IDocs sent to XI, processed only some, others in status Scheduled for o/b..

Hi guys!
We have a scenario, where Idoc is sent from r/3 into XI, here enters integration process, where the idoc is mapped to soap req, sent sync to web service, ws response is mapped to other idoc type and integration process sends data to r/3.
The problem is, when more idocs are sent into xi from r/3 in short time. Some idocs are processed correctly, but some remain in status - Scheduled for outbound processing. When the same idoc (same data etc) is sent later, separately, the data (process) is processed succesfully.
Any ideas, what could be wrong?
Thanx a lot! Olian

Hi Olian,
This problem occurs when XI has not received the response from the webservice and it gets timed out.  You can monitor this in RWB - Message Monitoring.
Have a look at this weblog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Hope this will help you in resolving the issue.
Regards
Sreenivas

Similar Messages

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • HT4889 Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or not

    Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing

    LBraidwood wrote:
    Is it possible to use the migration assistant to transfer only some documents and data? For example, I was to transfer my music, but not my word documents. There doesn't seem to be any options to customise what you are transferring - its all or nothing
    Yes, that's why I recommend one have more than TimeMachine as a backup because if certain files or folders are corrupted on the TM drive, your not logging into your migrated user account or not be able to transfer it what so ever.
    Then it's a REAL PAIN and costs $99 to bit read the TM drive to get the files out, then it's mess to go through and sort all the empty placeholders from the real files as TM doesn't save duplicates in each state, just uses the previous state's copy if there are no changes.
    If you create the same named user account on the new machine, and simply transfer files via a USB thumb drive and place say music contents into the Music folder, then it will work too.
    Look into making clones of your boot drive, the benefit here is it's bootable, you can access the drive directly to pick and choose files, run the computer just like before etc.
    Most commonly used backup methods explained

  • My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    Hi there,
    Can you please share your Captivate version?(Help>About Adobe Captivate)
    Thanks,
    Nimmy Sukumaran.

  • Message in status "scheduled for outbound processing"

    Hi,
    I was tring to perfom volume test. The scenario is XMLFILE --> XI --> IDOC(R/3). I reduced the polloing interval to 2secs and it went well for 15 min. Later I left it like that for an hour and found that all the messages are queued up scheduled for processing. I checked SMQ2 there were lot of messages. I deleted them all and then activated the queuse through SXMB_ADM ->Manage Queues transaction. In the QRFC Monitor I see the scheduler status as Inactive. I tried to make it active, it starts and becomes inactive again. Still I can see all the messages in SXMB_MONI. Are there any specific steps that we need to perform to clear the queues.
    Thanks.
    Srinivas Vaidyam

    Hi,
    it's normal for transaction SMQR to show the scheduler in status "Inactive" (it just happens not to be running at the  
    time you enter SMQR, a moment later you might have found it to be running).
    Rather than just deleting all the queues you should have clicked on the queue name for a waiting message from SXMB_MONI (in the default SXMB_MONI display mode you need to scroll a bit to the right to the see which queue a message is in). Drill down on the next screen (double click the queue name etc.) to see a list of all queued messages including a brief description of why the first message got stuck. You can now either "retry" or "delete" the message. Then go back one screen and unlock the queue (open lock icon) if you find it not to be in the status running. Refresh the display to make sure that messages get processed.
    Of course these steps do not need to be performed manually. There's an automatic retry mechanism and if that repeatedly fails the report RSXMB_RESTART_MESSAGES (which you will need to schedule) will try to resend the messages.
    You should now cancel all messages belonging to this testrun in SXMB_MONI. Make sure that none of the queues are blocked and restart your test.
    Regards,
    Hans Christian

  • Process only some files

    Hi Friends,
    I had a new requirement.
    There are 2 systems sending files to XI.
    First system will send a file to XI.
    This File will contain only the file names which must be processed from the second system.
    Then XI must pick only those files from the second system.
    Then these files will be processed and delivered to other system.
    Is it possible without using BPM.
    If yes pls let me know.
    Even using BPM also pls let me know the design.
    Thanks in advance.
    Regards,
    Swapna.

