Ie8 causing intermittent issues on forms application

Version 10.1.2.3.0
Forms Builder 10.1.2.0.2
We are encountering intermittent issue on our forms application where if you click on a text field, the mouse cursor does not go there and if you click on certain tabs, nothing happens. We have also noticed issues where if you click on menu items, then there is a 4-5 seconds delay in response.
Using Jave Runtime 6 update 15.
Has anyone encountered the same issue.
I have checked the Oracle page below and it says thay IE 7 is supported.
http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html
Also looked on metalink and it says that IE8 is
recommended Browsers for Oracle E-Business Suite 11i, but we are 10G.
Has anyone found the cause or solution?
Thanks
Found another article
http://blogs.oracle.com/stevenChan/2009/09/internet_explorer_8_certified_ebs12.html
Edited by: Forms_Reports_Beginner on Oct 22, 2009 1:59 PM

Satya,
With web deployed Forms, any call to the database is going to cause your form to run slower due to the time it takes to send and receive data from the database. Web deployed Forms require you to change the way you develop a Form in order to reduce the number of calls to the database. Excessive COMMITs in a Form could certainly cause your Form to run slower.
If your Form is issues a FORMS_DDL('COMMIT') call right after a Do_Key('COMMIT_FORM') then this is redundant is not necessary. If you look at the definition of the Forms_DDL built-in you'll find that the purpose of this built-in is to issue dynamic SQL statements during run-time and the built-in issues an implicit COMMIT at the end of the transaction. This implicit COMMIT is independent of the Forms transaction so any pending changes in the Form are not affected by the implicit COMMIT. Whereas, the call to COMMIT_FORM causes your Form to update data in the database to match your Form changes. Not only does COMMIT_FORM commit your Forms changes, but it also commits any pending database changes your Forms session may have created.
I recommend you look through your Form and remove any redundant COMMIT calls. Also, look at your Post-Query triggers and try to reduce or remove any database calls you have there as well.
Hope this helps.
Craig...
If a response is helpful or correct, please mark it accordingly

Similar Messages

Issues with accessing forms applications behind a firewall & caching proxy

We have web enabled an forms application and has the following set-up at server end.
Machine no 1. Oracle Forms Server 6i with patch level 1 listening on HTTP/Port 80 on a windows NT box.
Machine no 2. Apache Webserver. listening on HTTP/Port 80
Both the machines are behind a firewall which allows only HTTP on port 80.
At clients end we have
1. a firewall which allows only HTTP on port 80.
2. a caching proxy server
The client machine connects through the caching proxy server.
When the client connects the applet gets downloaded and initialised, the form server log shows the following
-Forms Server Log-----
[09/27/00 15:01:09 India Standard Time]::LISTN: Connection Request [ConnId=13, Addr=194.120.163.251:16278]
[09/27/00 15:01:09 India Standard Time]::RUNFORM Client Connected [ConnId=13, PID=188]
at the same time at the client side we get a FRM-92050 error: Failed to connect to server fs.formserver.com:80
Please help
Thanks
null

Thanks Henrique.
This is not very promising but it confirms there is a potential issue
How did you manage to solve the problem, allowing the NW server/application to perform direct accesses?
Adalbert

Error message is not telling which field causing the issue!

Hello
I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
The Entered Value Is Not on the List of Valid Values. (I am guessing this error is talking about the DROPDOWN fields only)
I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
How can i trace and how can i fix it, pls. let me know
Thank you

Thank you for your tips.
But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
or is it Adobe's/Form's error?
Thank you

Insufficient permissions for performing this operation through Windows Form application.

