IEMON -- error in analyze_iemon prog.

Hi,
I am trying to use web query analysis tool and when i am trying produce the .csv file in cmd prompt it is giving me following error message:
"analyze_iemon" is not recognized as an internal or external cmd, operable program or batch file
the strange thig is it is creating .csv file but its empty !!!
can someone guide me in this ??
i will surely give the points.
Thank You in advance.
KS

Doodle,
my id is [email protected]
Thank you for your respond.
Waiting for your email.
I will surely come back and will give u points.
KS

Similar Messages

  • Free trial on Win XP error message when prog opens

    I installed soundbooth cs5 trial (3x already), on windows xp all updated. When I start the prog. from all programs, the sounbooth starts but immediately get an "error" message:
    The instruction at 0x28c2d033 reference memory ay 0xffffffff. The memory could not be "read"
    Click on OK to terminate the prog or
    Click on Cancel to debug the program
    So any of the above options close the program. It does not work!
    Any solutions for that?
    Thank you

    Hi Leigh
    Try downloading the software from here. https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    You should not have an issue with that link
    Thanks
    Scott

  • Runtime Error (Std SAP Prog): ITAB_ILLEGAL_REG

    Hi,
    Run-time error occurred in SAP and the error description says 'ITAB_ILLEGAL_REG' (This is std sap program which was called to generate some FORMS in sap <<No custom code added, so pls don't advise to correct the field assignments, loop, field symbols etc >>).
    Short dump ITAB_ILLEGAL_REG occurs when the device id is still not generated.
    For reference, I have checked the sap note: 938512, but this is for version 700 SAP_BASIS & 700 SAP_ABA.
    We are into 731 SAP_BASIS & 731 SAP_ABA.
    Could you kindly suggest if there is any SAP Note available to fix this issue for the version that I have mentioned.
    I have searched in SDN and other related sites, but couldn't get a fix.
    Thanks,
    Josh

    Hello Josh,
    This exception occurs from the statement LOOP AT itab refer to the SAP help link below.
    http://help.sap.com/abapdocu_702/en/abaploop_at_itab.htm
    check the place where this exception occurs, it might be in the enhancement in your standard program.
    If it is not there in enhancement and in standard, then raise a support message to SAP as Matthew suggested.
    Regards,
    TP

  • St22- error- ITAB_DUPLICATE_KEY  for prog - SBIE0001

    Hi All,
    could any one help me to resolve this below issue.
    In sm37 m getting a one job canceled due to ITAB_DUPLICATE_KEY  on production system. and it triggering to the below piece of code
    IF orgunits-plvar = last_plvar.
             MOVE-CORRESPONDING orgunits TO in_objects.
             APPEND in_objects.
           ENDIF.
           IF ( orgunits-plvar <> last_plvar ) OR ( sy-tabix = n_of_lines ).
             REFRESH main_co.
             CALL FUNCTION 'RH_GET_COSTCENTER_OF_OBJECT'
                EXPORTING
                    plvar              = last_plvar
                    begda              = p_begda
                    endda              = p_endda
    *            svect             = '1'
    *            active            = ' '
    *            dist               = ' '
                    object_only        = only_direct
                    buffered_access    = 'X'
                    read_it0001        = 'X'
                    i0027_flag         = ' '
                    ombuffer_mode      = ' '
                TABLES
                    in_objects         = in_objects
                    main_costcenters   = main_co
                EXCEPTIONS
                    OTHERS             = 0.
        ERROR>>>>>>>     INSERT LINES OF main_co INTO TABLE main_costcenters.    <<<<<<<<< ERROR
    How to resove this is there any sap note for this ?
    Regards,
    Sunil

