IDVD Sound Not Being Migrated From iMovie

I created a movie in iMovie, then shared it with iDVD. The audio is fine in iMovie, but in iDVD it is silent. I tried exporting my iMovie to Quicktime and the Quicktime movie gets generated with the sound without any trouble. Does anyone have any idea what is going wrong here?

By any chance have you muted the sound in your iDVD project? Check the slider bar below the menu display.
Also, instead of sharing to iDVD, try dragging your iMovie project icon (the one with the star on it) into your iDVD. Just drag it to the edge of the iDVD display screen, or you can put an Add Movie button onto the menu screen and drag your iMovie icon to that button.

Similar Messages

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

Cases where messages are not being consumed from a queue

MQ 4.0
I have a cluster of 3 brokers. Java clients use RANDOMIZE to connect to the cluster of brokers. Message selectors are not used. My consumers are all synchronous, and connection.start() is called prior to calling MessageConsumer.receive().
What I have seen on random occassions are messages not being consumed from the queue. The problem seems to be sporadic.
I was thinking that the reason it is sporadic is because of the RANDOMIZE configuration of the client connetion / object-store.
That is, there is a possibility for the following to happen:
1) There were messages produced on a queue on broker A, but before these messages were consumed, all the consumers have been shutdown. Thus, the messages on queue stayed on broker A .... and have not been copied / clustered to the other brokers in the cluster ( As per online documentation, a queue is "copied" to other brokers only when there is a consumer for that queue on the other brokers ).
2) Then the client applications started up produced and consumers again. This time, the producers were all connected to broker B, and all consumers for the queue were also connected to broker B.
3) Because there are no other consumers for the queue on the other brokers, the messages in the queue on broker A are never consumed.
Can someone confirm that this is a possibility ?

Well ... it does seem to be the case.
I changed the object-store so that instead of using RANDOMIZE for imqAddressListBehavior, it uses PRIORITY. Therefore, all clients ( producers and consumers ) will connect to only 1 broker out of the 3 in the cluster.
After restarting all JMS clients with the new imqAddressListBehavior, there were messages in various queues in the other brokers that were not being consumed, because there are no longer any consumers on any of the other brokers.
All the messages in that broker that all JMS clients connect to are being consumed ...
Except for about 6 messages that stays in the queue for whatever reason. All consumers receiving with receive( 10000 ), and after consuming all messages above the 6, it returns without any more messages in the queue.
Well ... so much for cluster of brokers. I'll have to think of an alternative.

Invite Email not being sent from iCal from a Google Apps calendar

Hello,
I am running Mac OS X 10.6.5, iCal 4.0.4, and am attempting to do the following from a Google Apps calendar I have setup in iCal. Please note that it's not gmail, it's Google Apps. If that makes a difference. That being said...
I am trying to create a meeting invite from iCal. I am able to create the invite and add attendees with no problem. When I hit send (from iCal), the invitees do not receive an email notification of the event, but it does appear their calendar (both in iCal and via Google Calendar on the web). I need an email to be sent to the invitees that they have been invited to a meeting, not just to have it appear on their calendars.
When I create the meeting invite via Google Calendar on the Web the invitees do receive an email notification (as specified in their calendar preferences). The issue only happens when the meeting invite is created in iCal.
When an invitee accepts or declines a meeting via iCal I receive an acceptance or declining email. Just not when the meeting invite is sent.
Also, I am able to create a meeting on one of the "On My Computer" calendars in iCal, invite people, and a meeting invitation is sent as expected.
And again, the invitees have notification of meeting invites turned on in their calendar settings (as is shown by the fact that when the invite is sent out via Google Calendar on the Web they receive an email with the invite).
Thanks! Any assistance would be awesome.
Aaron

