If I send a text and my number is blocked will it still say delivered at the bottom of the text?

If I send a text and my number is blocked will it say delivered at the bottom of the text?

Yes. If another iPhone user has blocked you, you have no way of knowing.

Similar Messages

  • I have a white iPhone 4S. For some reason I cannot MMS only one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text.why!

    I have a white iPhone 4S. For some reason I cannot send media (picture,video,etc.) with one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text message. Why is this happening!? It happens connected to wifi and not connected to wifi.
    I appreciate the help, thank you!

    If it says "Delivered" under it to begin with, then you're not sending it as an MMS, you're sending it as an iMessage. It's entirely possible the problem is on the receiving end.

  • My daughter forgot her passcode, phone is disabled.  I attempted restore procedures by placing phone in restore mode and syncing to original computer, but it still says I need the passcode and does not offer option to restore as new.  Verizon can't help.

    My daughter forgot her passcode.  Phone is now disabled.  I attempted restore procedures by placing phone in restore mode and connected it to the computer / itunes with which it was originally synced.  itunes recognized phone in restore mode and said I must restore.  I clicked restore, restore and update.  Update began, itunes recognized the device by name and gave error message that stated I must have the passcode to restore.  There was no option to restore as new.  I attempted to restore the iphone 4s on another computer by instaling itunes, but same error messages appeared.  I contacted Verizon and they said they could not help me.  The nearest apple retail store is over 40 miles away.  PLEASE HELP!

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    Phone A = phone with information you want duplicated
    Phone B = phone that you want to copy from A
    Backup Phone A.
    Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
    When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
    After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

  • Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

    i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
    just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

  • If I travel outside the US with an unlocked iphone and use a local SIM will I still receive iMessages sent to my US number when wifi is activated?

    If I travel outside the US with an unlocked iphone and use a local SIM will I still receive iMessages sent to my US number when wifi is activated?

    Ok, one of my problems is that when I arrive it will take me a few weeks to get a social security number and only t-mobile will give me a sim without a ssn - but edge for a few weeks will be better than no iPhone.
    Unless someone out there can suggest an alternative?

  • TextEdit.app is corrupt. I have tried repairing and I have tried reinstalling but it still says You can't open the application TextEdit.app because it may be damaged or incomplete.

    TextEdit is  not working. I have tried repairing and I have tried reinstalling but it still says "You can't open the application TextEdit.app because it may be damaged or incomplete."
    Can anyone give me some other ideas as to how to fix.  Thanks.

    Thats the first thing I tried last night. And reinstalled just textEdit but no luck, then I deleted TextEdit and reinstalled it again and I was still getting the same message.  Tried pacifist this morning again but this time I tried reinstalling the whole apps package half way through its says it cant reinstall due to multiple missing files.
    Tried the repair option on the OS  disc it says everything is fine

  • HT5312 If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

    If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?

    You will still have them on the old one i guess

  • I recently got a new HP PC 500-267c/64 bit Windows 7 computer. I installed Creative Suites CS5 and I cannot scan into Photoshop? It says I need the Twain Plug In. How do I get it?

    I have a new HP PC 500-267c/ Windows 7/64 bit c omputer. I installed Creative Suites CS5 and I cannot scan into Photoshop.
    It says I need the Plug In Twain to scan into Photoshop and can download it but nothing else. How and where
    do I find the download?

    http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html#main_Photoshop_CS5_a nd_TWAIN
    There's no 64 bit TWAIN so you need to use the 32-bit version of Photoshop. Personally I'd recommend that you use the scanner software as a standalone application and forget TWAIN, which is rapidly becoming obsolete and more or less abandoned everywhere. All it does is call up the very same scanner software, only from within the PS UI, and tying up Photoshop in the process.

  • I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

    What are you getting on the TV?  Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'?  Or are you seeing the spiral galaxy desktop?  If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?

  • Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

  • I bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?

    i bought windows 7 download online and started setting up boot camp but it says to insert the windows 7 disk so how do i do this?
    plz help me

    Hi Jaimie,
    To install Windows via Boot Camp you will need to have a copy of Windows on a physical dvd disc.
    If your purchase provides you with an ".ISO" file then you can simply burn this to a DVD and then follow the standard Boot Camp installation instructions.
    Boot Camp instructions: http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    If you get stuck, just let me know the website you purchased Windows 7 from and I might be able to help you out.
    Cheers

  • I have a macbook pro and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    I have a macbook pro, and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    Mdjohnson99,
    have you followed the steps on this Adobe page?

  • I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

    i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

    yes you can do it and not void the warranty.  Those are the only hardware changes that Apple permits.  Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

  • I cant connect to my wifi due to the fact that it says its a wrong password and ive tried resetting all the ways i can and it still says i have the wrong password what can i do

    i cant connect to my wifi due to the fact that it says its a wrong password and ive tried resetting all the ways i can and it still says i have the wrong password what can i do

    Do other devices connect to the same wifi router?
    Have you tried powering off and then back on the router?
    Did you connect before OK?
    Have you reset the iPod?
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Reset network settings: Settings>General>Reset>Reset Network Setting
    -The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Designer beginner's question: How to populate form with XML web service output?

    sorry, here is yet another Adobe Designer beginners question: <br /><br />My form uses a webservice data connection which returns <br />an xml-string like this: <br /><br /><?xml version="1.0" encoding="utf-16"?> <br /><CurrentWeather> <br />  <Locat

  • Reloading footage doesn't refresh the footage's color profile

    Hello. I have a PSD with lots of layers loaded into AE. The PSD originally had Adobe RGB embedded. After doing animations I converted the PSD to sRGB and added a couple of new layers. When I load the new layers into AE they have the right profile (sR

  • 24p from a DVX 100 - What are the best ways to Import / Export

    Hi Everyone, A friend of mine did some shooting on his DVX100 on 24p. He then captured them to avi files. I have the files on my hard drive. What is the best settings when importing these files and what should my settings be for exporting. I want to

  • Smartform Graphics problem

    hi , I am facing one problem with the graphics I have to Print the logo of my company when i put this logo in the graphics i can see it in the form painter but it is not visible in the print preview . The same problem occurs with standard logos also

  • What is source client of Solution Manager?

    Hi I wanted to apply note 990534 to configure MOZ.Can any body tell what exactly is source client of Solution Manager? Regards Arati