    Job log overview for job:    BIREQU_DHKDP5CSETG1AHB7JXOB7CD2S / 00050100
    Date       Time     Message text                                                                  Message class Message no. Message type
    05.05.2014 00:05:04 Job started                                                                        00           516          S
    05.05.2014 00:05:04 Step 001 started (program SBIE0001, variant &0000000308035, user ID BWREMOTE)      00           550          S
    05.05.2014 00:05:04 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)           R3           413          S
    05.05.2014 00:05:04 DATASOURCE = 0ORGUNIT_ATTR                                                         R3           299          S
    05.05.2014 00:05:04 RLOGSYS    = BIPCLNT900                                                            R3           299          S
    05.05.2014 00:05:04 REQUNR     = REQU_DHKDP5CSETG1AHB7JXOB7CD2S                                        R3           299          S
    05.05.2014 00:05:04 UPDMODE    = F                                                                     R3           299          S
    05.05.2014 00:05:04 LANGUAGES  = *                                                                     R3           299          S
    05.05.2014 00:05:04 *************************************************************************          R8           048          S
    05.05.2014 00:05:04 *          Current Values for Selected Profile Parameters               *          R8           049          S
    05.05.2014 00:05:04 *************************************************************************          R8           048          S
    05.05.2014 00:05:04 * abap/heap_area_nondia......... 0                                       *         R8           050          S
    05.05.2014 00:05:04 * abap/heap_area_total.......... 34358689792                             *         R8           050          S
    05.05.2014 00:05:04 * abap/heaplimit................ 40000000                                *         R8           050          S
    05.05.2014 00:05:04 * zcsa/installed_languages...... DE                                      *         R8           050          S
    05.05.2014 00:05:04 * zcsa/system_language.......... E                                       *         R8           050          S
    05.05.2014 00:05:04 * ztta/max_memreq_MB............ 2047                                    *         R8           050          S
    05.05.2014 00:05:04 * ztta/roll_area................ 6500000                                 *         R8           050          S
    05.05.2014 00:05:04 * ztta/roll_extension........... 2000000000                              *         R8           050          S
    05.05.2014 00:05:04 *************************************************************************          R8           048          S
    05.05.2014 00:05:10 Internal session terminated with a runtime error (see ST22)                        00           671          A
    05.05.2014 00:05:10 Job cancelled                                                                      00           518          A

  • Web query analysis: analyze_iemon error..

    Hi,
    I am trying to use web query analysis tool and when i am trying produce the .csv file in cmd prompt it is giving me following error message:
    "analyze_iemon" is not recognized as an internal or external cmd, operable program or batch file
    the strange thig is it is creating .csv file but its empty !!!
    can someone guide me in this ??
    i will surely give the points.
    Thank You in advance.
    KS

    Doodle,
    my id is [email protected]
    Thank you for your respond.
    Waiting for your email.
    I will surely come back and will give u points.
    KS

