If I have a program that runs in windows under the command prompt and on Mac in the Terminal window, can it be run in iOS

I have a program that is ran using the command line in windows and the terminal window on Mac or LInux. Is it possible to create an app for the iPad that could run this program. This program does require admin rights.

No.

Similar Messages

How to merge to frequencies together and play it? I have a program that outputs two numbers everytime and those numbers in Hz. I want to merge those two different frequencies and play the sound.

Hi there
I have a program that reads from a table done in excel and finds two numbers from the table(they're different all the time). Those numbers are represented in Hz. What I want now is how to merge those two numbers as frequencies and output them and hear them from the speaker as audio. I also have the part of hearing them done but I can't figure out a way to have it connected so that it doesn't matter which numbers come up, it'll update it accordinaly. I appreciate any helpers.
Thanks a lot

Then I'm not sure what you're doing, or what your definition of "add" is. Here is the example I posted, with Signal 1 at 250 Hz and Signal 2 at 500 Hz:
Message Edited by smercurio_fc on 01-15-2009 03:46 PM
Attachments:
add freqs.png ‏25 KB
add freqs.vi ‏123 KB

Running commands from the Command Prompt - Runtime.getRuntime().exec()

Hi there,
I'm already able to run several commands in the command prompt.
But my problem is that I need all the commands that I run share the same context.
If, for example, I run "cmd /c set HOME=C:" (1st command), I want to be able to access that variable the next time, so that later when I run "dir %home%" it shows the directories in c: (This is just a example this is not what I really want to do...)
I used code posted in a newsgroup (don't remember which)
This is the code I use to execute commands:
     private int execute(String command)
     int exitVal = 0;
try
String nomeOS = System.getProperty("os.name" );
String[] cmd = new String[3];
if( nomeOS.equals( "Windows NT" ) || nomeOS.equals("Windows 2000") )
cmd[0]="cmd.exe";
cmd[1]="/c";
cmd[2]=command;
else if( nomeOS.equals( "Windows 95" ) )
cmd[0]="command.com";
cmd[1]="/c";
cmd[2]=command;
if (rt==null)
     rt = Runtime.getRuntime();
          Process proc = rt.exec(cmd);
          CommandStream erro = null;
          // erros?
          if (proc.getErrorStream()!=null)
               erro = new CommandStream(proc.getErrorStream());
               erro.start();
// output?
CommandStream output = new
CommandStream(proc.getInputStream());
// arranque
output.start();
// erros???
exitVal = proc.waitFor();
     } catch (IOException e)
               System.out.println("Exce !!!" );
               e.printStackTrace();
     catch (InterruptedException ie)
               System.out.println("Ocorreu uma excep��o !!!" );
               ie.printStackTrace();
return exitVal;

My problem is bigger than setting a few parameters,
I'm doing a GUI to a CVS client and the problem is that some commands of CVS only work if you're in the right directory, or if you're authenticated, and all of this is easily done doing a series of execution:
In a command prompt opened I would:
set cvsroot=:pserver:lpinho@w2palf38:/project
cvs -d :pserver:lpinho:xxxxx@w2palf38:/project login
mkdir temp_my_proj
cd temp_my_proj
cvs checkout my_projectAll this would make what I wanted...
And there's another thing, when I set the envp, I get some errors like "cvs.exe is not recognized as an internal or external command" (the path went bye bye) and if I set the path (envp[0]="path=c:\cvsnt"), I'm able to run cvs but I get a crazy error "No such host is known" (I run exactly the same command in the command prompt and it works...)
Do you know any way of getting the current environment, and pass it as the envp parameter?
Thank You
Luis Pinho

Error while running a ODI scenario from command prompt

Hi,
I'm trying to run a ODI scenario from command prompt. I've edited the tnsnames.ora and odiparam.bat file with exact host and port details. Even though I'm facing the below error.
command:startcmd.bat OdiStartScen -SCEN_NAME=INT.CUSTOMER_STG -SCEN_VERSION=001 -CONTEXT=ICM -AGENT_CODE=KANBAN
Error: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:orcl
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
at com.sunopsis.sql.i.run(i.java)
Please help in resolving the error...
Thanks in advance.
Edited by: 894841 on Dec 22, 2011 11:15 PM

Hi,
Are you able to start the Standalone Agent(KANBAN) and test it in the Topology?
Check the value of the ODI_MASTER_URL variable in odiparams file(at the path <ODI_HOME>\oracledi\agent\bin) of the agent.
Specify the full the JDBC URL properly not like localhost(until the DB is on same machine as your ODI).