    >
    swapna wrote:
    > Hi Friends,
    >
    > I had a new requirement.
    > There are 2 systems sending files to XI.
    > First system will send a file to XI.
    > This File will contain only the file names which must be processed from the second system.
    > Then XI must pick only those files from the second system.
    >
    > Then these files will be processed and delivered to other system.
    >
    > Is it possible without using BPM.
    > If yes pls let me know.
    > Even using BPM also pls let me know the design.
    >
    > Thanks in advance.
    >
    > Regards,
    > Swapna.
    this isnt a easy scenario
    anyway your design should be as follows;
    1. use file sender cc and read the first file.
    2. in the data you will get all the file names you need to process.
    3. code a java proxy to connect to the other system. use the data from the first file to read all required files.
    4. continue to process as you need.
    this would ideally need a BPM to make a sycn java proxy call.

  • Hotspot click for only some rows in ALV grid for a particular column ?

    Hi there,
            In ALV grid, we can make Hotspot enable for all rows in a specified column
    by specifying in the fieldcatalog with Hotspot attribute set as true.
    But I want to enable Hotspot only for certain rows in the particular column. I tried with MC_STYLE4_LINK , but I didnt got the required result.
    So , how could I achieve that in ALV grid.
    Points would be rewarded for helpful answers.
    Regards,
    Anil .

    Hi,
    You can do it for a column. Please refer to the code snippet below,
      DATA : it_fcat TYPE lvc_t_fcat,
             wa_fcat LIKE LINE OF it_fcat.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
      I_BUFFER_ACTIVE              =
         i_structure_name             = 'SMMW_ALERTS_ICON_S'
      I_CLIENT_NEVER_DISPLAY       = 'X'
      I_BYPASSING_BUFFER           =
      I_INTERNAL_TABNAME           =
        CHANGING
          ct_fieldcat                  = it_fcat
       EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
    LOOP AT it_fcat INTO wa_fcat.
      IF wa_fcat-fieldname = 'STATUS'.
        wa_fcat-hotspot = 'X'.
        MODIFY it_fcat FROM wa_fcat.
        CLEAR wa_fcat.
      ENDIF.
    ENDLOOP.
    CALL METHOD l_obj_alv_grid->set_table_for_first_display
          EXPORTING
        i_structure_name              = 'SMMW_ALERTS_ICON_S'
       CHANGING
            it_outtab                     = lt_alerts_st
            it_fieldcatalog               = it_fcat.
    In the above replace the structure 'SMMW_ALERTS_ICON_S' with your structure and column 'STATUS' with your desired column.
    Hope this helps,
    Regards,
    Vinodh

  • HRMD_A Idocs sent to XI has status 39

    Hi,
    Our HRMD_A idocs used to have status 03, but after we started using XI , most of them have status 39 and they are being processed correctly. But some other programs are checking for status 03.
    How does this Idoc status gets changed or effected after using XI?
    Any ideas on that?
    Thanks in advance.

    Hi Anjana
    We are trying to integrate HR master data with a legacy system and we are using chnage pointers for that. Did your scenario use change pointers to trigger HRMD Idocs ? if so I would appriciate ur help. I did all steps for setting up change pointers , but can't  get the change points trigered when some thing is changed.

  • "Scheduled for Outbound processing" message

    Hi,
    My scenario is: R/3 (IDoc Customer) -> XI -> PC (file) and I use a BPM with option "multi to single".
    In the Message Monitoring, I have two steps:
    1. Idoc DEBMAS06 --> BPM:
    status = "Processed successfully". Thus it's ok.
    2. BPM --> my PC:
    status = "Scheduled for Outbound processing" and in column "outbound" I have not "IENGINE". There is no other error message and obviously no data are sent to my PC.
    Have you already seen this message?
    And have you a solution?
    Note: Last friday, the same scenario was ok. I have just changed some data inside the mapping (occurence was not change).
    Mickael.

    Hi,
    Try resetting the status to "Ready".
    If you get SYSFAIL again, try deleting that particular LUW. If there are other messages waiting in the queue, just click on the unlock queue button and the remaining messages will flow thru.
    Regards,
    Sridhar

  • Message stuck in SXMB_MONI  status " Sceduled for Outbound Process." Urgent

    Hello All,
    All messages in our XI environment are getting stuck with status Scheduled for Outbound Processing ...I have already done the following..
    1) Registered the Queues
    2) Deleted entries in SMQ1 and SMQ2  and restarted messages
    Last time we had this issue, we were finally able to reslove it by doing a J2EE restart.  But this has resurfaced again within a week, and this time even the restart is not working. 
    Do you think some parameter has been set incorrectly during the install ..
    Any help would be appreciated ..
    thanks
    Mayank