  • Mprotect failed: Resource temporarily unavailable error while starting JVM

    Hi All,
    I am using JDK 1.6.0_21 in sunos on sparc server.
    JDK_
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
    Java HotSpot(TM) Server VM (build 17.0-b17, mixed mode)
    OS and Hardware config_
    SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,SPARC-Enterprise.
    while starting the JVM getting the mprotect error as shown below:
    *# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
    *# An error report file with more information is saved as:*
    *# /progs/spider/runtime/testtool/hs_err_pid11769.log*
    *# If you would like to submit a bug report, please visit:*
    *# http://java.sun.com/webapps/bugreport/crash.jsp*
    *11769 Abort - core dumped*
    dl failure on line 685Error: failed /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so, because ld.so.1: java: fatal: /usr/jdk/instanes/jdk1.6.0/jre/lib/sparc/server/libjvm.so: mprotect failed: Resource temporarily unavailable
    Complete error written to */progs/spider/runtime/testtool/hs_err_pid11769.log*.
    *# A fatal error has been detected by the Java Runtime Environment:*
    *# SIGSEGV (0xb) at pc=0xfe56af10, pid=11769, tid=5*
    *# JRE version: 6.0_35-b10*
    *# Java VM: Java HotSpot(TM) Server VM (20.10-b01 mixed mode solaris-sparc )*
    *# Problematic frame:*
    *# V [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
    *# If you would like to submit a bug report, please visit:*
    *# http://java.sun.com/webapps/bugreport/crash.jsp*
    ---------------  T H R E A D  ---------------
    *Current thread (0x000e1400):  VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0xf24ff724
    Registers:
    G1=0x000504b8 G2=0xfc004fc0 G3=0xfc00d6ac G4=0xfc031fc0
    G5=0x0002d000 G6=0x00000000 G7=0xfe3c1a00 Y=0x00000000
    O0=0xd757f5f0 O1=0xf24ff720 O2=0xfee237bc O3=0x0000ffff
    O4=0x0000fc00 O5=0xfc004f88 O6=0xd757f4b8 O7=0xfe8b978c
    L0=0x00041400 L1=0xfee375e8 L2=0x04000000 L3=0x00041400
    L4=0x000415f0 L5=0x00041400 L6=0x000415e8 L7=0x01000000
    I0=0xd757f5f0 I1=0xfee2fa94 I2=0xfedf6000 I3=0x00039a94
    I4=0x0053c690 I5=0xf24ff720 I6=0xd757f518 I7=0xfe5d6b58
    PC=0xfe56af10 nPC=0xfe56af14
    Top of Stack: (sp=0xd757f4b8)
    *0xd757f4b8: 00041400 fee375e8 04000000 00041400*
    *0xd757f4c8: 000415f0 00041400 000415e8 01000000*
    *0xd757f4d8: d757f5f0 fee2fa94 fedf6000 00039a94*
    *0xd757f4e8: 0053c690 f24ff720 d757f518 fe5d6b58*
    *0xd757f4f8: 00000000 00000000 f1b78050 00000003*
    *0xd757f508: 000d0374 fffffffd 00000000 000ad1f8*
    *0xd757f518: 00000000 fc004f88 fc00d6ac f24ff720*
    *0xd757f528: 00000000 00704518 00000003 d757f830*
    Instructions: (pc=0xfe56af10)
    *0xfe56aef0: e6 26 24 50 81 c7 e0 08 81 e8 20 00 9d e3 bf a0*
    *0xfe56af00: fa 06 20 00 19 00 00 3f 90 10 00 18 96 03 23 ff*
    *0xfe56af10: f2 07 60 04 9f 3e 60 00 94 22 c0 0f b9 33 f0 3f*
    *0xfe56af20: b7 32 b0 3f b0 1f 20 01 b4 1e e0 01 ae 0e 00 1a*
    Register to memory mapping:
    G1=0x000504b8 is an unknown value
    G2=0xfc004fc0 is pointing into interpreter code (not bytecode specific)
    G3=0xfc00d6ac is an Interpreter codelet
    method entry point (kind = native)  [0xfc00d560, 0xfc00d8e0]  896 bytes
    G4=0xfc031fc0 is an unknown value
    G5=0x0002d000 is an unknown value
    G6=0x00000000 is an unknown value
    G7=0xfe3c1a00 is an unknown value
    O0=0xd757f5f0 is an unknown value
    O1=0xf24ff720 is an unallocated location in the heap
    O2=0xfee237bc: +0x2cc3c in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
    O3=0x0000ffff is an unknown value
    O4=0x0000fc00 is an unknown value
    *O5=0xfc004f88 [CodeBlob (0xfc004f88)]*
    Framesize: 0
    BufferBlob (0xfc004f88) used for Interpreter
    O6=0xd757f4b8 is an unknown value
    O7=0xfe8b978c: AsyncGetCallTrace+0x96fc in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
    L0=0x00041400 is an unknown value
    L1=0xfee375e8: +0x40a68 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
    L2=0x04000000 is an unknown value
    L3=0x00041400 is an unknown value
    L4=0x000415f0 is an unknown value
    L5=0x00041400 is an unknown value
    L6=0x000415e8 is an unknown value
    L7=0x01000000 is an unknown value