When accessing a report through the browser the user can view the report, however, have a report viewer in a Windows Form application get the below error when loading the report:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Web.Services.Protocols.SoapException: The permissions granted to user
'domain\username'
are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'domain\username' are insufficient for performing this operation.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at ReportServer.ReportService.ReportingService2010.GetReportServerConfigInfo(Boolean ScaleOut)
   at ReportServer.ReportItems.GetReportServerName()
   at Evolution2Application.FormMain.treeViewEvolutionReports_AfterSelect(Object sender, TreeViewEventArgs e)
   at System.Windows.Forms.TreeView.OnAfterSelect(TreeViewEventArgs e)
   at System.Windows.Forms.TreeView.TvnSelected(NMTREEVIEW* nmtv)
   at System.Windows.Forms.TreeView.WmNotify(Message& m)
   at System.Windows.Forms.TreeView.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
C# code I use to connect to the reporting service
ReportingService2010
rs =newReportingService2010();
rs.Credentials
=System.Net.CredentialCache.DefaultCredentials;
rs.Url
=http://sqlserver01/reportserver/reportservice2010.asmx;
Can someone explain what I need to do to prevent getting this error, the user has ContentManager rights on the server through a security group.

found the issue rs.GetConfigInfo(false) was causing the error, now removed this.

Forms Application(custom built) freezes at random. Urgent!!

Hi
We have a forms application built in 6i and deployed on 9i Rel1 application server.
Database is Oracle 9i Rel2.
The forms application freezes at random with no errors.
The jinitiator version is 1.1.8.19.
The forms has scroll bars and most of them are tabbed canvas on plain canvas.
Any suggestion will be greately appriciated. Please help.
Thanks you.

It is very difficult to say why you are experiencing a performance issue. I do recall that one of the JInitiator versions did have a problem which caused some minor performance issues. If you are not using version 1.3.1.30 (the last version created) I would recommend using it. Also, here are some things to consider,
1. If the client machines are old and outdated, you likely will experience performance problems as the products you run on it are replaced with newer ones. For example, if you were previously running JInit 1.1.8 on an under powered WinXP, NT or older machine and are now running Jinit 1.3.1.x, I would expect poor performance.
2. The form will be slow to start the first time you run it with the new JRE (JInit). This is because the jar file(s) as well as other files must be downloaded and cached. After this occurs, future attempts should startup somewhat quicker.
3. If the first form/canvas that is presented to the end-user in your application contains a large number of gui objects (text boxes, buttons, etc), this will delay startup. Creating a splash or welcome screen which contains a very limited number of objects can help to increase startup performance or at least the perception.
4. On the server (mid tier), do not access application files across network shares. For example if "Forms" is running on a machine called "myMachine" all of the Forms modules (fmx, mmx, plx) files should be on the same machine, "myMachine". Accessing these files remotely will degrade performance.
5. In all cases, having sufficient RAM on the client and server are an important factor to ensuring the best possible performance. Of course a fast CPU is always helpful too, but generally most machine are short of memory and not CPU.

