DISTRIBUTE'
                               exporting
                                 master_idoc_control                  = t_edidc
                             OBJ_TYPE                             = ''
                             CHNUM                                = ''
                               tables
                                 communication_idoc_control           = t_edidc1
                                 master_idoc_data                     = t_edidd
                              exceptions
                                error_in_idoc_control                = 1
                                error_writing_idoc_status            = 2
                                error_in_idoc_data                   = 3
                                sending_logical_system_unknown       = 4
                                others                               = 5
    if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      else.
      CALL FUNCTION 'DB_COMMIT'
      CALL FUNCTION 'DEQUEUE_ALL'
      EXPORTING
        _SYNCHRON       = ' '
      COMMIT WORK.
    endif.
     endloop.

Transaction code to assign the function module to the process code

Hi,
What is the transaction to assign the function module to the process code

Hello Preethi,
Try with these Tcodes:
<b>
WE41                           0000 Process codes, outbound
WE42                 RSECODIN 1000 Process codes, inbound
WE43                           0000 Funct.module: Status record display</b>
If useful reward.
Vasanth

ALE - Idoc not getting processed automatically, instead going fine in Debug

Hello All,
I have a problem with Inbound idoc processing.
IDoc settings were made 'immediate processing' in WE20, and the process code is set correctly and the attached of Z-Fun. module to process the idocs to process code.
The error in inbound side is as 'Function module not allowed: APPL_IDOC_INPUTI' 51 status. Am sure i have to do some thing with ALE settings.
Can some body help me with correction step or sequence of steps for this ALE process.
Thanks & Regards, Jilan

Hi Jilan,
Plz follow the steps:
ALE Configuration:
     WE30 - IDOC type creation
     WE31 - Create segment
     WE81 - Message type creation
     WE82 - Link IDOC type to Message type
     SE37   - Create Inbound Function Module
     BD51 - Maintain entry for Function Module
     WE57 - Maintain
     BD57 - Link Function Module, IDOC type and Message type
     WE42 Create Inbound Process Code
     BD67 - Link Process code to Function Module
     WE20 - Create Partner Profile
     BD64 - Display Distribution Model
     WE02 - IDoc List, Display all Inbound/Outbound IDocs
     WE14 - Outbound Processing of IDocs
     BD20 - Inbound Processing of IDocs
1st Step:   Create a Segment ( WE31)
         Segment is a structure for passing data in IDoc. It actually contains the IDoc data, just like the DDIC table/structure. Segment is created with all the required fields. Then Save it. But, to actually use this Segment, you have to Release the Segment, otherwise u cant use the Segment, by menu, EDIT--> Set Release.
         Now, if you want to do some change to this Segment, u cant, unless & until u Cancel the Release, by Edit--> Cancel Release.
2nd Step:   Create IDOC Type ( WE30 )
        After creating the Segment, now we have to create the IDoc Type. IDOC Type is like an envelop of a letter, which contains the data inside it, & also some more information like address. IDoc type can be Basic Or Extended.
       Basic IDoc Type: Using some SAP existing IDOC type (ex. MATMAS) or Custom IDOC type.
       Extension IDOC Type: When we need some fields extra to an existing IDOC type, then we can extend that Basic Idoc Type by another Segment. This is called Extended idoc type
3rd Step:   Create Message Type (WE81)
     Message Type is like the Postman for sending the Letter.
4th Step:   Attach Message Type to the IDOC Type (WE82)
5th Step:   Create a Function Module (SE37)
       Write the Processing logic in a Function Module.
6th Step:   Mention the IDOC Type, i.e, 0/1/2 (BD51)
7th Step:   Assign the Message Type, IDOC Type & Function Module (WE57)
8th Step:   Create a Custom Process Code (WE42)
9th Step:   Attach the Function Module to the Process Code (BD67)
10th Step: Execute Inbound IDOC s (WE19)
Example Function Module: IDOC_INPUT_ORDERS (Standard FM to create Sales Order).
reward is useful,
regards,
Tanmay