    I0=0xd757f5f0 is an unknown value
    I1=0xfee2fa94: +0x38f14 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
    *I2=0xfedf6000: GLOBALOFFSET_TABLE_+0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000*
    I3=0x00039a94 is an unknown value
    I4=0x0053c690 is an unknown value
    I5=0xf24ff720 is an unallocated location in the heap
    I6=0xd757f518 is an unknown value
    I7=0xfe5d6b58: JVM_GetClassLoader+0x3ec0 in /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so at 0xfe400000
    Stack: [0xd7500000,0xd7580000],  sp=0xd757f4b8,  free space=509k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    *V  [libjvm.so+0x16af10] int frame::interpreter_frame_bci()const+0x14*
    *V  [libjvm.so+0x1d6b60] void frame::gc_prologue()+0x20*
    *V  [libjvm.so+0x2241e4] void Threads::gc_prologue()+0xd0*
    *V  [libjvm.so+0x7c62c8] void PSMarkSweep::invoke_no_policy(bool)+0x52c*
    *V  [libjvm.so+0x7c5d78] void PSMarkSweep::invoke(bool)+0x8c*
    *V  [libjvm.so+0x225264] void VM_ParallelGCSystemGC::doit()+0xc4*
    *V  [libjvm.so+0x1f0018] void VM_Operation::evaluate()+0x88*
    *V  [libjvm.so+0x8ce23c] void VMThread::evaluate_operation(VM_Operation*)+0xd4*
    *V  [libjvm.so+0x8ce784] void VMThread::loop()+0x414*
    *V  [libjvm.so+0x267010] void VMThread::run()+0xa0*
    *V  [libjvm.so+0x791a18] java_start+0x158*
    VM_Operation (0xf24ff5b0):
    *[error occurred during error reporting (printing VM operation), id 0xb]*
    ---------------  P R O C E S S  ---------------
    Java Threads: ( => current thread )
    *0x00704400 JavaThread "GC Daemon" daemon [_thread_blocked, id=20, stack(0xf2480000,0xf2500000)]*
    *0x00716400 JavaThread "RMI Reaper" [_thread_blocked, id=19, stack(0xf2580000,0xf2600000)]*
    *0x0070fc00 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=18, stack(0xf2680000,0xf2700000)]*
    *0x00100800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=11, stack(0xd6f00000,0xd6f80000)]*
    *0x000fe000 JavaThread "C2 CompilerThread1" daemon [_thread_blocked, id=10, stack(0xd7000000,0xd7080000)]*
    *0x000fb800 JavaThread "C2 CompilerThread0" daemon [_thread_blocked, id=9, stack(0xd7100000,0xd7180000)]*
    *0x000fa000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=8, stack(0xd7200000,0xd7280000)]*
    *0x000e6c00 JavaThread "Finalizer" daemon [_thread_blocked, id=7, stack(0xd7300000,0xd7380000)]*
    *0x000e5400 JavaThread "Reference Handler" daemon [_thread_blocked, id=6, stack(0xd7400000,0xd7480000)]*
    *0x00032000 JavaThread "main" [_thread_blocked, id=2, stack(0xfe300000,0xfe380000)]*
    Other Threads:
    *=>0x000e1400 VMThread [stack: 0xd7500000,0xd7580000] [id=5]*
    *0x00113400 WatcherThread [stack: 0xd6e00000,0xd6e80000] [id=12]*
    VM state:at safepoint (normal execution)
    *VM Mutex/Monitor currently owned by a thread:  ([mutex/lock_event])*
    *[0x00031330] Threads_lock - owner thread: 0x000e1400*
    *[0x00031740] Heap_lock - owner thread: 0x00704400*
    Heap
    PSYoungGen      total 10752K, used 1008K [0xf1000000, 0xf1c00000, 0xfbc00000)
    eden space 9216K, 0% used [0xf1000000,0xf1000000,0xf1900000)
    from space 1536K, 65% used [0xf1a80000,0xf1b7c050,0xf1c00000)
    to   space 1536K, 0% used [0xf1900000,0xf1900000,0xf1a80000)
    PSOldGen        total 24576K, used 0K [0xdb800000, 0xdd000000, 0xf1000000)
    object space 24576K, 0% used [0xdb800000,0xdb800000,0xdd000000)
    PSPermGen       total 16384K, used 7578K [0xd7800000, 0xd8800000, 0xdb800000)
    object space 16384K, 46% used [0xd7800000,0xd7f669c8,0xd8800000)
    Code Cache  [0xfc000000, 0xfc400000, 0xfe000000)
    total_blobs=188 nmethods=49 adapters=95 free_code_cache=33095232 largest_free_block=26368
    Dynamic libraries:
    *0x00010000 /usr/jdk/instances/jdk1.6.0/jre/bin/java*
    *0xff3a0000 /usr/lib/lwp/libthread.so.1*
    *0xff370000 /usr/jdk/instances/jdk1.6.0/jre/bin/../lib/sparc/jli/libjli.so*
    *0xff350000 /lib/libdl.so.1*
    *0xff200000 /lib/libc.so.1*
    *0xff390000 /platform/SUNW,SPARC-Enterprise/lib/libc_psr.so.1*
    *0xfe400000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server/libjvm.so*
    *0xff1d0000 /lib/libsocket.so.1*
    *0xff1f0000 /usr/lib/libsched.so.1*
    *0xff1b0000 /lib/libm.so.1*
    *0xff180000 /usr/lib/libCrun.so.1*
    *0xff160000 /lib/libdoor.so.1*