Intermittent Issue in ALUI 6.5

I am facing an intermittent issue while retrieving Adaptivepagelayouts from the imageserver. I have two different layouts. One is applied on the unauthenticated part and the other one is applied to authenticated part on the same site. While navigating from the unauthenticated part to authenticated part, the new page layout is picked and rendered as per defined in experience rules. Here the issue is that sometimes the page layout for the authenticated side fails to be picked and the authenticated side comes up with the Adaptive pagelayout meant for the unauthenticated part. This distorts the whole design of the page. I am not sure of what could be the exact reason for this, as 50% times it works fine and 50% times it goes wrong. Moreover the ALUI admin and the image server is continuously being worked upon by other developers, so not sure if that might have caused the issue...but then why this intermittent thing. Moreover, imageserver and ALUI is placed on two different servers.
Kindly help me out as I am new to portal. Thanks for all your help in advance :)
PTSpy logs says :
152 3-7-2012 7:46:50.390 Error Portal_UI_Infrastructure portal.SERVERNAME.UserName .NET #7 com.plumtree.portaluiinfrastructure.layout.impl.LayoutManager LayoutManager:GetLayout Could not begin processing web service with Id: 491
com.plumtree.server.marshalers.PTException: -2147203531 - Layout with web service ID: 491 returned error code: -2147203531 and error message: Portlet request failed, the remote server returned HTTP error '400'. Web Service ID=491, User ID=126781, URL='http://hostname/plumtree/portal/private/pagelayouts/XXXX/BasePageLayout/authenticated.html'
com.plumtree.server.marshalers.PTException: -2147203531 - Layout with web service ID: 491 returned error code: -2147203531 and error message: Portlet request failed, the remote server returned HTTP error '400'. Web Service ID=491, User ID=126781, URL='http://hostname/imageserver/plumtree/portal/private/pagelayouts/XXXX/BasePageLayout/authenticated.html' at com.plumtree.portaluiinfrastructure.layout.impl.LayoutManager.GetLayout(Int32 nWebServiceId, AActivitySpace asSpace) in e:\buildroot\Release\portalui\6.5.x\ptwebui\portaluiinfrastructure\dotnet\prod\src\com\plumtree\portaluiinfrastructure\layout\impl\LayoutManager.cs:line 82
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(Int32 nWebServiceID, Boolean bMainPage)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(Layouts layout)
at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(IWebData pageData)
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.5.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1817
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.5.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 539
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.5.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 163
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\6.5.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 81
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.5.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 36
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) <ptLogMsgEnd>

I would suggest you post your question on the WebCenter Interaction forum.
WebCenter - Interaction
Brad

Multi-form applications

I have a created a multi-form application where i have a calling form which calls another form. The user could commit changes in the called form and return to the calling form and either have changes in that form committed or rolled back. However, a commit in the called form SHOULD NOT commit any changes in the calling form. All this works fine.
I have implemented this using "autonomous transaction". I am using the call_form --> open_form sequence for this purpose. i.e there is a call to a dummy form using call_form and this dummy form calls the other form using open_form call. Now, the problem that i have is that, at times the called form gets hidden behind the calling form and what is visible to the user is the calling form - with no access to any items on the form as this form is now NOT the active form in the application. This problem, though not reproducible has occurred many times. I do not have a solution to this. Any suggestions/pointers/soultions most welcome.
Thanks in advance..

What are OPEN_FORM,CALL_FORM,NEW_FORM? diff?
CALL_FORM : It calls the other form. but parent remains active, when called form completes the operation , it releases lock and control goes back to the calling form.
When you call a form, Oracle Forms issues a savepoint for the called form. If the CLEAR_FORM function causes a rollback when the called form is current, Oracle Forms rolls back uncommitted changes to this savepoint.
OPEN_FORM : When you call a form, Oracle Forms issues a savepoint for the called form. If the CLEAR_FORM function causes a rollback when the called form is current, Oracle Forms rolls back uncommitted changes to this savepoint.
NEW_FORM : Exits the current form and enters the indicated form. The calling form is terminated as the parent form. If the calling form had been called by a higher form, Oracle Forms keeps the higher call active and treats it as a call to the new form. Oracle Forms releases memory (such as database cursors) that the terminated form was using.
Oracle Forms runs the new form with the same Runform options as the parent form. If the parent form was a called form, Oracle Forms runs the new form with the same options as the parent form.
Call_form.
BEGIN
CALL_FORM('FORM2',
NO_HIDE,
DO_REPLACE, -- replace menu
NO_QUERY_ONLY,
SHARE_LIBRARY_DATA);
END;
Syntax
OPEN_FORM(form_name);
OPEN_FORM(form_name,activate_mode);
OPEN_FORM(form_name,activate_mode,session_mode);
OPEN_FORM(form_name,activate_mode,session_mode,
paramlist_name);
OPEN_FORM(form_name,activate_mode,session_mode,
paramlist_id);
sarah