I have a program that requires Java 6. I am running 10.8.2, How do I remove Java 7 to run this program?

I have a program that requires Java 6. I am running 10.8.2, How do I remove Java 7 to run this program?

Try going to the Oracle site - they did have a page showing how to remove Java 7 using the terminal program.
I followed their instructions and it didn't work for me, but you may have better skills and luck than I.
This was my starign point;
http://www.java.com/en/download/help/mac_uninstall_java.xml
Let us know if this works.

I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close. How do I restart the ipad?

I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close. How do I restart the ipad?

Hi there, welcome to the site,
I have posted a link below which has instructions on how to do this. They are quite simple, so take a look.
iPad not responding
Regards,
Nathan

Hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number

hello ive been trying to get this matter token care of for the past 24 hrs and still no help im getting very upset now I paid 100 plus $$ to have this program that isn't even working I would like to speak to someone about on the phone I got a 1800 number for tech but everytime I call it hangs up and says to chat........ ive been doing that all day yesterday its kinda getting old telling the same thing over n over again so I would like some real live help a number I can call or someone can call me 402 802 1211 everytime I try to do something on this it ask for my serial num I put it in and it says invalid number and when I do my pics it has trail across them

Hi,
I'm sorry to hear that you are having problems but this is a user to user forum and only occasionally visited by Adobe staff. Depending on your version of Photoshop elements, you may be able to get help through the chat sessions starting here
https://helpx.adobe.com/uk/contact.html?promoid=KLXNA
If you give us details like your operating system, Photoshop elements version and the problem you ae having, someone may well be able to help you.
Brian

I have a program that requires Java...which won't open...says it can't detect it...I've uninstalled and re-installed but still the same problem.

I have a program that requires Java, but when I go to launch the program...the Java sign just keeps searching, but my computer says
that it can't detect Java..I have uninstalled and reinstalled Java, and its updates...any ideas? I can open this program at school, but not on my Imac.

Without an product info, such as OS, this is just a guess:
MadMAC0 posted at https://discussions.apple.com/message/20107182?ac_cid=tw123456#20107182 that:
Apple has posted (10/22/12) the approved solution for restoring the Java 6 plug-in:
Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality.

HT1310 do you have any programs that can hold the start up manager everytime when I turn on the computer?

Do you have any programs that can hold the start up manager everytime when I turn on the computer?

I am not sure but if they do have the way to do it, I would like to try. But I prefered the easy way ^_^
I do have intel iMac and the version of OS X is 10.9.1 .
Thank you so much

Is it possible to run a java program without using the command prompt?

Hi,
I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
Cheers

Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I had 4 installtion disk but the last installation disk is missing. I still allow to keep the photoshop , indesign and illustrator software in the computer but i can only keep that on a trial of 30 days. In order to use it permenantly, I have to activate

I had 4 installation disk but the last installation disk is missing. I still allow to keep the Photoshop , Indesign and illustrator software in the computer but i can only keep that on a trial of 30 days. In order to use it permanently, I have to activate the Suite. As the phone activation service is no longer available. I try the online activation as mention in the phone message when I tried to call, but is not successful@ as it didn't bring to an activation page. What should I do to activate it or solve the problem?

There should be an option tro activate when you run any of the installed programs.

I have an IPAD 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds)

I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?

30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not.

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I cant get a reset all of my credentials dont work.

I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I can’t get a reset all of my credentials don’t work. Now all my apps won’t work. it looks like they load for half a second then disappear. What can I do?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

If I have a program that runs in windows under the command prompt and on Mac in the Terminal window, can it be run in iOS

Similar Messages

Maybe you are looking for