    *0xff120000 /usr/lib/libdemangle.so.1*
    *0xff100000 /lib/libkstat.so.1*
    *0xff000000 /lib/libnsl.so.1*
    *0xfef00000 /lib/libm.so.2*
    *0xff0c0000 /lib/libscf.so.1*
    *0xfefe0000 /lib/libuutil.so.1*
    *0xfeee0000 /lib/libgen.so.1*
    *0xfeeb0000 /lib/libmd.so.1*
    *0xfee90000 /lib/libmp.so.2*
    *0xfe390000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libverify.so*
    *0xfe2c0000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libjava.so*
    *0xfe280000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libzip.so*
    *0xfe260000 /usr/lib/locale/no_NO.ISO8859-1@bokmal/[email protected]*
    *0xfbfc0000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so*
    *0xfbe60000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcmq.so*
    *0xfbe30000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvcm.so*
    *0xfbe10000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvft.so*
    *0xd6d80000 /progs/spider/TIBCO/tibrv/8.3/lib/libtibrv.so*
    *0xfbfe0000 /lib/libpthread.so.1*
    *0xfbd40000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libmanagement.so*
    *0xfbd10000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libj2pkcs11.so*
    *0xfbc40000 /usr/lib/libpkcs11.so*
    *0xfbc20000 /usr/lib/libcryptoutil.so.1*
    *0xf27a0000 /usr/lib/security/pkcs11_softtoken.so*
    *0xf2770000 /usr/jdk/instances/jdk1.6.0/jre/lib/sparc/libnet.so*
    VM Arguments:
    jvm_args: -Dlog.dir=/data/flowlogs/testtool -Djava.rmi.server.codebase=file:///progs/spider/flow_home/Output/java/classes/ -Djava.security.policy=/progs/spider/flow_home/config/flow2/props/java.policy -Dproperty_file=testtool.properties -Dtestdata=/progs/spider/flow_home/test/framework/testtool
    java_command: flow.framework.componentserver.Server
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=/usr/jdk/jdk1.6.0_35
    PATH=/progs/spider/flow_home/bin:/progs/spider/flow_home/ant/bin:/usr/jdk/jdk1.6.0_35/bin:/usr/jdk/jdk1.6.0_35/jre/bin:/usr/bin:/usr/local/bin:/progs/spider/TIBCO/tibrv/8.3/bin:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/bin
    LD_LIBRARY_PATH=/usr/jdk/instances/jdk1.6.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.6.0/jre/lib/sparc:/usr/jdk/instances/jdk1.6.0/jre/../lib/sparc::/usr/lib/lwp:/progs/spider/TIBCO/inconcert/icapps/shared/native/lib:/progs/spider/TIBCO/tibrv/8.3/lib:/progs/spider/flow_home/lib/tibco:/progs/spider/TIBCO/inconcert/icapps/icjava/lib:/progs/spider/TIBCO/inconcert/server/ICFLOWNEWUTV/lib:/progs/spider/TIBCO/tibrv/8.3/lib
    SHELL=/bin/bash
    Signal Handlers:
    *SIGSEGV: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    *SIGBUS: [libjvm.so+0x8ca71c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    *SIGFPE: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    *SIGXFSZ: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    *SIGILL: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    *SIGQUIT: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
    *SIGHUP: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
    SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    *SIGTERM: [libjvm.so+0x794044], sa_mask[0]=0xffbffeff, sa_flags=0x00000004*
    *SIG39: [libjvm.so+0x7976b8], sa_mask[0]=0x00000000, sa_flags=0x00000008*
    *SIG40: [libjvm.so+0x1d0f7c], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c*
    ---------------  S Y S T E M  ---------------
    OS:                      Solaris 10 10/09 s10s_u8wos_08a SPARC
    Copyright 2009 Sun Microsystems, Inc.  All Rights Reserved.
    Use is subject to license terms.
    Assembled 16 September 2009
    uname:SunOS 5.10 Generic_142900-11 sun4u  (T2 libthread)
    rlimit: STACK 8192k, CORE 0k, NOFILE 65536, AS infinity
    load average:0,82 0,83 0,60
    CPU:total 2 has_v8, has_v9, popc, has_vis1, has_vis2, is_ultra3, is_sparc64
    Memory: 8k page, physical 2097152k(0k free)
    vm_info: Java HotSpot(TM) Server VM (20.10-b01) for solaris-sparc JRE (1.6.0_35-b10), built on Aug 28 2012 15:42:48 by "" with Workshop 5.8
    time: Thu Jun  6 07:45:16 2013
    elapsed time: 6 seconds
    Can any one help me what is happening.
    Regards,
    Satya Krishna Y
    Edited by: 1010262 on 06.jun.2013 07:55
    Edited by: 1010262 on 06.jun.2013 07:56