How to set up database for form application in app. server 10g r2

Hi Friends and Bgrant.
I get user compiled fmb file.
I did not find componant in app. server.
However, I can see form server ment with 3 subitem : form compiler, formmigration and run form on the web.
The form application is supported by database. Other person already configured server for application .
I put a URL in URL field in run form on the web. I can see install ed successfully! Oracle application Server. Forme server. Oracle application server 10g. title: welcome oracle application server
after clicked OK button, the page is grey blank without any inforamtion to be displayed. No error message. status bottome as done. the page title as Oracle application server form server.
SO I think that i need to creade a datasource in app. server.
But I do not know how to fill field.
I can log into database from SQL*plus in server PC.
In datasource page in app. server: i copy a default ORCALEDS information
with new ID and password. it does not work
hereData Source Class:
JDBC URL :
JDBC Driver:
Location
Transactional(XA) Location
EJB Location
Thanks for any help!!
jim

Thanks for help!
I fixed issue of database connection with new issue.
Only display first form setting (first URL) for 4 different URL
URL:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=xxxx
net 3 form setting
However it only display one form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do?
I am waiting for your help!
JIm
Edited by: user589812 on Nov 24, 2008 1:49 PM

CRM 7.0 Unable to open/view PDF Attachments in Email (Intermittent issue)

Hi,
Unable to open an attachment (PDF format) sent from exchange server(Lotus) to SAP CRM,Actually its an intermittent issue When i try to open email in UI ,getting an error message "File is damaged and couldnot be repaired".
I understand that PDF attachment wasn't delivered(Synchronization issue between Lotus and CRM) to SAP CRM system properly by the exchange server ( Lotus ).Hence the particular attachments are not able to view/open in SAP CRM system.
Is there anyway to trace and find out root cause of the issue?
Regards,
Shan

Issue with IE version and some PDF wasn't delivered properly by lotus exchange server

WUO-709: Unable to get Property: Open == Forms application using Webutil

Hi everyone,
I have configured Webutil and tested a demo application for loading excel data into a forms application. The application works just fine. Here is the code:
DECLARE
application Client_OLE2.Obj_Type;
workbooks Client_OLE2.Obj_Type;
workbook Client_OLE2.Obj_Type;
worksheets Client_OLE2.Obj_Type;
worksheet Client_OLE2.Obj_Type;
filename                varchar2(2000);
cell Client_OLE2.OBJ_TYPE;
args Client_OLE2.OBJ_TYPE;
cell_value varchar2(100);
eod boolean:=false;
j integer:=1;
BEGIN
     -- The following set up communication with the excel spreadsheet
application := Client_OLE2.create_obj('Excel.Application');
Client_OLE2.set_property(application,'Visible','false');
workbooks := Client_OLE2.Get_Obj_Property(application, 'Workbooks');
args := Client_OLE2.CREATE_ARGLIST;
Client_OLE2.add_arg(args, 'c:\test\test.xls');
workbook := Client_OLE2.GET_OBJ_PROPERTY(workbooks,'Open',args);
Client_OLE2.destroy_arglist(args);
worksheets := Client_OLE2.GET_OBJ_PROPERTY(workbook, 'Worksheets');
worksheet := Client_OLE2.GET_OBJ_PROPERTY(application,'activesheet');
--Go to the first record
go_block('planets');
first_record;
loop
          If :system.record_status <> 'NEW' then
create_record;
          end if;
exit when eod;
     for k in 1..3 loop --3 fields per record
     args:= Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:= Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
cell_value :=Client_OLE2.get_char_property(cell, 'Value');
if upper(cell_value) = 'EOD' then
     eod:=true;
     Message('End of Data');
     exit;
end if;
--Could be done this way also ->
/*if k =1 then
     :dept.deptno:=cell_value;
end if;
if k =2 then
     :dept.dname:=cell_value;
end if;
if k =3 then
     :dept.loc:=cell_value;
end if;
--Less code this way ->
copy(cell_value,name_in('system.cursor_item'));
next_item;
     end loop; --for
     j:=j+1;
end loop;--main loop
-- Release the Client_OLE2 object handles
Client_OLE2.release_obj(cell);
Client_OLE2.release_obj(worksheet);
Client_OLE2.release_obj(worksheets);
Client_OLE2.release_obj(workbook);
Client_OLE2.release_obj(workbooks);
Client_OLE2.invoke(application,'Quit');
Client_OLE2.release_obj(application);
END;
-- cell_value :=Client_OLE2.get_num_property(cell, 'Value');
The issue comes when I try to supply filename and path (here, c:\test\test.xls) through a file open dialog. I tried each of these:
1.
filename := client_get_file_name
(directory_name => 'C:\'
,file_name => 'test'|| '.xls'
,file_filter => 'Excel (*.xls)|*.xls|'
,message => 'Select client side filename where App Server file will be saved'
,dialog_type => OPEN_FILE
,select_file => TRUE
2.
filename := Client_Get_File_Name(directory_name => 'C:\'
,file_name => null
,file_filter => null
,message => null
,dialog_type => null
,select_file => null
3.
filename := client_get_file_name ('','','','Select a file to Upload ',null,TRUE);
On using the above, I DO get a file open box. However, after browsing and selecting a file, I am getting the error message:
WUO-709 [OleFunctions.get_obj_property_args()] Unable to get Property: Open; Exception com.jacob.com.ComFailException: Can't map name to dispid: Open
I have checked the documentation on 'WUO-709' but cannot seem to figure out why it's not working.
Sorry for the lengthy description. Would greatly appreciate help on this.
- Amit