Process code's function module required for the IDOC Message type PROACT

Hi,
I am trying to trigger an IDOC from ME32K transaction which will carry my Contract agreement details to XI. The IDOC I am using for this purpose is PROACT.PROACT01. But I couldn't find the outbound process code / Function module for the process code associated to this IDOC message type.
Pls help me out....
Thanks,
Ram Kalyan

I checked table EDIFCT for the message type and found this:
Function module Function type Basic type Message Type
IDOC_INPUT_PROACT F PROACT01 PROACT
Oops...I think you are looking for outbound..Ignore

Idoc - Error Status 51: Incorrect function module called up

Hi,
In the receiver system for the custom message type, I got this error.
Incorrect function module called up
Can any one pls help me to solve this one.
Regards,
Bala Raja

Hi Bala,
     Check the inbound function module attached to process code in receiving system. Generally in every inbound function module first check is coded for checking message type or for checking funciton module like below.In the receiving system go to WE20 and then select the partner and select inbound message type. in that double click on assigned process code.then you have to double click on displayed FM. In that fm check first few lines. You will find this error message.
LOOP AT IDOC_CONTRL.
    IF IDOC_CONTRL-IDOCTP(6) <> 'DESADV'.
      MESSAGE ID 'E0' TYPE 'E' NUMBER '029'
      WITH IDOC_CONTRL-IDOCTP ' ' 'IDOC_INPUT_DESADV'
      RAISING WF_ERROR_PROCESS.
    ENDIF.
ENDLOOP.
Thanks & Regards,
Kalyan.

Process code for IDOC Output from MIRO

Hi,
We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
Further we understand that process code SD09 is used for SD billing and Invoice process.
We need your help in
1. getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
2. If we need to configure one process code, let me know the correct function module for the same.
Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

Hi Shankar,
Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
we are testing with IDoc type INVOIC02.
once again thanks for sharing the process code.
Regards,
Brahma

Idoc inbound processing - Combine process codes

Hello,
i have the following problem. I receive an idoc from system a) and i want to process the idoc in the HR system and afterwards I want to forward the idoc to System B).
If i use HRMD as process code for in the partner profile on the HR system - the idoc which contains an user id is processed but not forwarded.
If i use ED08 as process code instead of HRMD the Idoc is forwarded but not processed.
But i need both - is there a possibility to combine two process codes although one is only a function module ant the other one is a workflow?
It would be great if anyone can help me.
Best regards
Ariane

Hi,
a function module was created and that works out well as long as one idoc contains only one E1PLOGI segment.
System A sends the Idocs due to change pointers. Is there a chance to do settings so that only one employee is distributed per idoc?
Thanks a lot in advance

Wht is process code in idoc

plz tell me the meaning and necesity of processcodes(we41 and we42) in idocs.

hi
good
Definition
Another name for a specific process, for example function module or workflow. IDocs are read or written in this process.
Use
In the partner profiles, the processing is never addressed directly but rather always via a process code. You can therefore replace an old process with a new one for any number of partners by assigning the existing process code to the new process.
Two types of process code are used in conjunction with the partner profiles:
Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc interface. The process code names the relevant function module.
Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
If you do not know what process code is relevant for your business process, but you know the message type, then you can display the process code defined for this message type: Choose Documentation ® Process codes in the initial node of the IDoc interface or use the F4 Help in the partner profiles after you have entered the message type.
There are also the process codes for exception handling:
System Process Code - names the workflow which is triggered in inbound or outbound processing when an exception occurs.
Status Process Code - names the exception workflow which is triggered when an incorrect status is returned by the external system.
These two types are configured centrally and not on a partner-specific basis and therefore do not have to be maintained when a new process is defined. They were introduced for the sake of completeness, so that each process in the IDoc interface is addressed via a process code.
http://help.sap.com/saphelp_46c/helpdata/en/dc/6b804043d711d1893e0000e8323c4f/content.htm
thanks
mrutyun^

IDOCs - Simple doubt in INBOUND DELVRY. IDOC-DELVRY03, Process code isDELV?