    > *# SIGSEGV
    Common cause is JNI
    >  /progs/spider/TIBCO/tibrv/8.3/lib/libtibrvj.so
    Looks like a non-standard library so it suggests JNI is in use

  • Asio Driver issue in Premiere Pro CC conflicting with all other media players on PC

    Whenever I have Premiere or audition or After effects opened---- should I want to play a media clip on J River Media center, or Windows Media Player, the Asio driver is locked by the Adobe products, so the other media players do not have access to it. This may be a new windows 8.1 phenomenon, as i never had this before with 64 bit Windows 7.
    I have had some success running the other media players on the lousey windows sound drivers, but they don't sound nearly as good as the Asio driver does, with its near zero latency.
    My sound card is a Lynx aes 16, and the Win 8.1 PC pushes the digital audio out to my Berkely DAC , then to separate mono bloc amps, into  Magnepan speakers as the reference audio system for my music and video editing....or for  entertainment listening :-)
    Does anyone have a solution that will force the Adobe CC software to release the Asio driver when I try to use J River Media center, or some other media player?

    I had this problem this evening 090813 after upgrading my Adobe Cloud Desktop. 
    I open Pro CC and had the  Dolby Audio Decode Licensing Restriction for (File name.......... )       Error
    Previous CC progs loaded and worked with problem.
    I uninstalled Pro CC - Restarted the computer - Re-installed Pro CC.
    Now working with no problem.
    Hope this helps.
    John

  • Problem with package creation

    Hi ,
    I created package name  BBP_ESI, with the following information:
    Appl. Component - MM
    software component - SAP_APPL
    Assign BBP_ESI as a sub package to PI-B2B .
    1, Where can i find  Allowed Objects types in the package creation ,i am using SAP  6.0 version .
    2, When i create a report and save it in this package BBP_ESI, its giving error Customer object PROG ZFCI_BBP_ESI_IDOC_SETUP cannot be assigned to package BBP_ESI . Please let me know why i am getting this error .
    Thanks In Advance .
    Regards,
    Neelima

    see SAP documentation for package naming convention:
    Packages
    The following namespaces are available for packages:
    Package names beginning with a letter from A to S, or from U to X.
      Package names beginning with these letters are reserved for objects of the SAP standard system from the SAP namespace. You cannot create customer objects or objects from prefix namespaces in these packages.
    Note that the package name must be no more than 30 characters long. The name of the main package should reflect the content of the package Adjacent packages should have similar names.
    The Transport Organizer records changes to objects in these packages, so that they can be transported.
    These packages belong to the "SAP" transport layer and are assigned to an SAP software component (such as SAP_BASIS, SAP_APPL).
    Package names beginning with Y or Z
      You can create customer-specific objects from the customer namespace in these packages.
    The Transport Organizer records changes to objects in these packages, so that they can be transported, provided the SAP System has been set up appropriately. (For more information, see Setting the System Change Option). These packages are assigned to the software component HOME.
    So create the packages accordingly...