    Hey Mayank,
    Did you got JCO failure error for any of XI message before start of getting this error message?
    If so it's failing because of RFC connection problem...
    You need to go to Tcode : SM59 in your xi server
    check the TCP/IP Connections which is created while post-installation phase..
    1. AI_RUNTIME_JCOSERVER.
    2. AI_DIRECTORY_JCOSERVER
    Solution :  Increase the default value for CPIC_MAX_CONV (se note 314530).
    Hope this wull solve your problem.
    Nilesh

  • I just tried to import photos from iphone to MacAir  but only some came across, many others as dark space. The app thinks I have transferred them all but I want to redo the process and it is not obvious how to do that. I deleted the dark images  already,

    How may I reimport photos from my iphone 4s to the MacAir iPhoto as only some images came across.. It is not obvious to me, like it is with other programs I have used.

    Also, you can have Image Capture automatically open when you connect the phone or any camera. To do that you need to open iPhoto on your Mac (yes, the setting is in iPhoto and that is a bit strange).
    Why do I have to buy iPhoto to get to a setting so that I don't have to use iPhoto?!?! Not very Apple-like.
    If the device is attached and highlighted in Image Capture, the setting is in the bottom left corner.

  • HRMD_A idocs sent and processed, but Org chart doesn't reflect it sometimes

    From our HR box, we send HRMD_A idocs to our FI box - We have an intermittent issue where we have a position change & the idoc gets created & sent over.
    On the inbound side, the idoc gets posted successfully with Status 53. However, this EE does not appear in the org chart as it does on the HR side.
    We have these IDocs set up to process immediately, so it passes to the FI port and is processed all within a few seconds.
    We come across this issue once about every 3-4 weeks and I can't seem to get anywhere trying to resolve it.
    any ideas?

    There are two main annoying problems with Flash Builder and swc's:
    1.  Flash Builder doesn't reflect changes made to swc files
    Solution : First of all - keep your swc files inside your project folder, you can also disable global swc cache: change as3api.cpp code,refresh swc in flashBuilder bug!
    2. Flash Builder breakes content inside swc files (and also popular problem "TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@1f21adc1 to...")
    Solution : locate the project .actionScriptProperties file and set useFlashSDK=”false” :  Flash Builder 4.7 – useFlashSDK | In Flagrante Delicto!
    In this case you can also download latest Apache Flex SDK to target new Flash player versions: http://flex.apache.org/
    Hope this helps!
    P.

  • Idoc to be processed only when vl32n has been posted

    Hi All,
    I want the IDOC to be processed only when VL32N is been posted
    Regards
    Amey Kulkarni

    a

  • Labview RT Desktop PC Licence only on floppies or some other medias

    On 09-03-2006 i posted a message with subject " Labview RT on Third Party PXI with no floppy drive".
    Rick Kuhlman responded to this message and provide me with PXI booting procedure from USB. BUT My
    Main query is this that Labview RT Licence for Desktop PC is only provided on floppies or also provided on some other media
    like USB/CD ROM etc .
    the procedure " MAX->TOOLS->RT PXI Disk utilities " only prepare floppies not USB/CD-ROM. please tell me any other procedure
    which make me capable of making RT Target with help of USB/CD-ROM instead of Floppies.

    This KB goes through the process of creating a USB boot disk. Unfortunately you still have to have a computer that has a floppy drive in order to make the boot disk. Then you transfer from the floppy to the USB, and use the USB to boot the PXI controller to install RT.
    Following the steps in this KB will give you a USB boot disk.
    http://digital.ni.com/public.nsf/websearch/D3AD6D3​474D09C5E86256E130079C1B0?OpenDocument
    Hope this helps,
    Rick Kuhlman

  • Error when trying to add remote process chain related to some other system.

    Hi Gurus,
    I am trying to add process chain related to some other system in BW production through remote process chain but i am getting the issue " :RSM:918 YCPG_WEEK_GESPL_BW APO_DP_RTR DEFINITION 23" while checking or activating the same.i am able to add successfully in quality environment but getting the issue in only in production..I just tried to add some other chains too but i am getting same error for other chains which are related to same system.this means issue is present for all the chains related to that system.
    Can you please help me how to resolve the above as it is very urgent for me?.
    waiting for oyur response.
    Thanks,
    Nani

    Hi,
    Connection is working fine.we already checked RFC connection earlier itself.we have not find the same issue in quality environment i.e when we try to trigger same chain in corresponding quality environment it's working fine.where as when we are trying to checking/activate the same chain in production through remote process we are getting the above issue.
    Please help me to resolve the issue.
    Thanks,
    Nani

Maybe you are looking for