I forgot to mention that in the modified code, I am supplying 'filename' as:
filename := client_get_file_name ('','','','Select a file to Upload ',null,TRUE);
args := Client_OLE2.CREATE_ARGLIST;
Client_OLE2.add_arg(args, filename);
Thanks,
Amit

Forms application returns "ORA-01403 no data found" exception on Windows 7

Hi everyone,
I am currently involved in an application compatibility project for an O/S migration from Windows XP to Windows 7.
We have a legacy Oracle Dev6i P18 Forms application that has been working perfectly on Windows XP for the last decade or so. When we installed the same application on Windows 7, it returned a pop-up error message with the text: "ORA-01403 no data found" when performing a certain operation (clicking on a Submit button in a specific form). The same operation works successfully on Windows XP displaying the message "Submit has been successful".
This error is well documented and the solution involves adding an exception handler to the faulting SQL statement(s) in order to handle the ORA-01403 exception. Unfortunately, the application is composed of compiled forms (.FMX) and we no longer have the source code so I can't implement this solution.
I ran a file comparison utility (WinDiff from the Windows SDK) and confirmed that all the files in the application folder and the Oracle Dev6i P18 folder are identical on both the Windows XP and Windows 7 systems.
I enabled tracing in SQLNet.ORA by configuring TRACE_LEVEL_CLIENT=SUPPORT (I know, too verbose) and other related settings on both systems and have uploaded the traces to my SkyDrive for public viewing:
http://sdrv.ms/10BNYtI
The traces show that the "ORA-01403" exception occurs many times on both Windows XP and Windows 7 systems as a result of various SQL statements being executed, for instance:
SELECT TASK_ID,TASK_DETAIL_STATUS,ASSIGNED_DATE FROM TASK_DETAILS WHERE TASK_ID = :b1 AND TASK_DETAIL_STATUS = (SELECT ID FROM V_TASK_STATUS WHERE ABBREVIATION = 'PLANNED' ) FOR UPDATE OF TASK_DETAIL_STATUS,ASSIGNED_DATE
UPDATE TASK_DETAILS SET ASSIGNED_DATE=NTMS_UTIL.GET_SERVER_DATE,TASK_DETAIL_STATUS=(SELECT ID FROM V_TASK_STATUS WHERE ABBREVIATION = 'ASSIGNED' ) WHERE ROWID = :b1
ORA-01403: no data found.
So the same error happens on both Windows XP and Windows 7.
On Windows XP, the error is somehow handled, and does not cause the "Submit" operation to fail.
On Windows 7, however, the error bubbles to the surface and is displayed to the user, thus halting the "Submit" operation.