Hello Experts,
Our SAP system receives the Inbound IDOC for Delivery from Gentran.
Further details are,
Process code: DELV
IDOC type: DELVRY03
Message type: SHPCON
Message code: TOC
Parther profile: Account # of Ship To party
So, my requirement is that,
If this Inbound Delivery IDOC contans the Message Code as TOC, I need to insert/add my logic
so, let me know that,
1) Request u that, let me know How to go ahead, becoz am new IDOCs, like, Is I need to look for the any Usre Exit? I mean, At Wht point I need to add my code in this whole process?
thank you
Edited by: Srinivas on Jun 29, 2008 11:15 PM

Hi Srinivas,
Use the below user exit for creating a STO order.
CALL CUSTOMER-FUNCTION '003'
       EXPORTING
            IDOC_CONTROL        = IDOC_CONTRL
            IDOC_DATA           = IDOC_DATA[]
            DELIVERY_HEAD       = S_KOKO
            DELIVERY_ITEM       = T_KOPO[]
            PACKING_HEAD        = T_VSEK[]
            PACKING_ITEM        = T_VSEP[]
            PROCESSING_STATUS   = F_STAT
       IMPORTING
            WARNING_IGNORE      = F_FLAG
       CHANGING
            PROCESSING_PROTOCOL = T_PROT[]
       EXCEPTIONS
            OTHERS              = 0.
Because by the time you get to this point, the delivery document is created. I believe you need to create the STO order only once the delivery document is created.
Thanks,
Mahesh.

Doubt in IDOC Regarding Process codes

Please check the link
http://idocs.de/www5/books/IDocBook/cook_A5.pdf
In page no: 32 (Topic: 8.5 Assigning a processing function ) ,FM is assigned directly to Message type and Idoc type combination.
But in the next page, Process code is created for that FM and Asigned that process code to message type and Idoc type combination.
What's the differece.
Another thing is in which transaction we assign Process codes to Message type and Idoc type Combinations
Above tutorial looks like old version. In my system Transactions are looking different ,than they are in Tutorial. I am working in version 5.0. If possible, Please provide me perfect material.

Hi
Process code always points to a Function module
Means it calls the fun module
In We41/42 you creata process code and assigns to a Message type
so means that Process Code, Idoc Type and Message type are interlinked
Even you can check in WE20 partner profile
in the Outbound
double click on the Message type and press message control , it shows the process code attached
and double click on the process code it shows the fun module attached to it.
Reward points if useful
Regards
Anji

Custom Function Module for the New Process Codes

I want to distribute the custom table data . For that i have written the program using MASTER_IDOC_DISTRIBUTE. I have created the custom message & idoc types along with their assignments.
I got struck up at the process code. I have to assign the function module for that process code. Can anyone kindly help me in writting the code at that function module ?

Hi Friends,
My requirement is , i need to transfer the table records. For that i have created the Message/Idoc Types and also created the Partner profile and the Distribution model view .....all alll i have done.
My doubt is , in the we20, at the outbound parameters , i can give the Message/Idoc types that i have created. Ok thats fine
But at the inbound parameters, i have to give the inbound process code. So i have created the Inbound process code. As we know that for every process code a function module is attached, now i have to create the function module which posts the records in receiver side.
so 1. Does the Function module need to be RFC Enabled ?
2. Do we need to create Object type in SWO1 once i
create and release the function module ?

Process code in IDoc processing

Hi!
I can use WE42 to define my own process code, for example ZINV, but where to define its 'behaviour',
which is maybe coding or anything else?
Many thanks,
Aries

Hi Lakeshman,
Thanks for your help.
When define my own process code in WE42, there is a step that assign a function module to my process code at Identification field, but I cannot find my self-defined function module in the dropdown list.
What is the relationship between WE57 and WE42?
And in WE20 inbound processing, there is no basic type just process code, which seems inconsistent to WE57.
Regards,
Aries

Assigning of process code to function module

hi all,
please let me know where to go for assigning teh process code to function module. i am unable to get the function module from the process code(we42). please let me know
thank you
chan

In WE42 itself we can assign the process code to a FM.
select new entries.
Enter a process code name & description.
Enter Ur FM in Identification Field.
Now select Processing by Function module in Processing type.
Save it.
For outbound do the same thing in WE41 tcode

IDOCs : Not abe to add funciton module to Z Process code.

Similar Messages

Maybe you are looking for