That was actually my post on the Google forums
Here is what I have found so far (and hopefully some of my assumptions are correct, because we're making the full switch to Google Apps this weekend and I am assuming it will work after this). This is long, but I'm trying to be thorough. Also note that I have updated to 10.6.6 since the time I first posted my last message.
We are currently piloting Google Apps, so our primary domain (which I will refer to from now on as domain.com) still points to our old exchange servers. Mail is currently being delivered to our Google Apps pilot accounts the following way:
1. User sends an email to [email protected]. This email is delivered to our old Exchange servers.
2. Once the email is received on our old Exchange servers it gets forwarded to our Google Apps test domain (gtest.domain.com).
This seems to be an important piece of the puzzle as our primary domain (domain.com) shows up on the Google Apps for Admin dashboard as improperly setup (which is correct, because we're currently piloting)
So, in iCal I have my Google Apps account setup (I'm one of the pilot users) the following way. I added the Account as Google calendar in iCal, but once the account shows up it shows up as a CalDAV account.
Under the account information tab:
CalDAV
Description: [email protected]
User name: [email protected]
Password: my password
Under the server settings tab (*NOTE: these were entered in automatically when I setup the calendar as a Google calendar)
Server address: www.google.com
Server path: the path to my calendar.
Use SSL is checked
Use Kerberos v5 is NOT checked
So, during my testing I was sending meeting invites from people who were in the Google Apps pilot to other people who were in the Google Apps pilot. When I was doing that, no invitations were getting sent.
I created a new email account on our exchange server ([email protected]) but did NOT set it up to be a part of the Google Apps pilot (this means that emails were not being forwarded from [email protected] to [email protected]). Doing this successfully delivered all invites, cancellations, and meeting updates from iCal!
From what I can tell there must be something going on (probably my own fault) when a calendar invite is sent from my Google Apps account, through our old Exchange system, and then back to our Google Account. My assumption is it has something to do with the fact that our MX records for domain.com currently point to our old exchange servers, and the MX records for gtest.domain.com point to the Google Apps servers. It may also have something to do with the SPF record which only allows emails from domain.com to be sent from our Exchange servers.
Those are just guesses though as I am not very knowledgeable in that area.
I hope this helps and I would love to hear about anyone else working on this issue.

Podcasts not being Removed from my Ipod

I have several old podcasts that I have deleted from my ITUNES that for some reason, are not being deleted from my ipod...? The podcasts are not showing up in my itunes, so not sure how to clear them out from my ipod?? Thanks in advance for your help.

The most likely culprit is a playlist that's getting synced to your iPod.
The big change in this area in 7.7 is that all podcasts, even ones in playlists, appear in the iPod's Podcasts section. Before 7.7 the only episodes that appeared in the Podcasts section were ones that you synced in the Podcasts tab.
The interesting thing is that this change affects only what shows up in the iPod's Podcasts section, it doesn't affect the files that are actually transferred to the iPod.
To check this, find one of the episodes with the play count >= 1 in your iTunes library. Right click (or control click) the episode, and in the contextual menu go to Show In Playlist. See what playlists appear in that list. (Show In Playlist is right under Add To Playlist. If I'm wrong, Show In Playlist won't be there at all.)

My deleted emails on iPhone 4s are not being deleted from server

I'm facing a problem with my iPhone 4s when deleting emails. Unfortunately, they are not being deleted from the server. I tried setting the account in pop and imap with settings to delete from server and trash ticked. Still they keep on appearing in Outlook which is a double work to do. Please advise.

I'm no expert by far, but have had issues with this before.
IMAP should allow your iPhone to remove messages from the server.
But have you made sure both the iPhone and Outlook are connecting via IMAP?
If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
If you delete a message from Outlook does it disappear on the iPhone?
Alternativly you may need to check the email server settings.
Who is your email provider?
They may be able to check if IMAP allows you to remove emails.

TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone. as well, I cannnot pull up any emails that I sent. They just disappear.

my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.

R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support

My notes are not being passed from one device to another

My notes are not being passed from my ipad to my ipad mini.