  • Manual BRS

    Hi Friends,
    We are facing the following error while running manual BRS.
    1. Bank statement is run  thru FF67
    2. The above prog is run on SM35
    3. While doing so the entries which mismatch results the error and the prog stops.
    We have advised the client to check the bank statement manually before loading in FF67, to which they are not aggreeing. The client wants the details of all the mismatch entries from the system at a time, so that the same can be entered in the book of accounts before successfully running the BRS again.
    Request to advise if we can get all the mismatch entries from BRS. This will avoid manual verification as well as repeated running of BRS.
    Regards,
    Chinmoya

    Select the Bank statement in SM35 and Double click on that >  and goto the Screens tab  ....> Click the Fieldslist button. there you will get the details.
    Other wise  try FEBA.

  • Execute Query not working on custom forms

    Hi
    After upgrading from 11.5.10.2 and Oracle 9.2.0.5 to ATG6, AD6, oracle 10.2.0.4, Forms 6.0 (Form Compiler) Version 6.0.8.28.0 . The execute query (F11 & CTRL F11) is not working on custom forms. But after tabbing from one column to another column then press CTRL F11 is working.
    Please any one help me on this issue.
    Thanks
    sva

    Hi
    I found this error in the trace file. Please help me what is the problem, the data is there in the table.
    Out Argument 0 - Type: String Value: ORA-01403: no data found
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: parameter.G_query_find
    Out Argument 0 - Type: String Value: NULL
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND MESSAGE_CLEAR
    MCXQPBULKINVOICEENTER, -1, Built-In, Entry, -1196178744, USER_EXIT
    TSE FSERVER_START -1 1407 1279530838565801000
    TSE FSERVER_END -1 0 1279530838579778000MCXQPBULKINVOICEENTER, -1, Built-In, Exit, -1196091744, USER_EXIT
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_debug.clear
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_GROUP Built-in:
    In Argument 0 - Type: String Value: APP_DEBUG
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_debug.free.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing MESSAGE Built-in:
    In Argument 0 - Type: String Value: FRM-41003: This function cannot be performed here.
    In Argument 1 - Type: Number Value: 121
    Unhandled Exception ORA-100501
    State Delta:
    MCXQPBULKINVOICEENTER, -2, Trigger, Exit, -1190876744, ON-ERROR
    ##### CTIME STARTS HERE
    # 8 - MCXQPBULKINVOICEENTER:BLOCKNAME.RADIO_BUTTON81.1279530839956685000
    KEY Execute_query
    Error Message: FRM-41003: This function cannot be performed here.
    N-ERROR Trigger Fired:
    Form: MCXQPBULKINVOICEENTER
    State Delta:
    MCXQPBULKINVOICEENTER, -2, Trigger, Entry, 181183256, ON-ERROR
    MCXQPBULKINVOICEENTER, -1, Prog Unit, Entry, 181304256, /MCXQPBULKINVOICEENTER-3/P58_07_DEC_200909_04_40
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_standard.event. Event is ON-ERROR.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing ERROR_TYPE Built-in:
    Out Argument 0 - Type: String Value: FRM
    Executing ERROR_CODE Built-in:
    Out Argument 0 - Type: Number Value: 41003
    Executing ERROR_TEXT Built-in:
    Out Argument 0 - Type: String Value: This function cannot be performed here
    Thanks
    sva

  • Acrobat Pro 7

    Hi
    I'm hoping osmeone can help me. Everytime I open Acrobat PRO 7 it comes up wit an error saying the prog needs to close. This also happens if I go into a PDF file and try to open the prog that way. I have uninstalled and re-installed several times but the problem still happens. I also uninstalled Pro 7 and downloaded the trial version of Acrobat pro X but  get exactly the same problem.
    Can anyone of you experts help?

    Win XP also have a google Redirect virus so at the moment can't get into pc at all
    Steve Jelfs
    International Clinical  Manager, Defibrillation
    Cardiac Science Corporation
    Sent by Blackberry while travelling

  • 5.1 Audio issue in Premiere Pro CC

    Hello All,
    So I have the latest Premiere Pro CC with the most current updates and a Sony HD camera that records videos with 5.1 Dolby Digital sound. When I create a project and import the files using Media Browser, I get the error message: "Dolby Audio Decode Licensing Restriction for <file path>", I'm on a Windows 7 64-bit machine, the files are on M2TS format, I imported them from the camera to the computer using PlayMemories Home, the software also copies a M2TSMODD file to the same location. I've seen a lot of people complaining about this issue with CS6 but not CC, I've reinstalled the software twice now, is there anything I can do other than trying to extract the audio with another software and import the audio file? This is really a bummer.