Thank you. I'm well aware that adding an exception handler is the classic solution to the ORA-01403 error. However, like I mentioned in my original post, I don't have the source code. All I have are the compiled .FMX forms so I can't implement such a solution:
From my original post:
This error is well documented and the solution involves adding an exception handler to the faulting SQL statement(s) in order to handle the ORA-01403 exception. Unfortunately, the application is composed of compiled forms (.FMX) and we no longer have the source code so I can't implement this solution.

Issue is TEXT_IO application API is not working in report builder 10g.

Issue is TEXT_IO application API is not working in report builder 10g.
TEXT_IO application api is working in report builder 6i. (Not working in upgrade from Oracle EBiz 11i to Oracle Ebiz R12)
I saw that details in some forums, client_text_io is available for form builder 10g.
Is any other api available for report builder 10g?
If it is available what steps we need to do?

All the CLIENT_% procedures are part of webutil in Forms. Forms uses the Java applet on the client PC to perform actions on the local PC via webutil. This is not possible for Reports.
You can still use text_io on the server, but you need some other way to copy the files to/from the client PC.
I wonder how you used the functionality in EBS R11. Even R11 uses web reports, so text_io already worked on the server, not the client PC.

Help with httpd.conf redirect to our Forms Application

Hello. We are running Oracle Application Server 10g Release 2 (10.1.2) Forms & Reports services on a Windows 2003 x64 server. I'm having a difficult time trying to get the default Oracle iAS homepage to redirect to our forms application installed on the same server. For example, we access our server homepage at http://db1. We access our forms app at http://db1/forms/frmservlet?form=C:\forms\execs\app.fmx. In httpd.conf I've tried the following:
1. Redirect / http://db1/forms/frmservlet?form=C:\forms\execs\app.fmx
When accessing http://db1, the following error is returned:
FRM-92130: Registry is either missing, or contains invalid, entry for Dispatcher...
The error returned in Internet Explorer 7 is:
java.lang.ClassFormatError: oracle/forms/engine/Main (Bad magic number)
This also breaks the form URL.
2. I also tried this at the end of httpd.conf:
RewriteEngine On
RewriteRule ^/(.*)$ http://db1/forms/frmservlet?form=C:\forms\execs\app.fmx
When accessing http://db1, the server appears to be stuck in a loop. I think the problem is that the redirect is happening on all occurrences that contain "db1". So then a user enters http://db1, the redirection happens. But after the redirection, the new URL contains "db1" and the redirection happens again and keeps looping.
Any help resolving this issue is greatly appreciated.
-Al

Summary:
I fixed the "Bad magic number" error by modifying the client's JInitiator configuration to not use Browser Settings for Proxies.
Issue:
JInitiator running in Internet Explorer displays the following error: "java.lang.ClassFormatError: oracle/forms/engine/Main (Bad magic number)”
Details:
In my case, only external users connecting via a Proxy Server were having this issue.
Solution:
• Open "JInitiator Control Panel":
Start --> Settings --> Control Panel --> JInitiator 1.3.1.22
• Open [Proxies] tab; Uncheck the “Use Browser Settings” checkbox.

My macbook pro keeps freezing and shutting off when I am browsing the web on Safari. How can I figure out what is causing this issue?

For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

ADF popup is not showing - Intermittent issue

Guys,
Once in a while popups inside the adf application are not showing up. have anybody faced this issue?
Though its rare, i would like to know the reasons behind this intermittent issue.
Any pointers/thoughts will be appreciated... Thanks

Popup if very problematic item in ADF.
There are 2 ways to invoke the popup correctly
1. Make sure that you don't have a combination of viewScope and backingbean scope in everything related to your popup
2. Or (and this is the best one) - don't use popup. Create a bounded task flow and call it from your task flow. You have an option to call it as inline popup.

Ie8 causing intermittent issues on forms application

Similar Messages

Maybe you are looking for