There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

"SUS Purchase Orders" are not being extracted from SRM to BW

I'm usign BW 7.0 with SRM 5.0 (EBP and SUS).
"SUS Purchase Orders" (BUS2230) are not being extracted from SRM to BW, only "Purchase Orders" (BUS2201). I'm using standard SRM extractor 0BBP_TD_PO.
Does anyone have experieced this? Is there any special configuration to extract "SUS Purchase Orders"?
Thanks in advance
Raphael Barboza

The only solution we were able to provide with the time constraint we had was to modify the standard extractor to consider the SUS PO code instead of the PO code.
Function module: BBP_BI_PO_EXTRACT
Replace line:
c_object_type TYPE bbp_object_type VALUE c_po, u201CBUS2201
With the line:
c_object_type TYPE bbp_object_type VALUE c_suspo, u201CBUS2230
It is not the most elegant solution, but it worked.
Hope it helps.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately. The incoming server details haven't changed; the Connection Doctor shows the accounts are connected; I've turned everything off including the modern. Have exhausted my limited knowledge. Anyone with something similar?

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Dc7700, window7, machine speaker not working. migrating from window xp to 7

dc7700, window7, machine speaker not working. migrating from window xp to 7

Hi:
Just download and install the latest Realtek HD audio driver from the Realtek site.
Accept the agreement. Download and install either the first or second driver on the list depending on whether you installed the 32 or 64 bit version of W7.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

IDVD error message when sharing from imovie

1. When "sharing" from imovie to idvd, error message appears reading: "unable to publish project due to error-41."
2. Successfully "shared" once, with the first clip upside down.
Thank you for your insights.

Hi
Most probably it's the Start-Up/Boot/Mac OS hard disk that has less than 5Gb free space.
To let iDVD run OK - This Start-up hard disk should have 25Gb or more due to that
Your Mac is running a sort of UNIX (Mac OS) and this makes Mac OS and iDVD to use
lot's of temp files - AND they can not be addressed to any other hard disk at all.
More RAM - will not help
External/Second hard disk will if You first formatte it as Mac OS Extended and
move material over to this (or use it as Start-up hard disk)
External Start-up hard disk must be FireWire - NO USB2 will do this.
Must be Mac OS Extended formatted
Western Digital - My Book Serie - Can't do this.
My Lacie - works gladly as secondary start-up hard disk.
Yours Bengt W

How to get best picture quality using iDVD to burn a movie from iMovie?

I would appreciate any guidance on options to choose and approaches such that I get the best picture quality when I view an iMovie product on a wide screen HD TV using a DVD burned with iDVD. Choose wide screen or standard format in iMovie? Best Performance or Prof. Quality in iDVD? ...

Good Morning,
My computer is using Snow Leopard 10.6.5 and has ilife 09 installed on an imac. I have been reading it is better to use imovie 06. When I tried to do a custom install from the 06 disk imovie and idvd were grayed out but had a checkmark. It would not let me deselect idvd. Not really knowing how to do this I quite the process. Can you or someone please advise me on how and what exactly to do in order to accomplish a custom install of imovie 06? Should I delete imovie 09 first? If so how is this accomplished. Perhaps it would be less complicated to purchase photo to movie? Really do not want to spend unless it is necessary since I only know a little about what I'm doing but enough to be dangerous to my computer
Thanks,
reverseimage

VOIP calls not being forwarded from GW to GK and visa versa

I have a VOIP network setup in place using 2691 routers. i have a siemens PBX connected to the 2691 routers using an E1 controller (running QSIG), my WAN interface between the two sides is an ATM interface. when i do a csim start from one router to the extension on the other side the call goes through and the phone rings. However, when i actually dial from one extension to the other, the call is not being forwarded. and what happens is that i hear the dial tone again on the phone im dialing from.
I have taken some debugs but still could pin point the problem, even though in the ccapi inout debug i found that when it tries to look for a node, it doesnt find it.
I have attached the configuration for both sides. Along with the debug from one of the sites.
There are a couple of GW's associated with the GK.
The ones im concerned about are Mussalla_GW & GK-HO.
Thank You in advance
Mouhannad

Try this:
dial-peer voice 2 pots
direct-inward-dial
Without this command the router will not collect the digits coming across the PRI.
Please rate helpful posts.

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

IDVD Sound Not Being Migrated From iMovie

Similar Messages

Maybe you are looking for