    I had this problem this evening 090813 after upgrading my Adobe Cloud Desktop. 
    I open Pro CC and had the  Dolby Audio Decode Licensing Restriction for (File name.......... )       Error
    Previous CC progs loaded and worked with problem.
    I uninstalled Pro CC - Restarted the computer - Re-installed Pro CC.
    Now working with no problem.
    Hope this helps.
    John

  • Moving object to global namespace

    Hi
    I created an Include in a user exit functional module and saved in $TMP.  Now I am trying to move it to a package which was created in global namespace like /gc/zgfim, but it is giving me an error
    'Customer object PROG Z_FI_TEST_CONTRACT_AGREMENT cannot be assigned to package /GC/ZGFIM'. 
    Can someone tell me why I am getting this error or how to move this?

    Hi,
    i suppose you have edit rights for the namespace /gc/.
    It ist not possible to add an dev object to a package if the namespace of the object is diffrent from this of the package.
    I mean you have to rename the Prog Z_FI_TEST_CONTRACT_AGREMENT  in /gc/FI_TEST_CONTRACT_AGREMENT this works..
    If you are not the owner of the /gc/ namespace you can't change a package with this namespace. In this case i suppose you just develop an enhancement, so you need to create your own package for yours developmenst for example Z_FI_ENHANCEMENTS.
    Regards,
    Gianpietro

  • Cisco IPICS 4.5(1) audio issue

    Hello,
    After Cisco IPICS implementation, this work around 15 days. After that, our customer experienced an issue with the audio. I'll try to explain the behavior.
    When a user uses a Cisco IP Phone Service (on IP Phone 6921 & 7945) to communicate with Radios, the communication is success and we can see the led of E&M card that indicate communication, If we activate two or three IP Phones with the service and try again, all IP Phones and All radios can hear the message. The issue is when a user PTT on Radios, the message only hear on Radios but not on Cisco IP Phones, when we do this test the E&M card led not indicate communication only appear off.
    I tried running a debug "debug vpm signal" on Cisco IPICS GW and when the communications flow is Cisco IP Phone Service -> Radio, I received a lot of messages from the debug, but when the communications flows is from Radio -> Cisco IP Phone Service I didnt receive anything. 
    I tried replacing the E&M Cards and the behavior is the same, I tried too replacing cables (4 cables) between IPICS gw and Radio and still the same behavior.
    Do you have any idea about what happening? or is there missing configuration?
    Versions:
    Cisco IPICS 4.5(1)
    Radios TPH700
    Attached configuration:
    show running-configuration
    show version
    debug vpm signal (Cisco IP Phone -> Radios)
    debug vpm signal (Radios -> Cisco IP Phone)
    debug voip hpi checker (Radios -> Cisco IP Phone)

    I had this problem this evening 090813 after upgrading my Adobe Cloud Desktop. 
    I open Pro CC and had the  Dolby Audio Decode Licensing Restriction for (File name.......... )       Error
    Previous CC progs loaded and worked with problem.
    I uninstalled Pro CC - Restarted the computer - Re-installed Pro CC.
    Now working with no problem.
    Hope this helps.
    John

  • Standard program saving

    hi,
       I need to modify a standard program  /1BCDWB/IQG000000000038SSCR.I got the access keys and it got edited.
    but while i am trying to save that program,the following error occurs
    Object PROG /1BCDWB/IQG000000000038SSCR cannot be assigned to package ZPACKAGE
    Whether we cant modify this kind of programs or is there any opther way to modify and transport this object.

    Ramya,
    I guess you are trying to edit a query prorgram generated by the system. These generarted program cannot be assigned to Z Package - besides they do not have a package assignment first place.
    If you need some simple queries to be created; you can try SQVI. You can use this directly and helps to generate adhoc queries.
    Regards
    Kathirvel

Maybe you are looking for